Dobinsons GS59-713 pair of shocks for rear of Toyota Sequoia

Toyota Sequoia Dobinsons 2.5" Suspension

Toyota-Sequoia-Dobinsons-2.5-inch-lift-front-and-rear-1

Toyota-Sequoia-Dobinsons-2.5-inch-lift-front-and-rear-2

Dobinsons Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8 (All Options)

Suits 2008-2022 Toyota Sequoia 4×4 V8 models
Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
Coils are specifically suited to the additional accessory load (weight) on the vehicle
Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
Select from Twin Tube or IMS Monotube struts and shocks (more details below in description)
Does not suit rear air suspension equipped models
2.5″ rear lift height requires shock extensions with twin tube shocks for proper travel, add it in the drop-downs below
Front IMS struts assembly instructions

From $1,470.00

In Stock

Select Front Lift Height

C59-476 - 1.75" lift
C59-720 - 2.5" Lift

Select Front Struts

Choose from the standard twin tube struts or the higher performance adjustable height IMS Monotube
GS59-710 - Twin Tube Struts, fixed mount
IMS59-60710 - Internal resi Monotube Shocks, Internal Floating Piston, adjustable height, bigger pistons, higher performance

Select Rear Lift Height

C59-477 - 1.75" Rear Lift
C59-719V - 2.5" Rear Lift

Select Rear Shocks

Dobinsons rear shocks work with 1.75" and 2.5" rear lift height
GS59-713 - Twin tube heavy duty nitrogen charged shocks
IMS59-60713 - Internal Resi Monotube 2.6" body shocks with (IFP) internal floating piston, higher performance, extended travel

Add Rear Shock Extensions for 2.5 inch lift?

If you've selected the GS59-713 twin tube rear shocks, this kit is required if lifting 2.5" in the rear so that the shocks will ride at the proper height. The IMS59-60713 are longer and do not require extensions

Add New Strut Mounts and/or Assembly?

Here you can add new strut mounts and hardware, or also have the struts pre-assembled prior to shipping

Add a Diff Drop Kit?

For the 2.5" front lift, it's recommended to run a diff drop kit to reduce the CV angles

Add New Upper Control Arms (UCA's)?

For the 2.5" front lift, it's highly recommended to add new UCA's for proper steering geometry and alignment. Can also be used on 1.75" lifts too.

Add Front Bump Stops?

If you go hard in this heavy vehicle, you should upgrade your bump stops up front to prevent harsh bottom outs and also protect your suspension investment. Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering

Add Front Lean Spacer?

This is a 1/4" thick alloy spacer that adds 1/2" of lift height on the side it is put on. This is usually ordered to correct a lean after a suspension has been installed and allowed to settle. Some choose to buy it in advance to have it on hand just in case.

Add Firestone Airbag Kit?

If you regularly tow with your Sequoia and need additional rear load support, this Firestone Ride-Rite kit goes inside your rear coils, and you can add or remove air pressure to them as needed.

Add New CV Boots?

When lifting an older vehicle, the age of the CV boots will show very quickly due to the new ride height. Changing out all the CV boots may be necessary depending on the age and mileage

Upgrade Front Brakes?

This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors (requires 18" wheels for caliper clearance)

Upgrade Rear Brakes?

SKU: 2NDGENSEQUOIAKIT Categories: Dobinsons, Full Suspension Kits, Full Suspension Kits - Sequoia 2nd Gen, Sequoia 2nd Gen (2008-2022), Suspension Tags: c59-476, c59-477, GS59-710, gs59-713 Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons Sequoia Lift Kit, Dobinsons offer this complete 1.75″ to 2.5″ suspension system for the 2008 to 2022 models with the 5.7L V8 looking to freshen up their suspension as well as add ground clearance. This does not suit vehicles that come with factory Airbag suspension.

For the 2nd Gen Sequoia 2.5″ lifted coils, but also requires shock extensions due to the added lift height. Now available from Dobinsons.

The fullsize SUV Toyota Sequoia has now been around since 2008 and a lot of them have really worn out suspension. Dobinsons has been offering a Sequoia Lift Kit for many years now, but in 2020 they also came up with a 2.5″ front and rear Sequoia Lift Kit option. Being one of a small few brands in the world offering a replacement suspension for this vehicle, check out all the options Dobinsons has to refresh the suspension on your Toyota Sequoia.

For an itemized list of all Dobinsons Sequoia products, click here: https://exitoffroad.com/product-category/toyota/sequoia/sequoia-2nd-gen/

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

Dobinsons IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micro-polished, hard chromed and heat treated shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

**Photo for illustration purposes only

2008 Toyota Sequoia Lift Kit
2009 Toyota Sequoia Lift Kit
2010 Toyota Sequoia Lift Kit
2011 Toyota Sequoia Lift Kit
2012 Toyota Sequoia Lift Kit
2013 Toyota Sequoia Lift Kit
2014 Toyota Sequoia Lift Kit
2015 Toyota Sequoia Lift Kit
2016 Toyota Sequoia Lift Kit
2017 Toyota Sequoia Lift Kit
2018 Toyota Sequoia Lift Kit
2019 Toyota Sequoia Lift Kit
2020 Toyota Sequoia Lift Kit
2021 Toyota Sequoia Lift Kit
2022 Toyota Sequoia Lift Kit