Full Suspension Kits - Sequoia 2nd Gen

Showing all 8 results

Sequoia 2nd Gen (2008-2022)
Dobinsons Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8 (All Options)
- Suits 2008-2022 Toyota Sequoia 4×4 V8 models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Select from Twin Tube or IMS Monotube struts and shocks (more details below in description)
- Does not suit rear air suspension equipped models
- 2.5″ rear lift height requires shock extensions with twin tube shocks for proper travel, add it in the drop-downs below
- Front IMS struts assembly instructions
From $1,470.00 Select options
Sequoia 2nd Gen (2008-2022)
Ships FREE !!
within 48 US States
Dobinsons IMS Sequoia Lift Kit 1.75″-2.5″ for 2008-2022 5.7L V8
- Fully rebuildable and re-valvable monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit air suspension equipped models
- Dobinsons IMS rear shocks are longer than the twin tubes, 343mm compressed length, 489mm extended length
- Front IMS struts assembly instructions
From $2,180.00 Select options
Full Suspension Kits - Sequoia 2nd Gen
Ships FREE !!
within 48 US States
Dobinsons 2.0-3.0″ Pre-Assembled MRA Coilovers for Toyota Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Coils are teal. Struts are black
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- All are assembled at the standard coil seat height, you adjust on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Front coilover assembly instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
$2,185.00 Select options
Full Suspension Kits - Sequoia 2nd Gen
Dobinsons 1.75-3.0″ Pre-Assembled IMS Coilovers for Toyota Sequoia 08-22
- Suits Toyota Sequoia 2008-2022 4×4 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Select your desired lift height and tell us your weight – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
- All are assembled at the requested clip height in the drop box
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 615mm extended, 445mm compressed strut lengths
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment, does require lower mount clearancing
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes – Sequoia IMS coilovers use a slightly different coil seat as shown in secondary photos
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
- Add an optional lean correction spacer for the driver’s side here
$1,370.00 Select options
Sequoia 2nd Gen (2008-2022)
Ships FREE !!
within 48 US States
Dobinsons MRA Sequoia Lift Kit 2.0″-3.0″ for 2008-2022 5.7L V8
- Suits 2008-2022 Toyota Sequoia 4×4 Models
- The front coilovers can be run from 2″ to 3″ of lift and anywhere in between
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Sequoia? This is your answer
- Coils are teal. Struts are black
- Includes C92-3016650 Front Coil Springs, Inner Diameter – 3.0″, Length – 16″, Spring Rate – 650lb/in
- All are assembled at the standard coil seat height, you adjust on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Choose what rear height you’d like to go with the front
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Front coilover assembly instructions
- Does not suit air suspension equipped models
From $3,940.00 Select options
Sequoia 2nd Gen (2008-2022)
Dobinsons Stock Height Twin Tube Sequoia Suspension Kit for 2008-2022
- Suits Toyota Sequoia models from 2008 to 2022
- Complete suspension kit for on and Off Road Use, fine tuned to match the vehicle
- Coils are stock height replacements front and rear to freshen up the suspension back to where it was when new
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Does not suit rear air suspension equipped models
- If assembling the front struts yourself, remove the silver aluminum droop spacer from the assembly process, so that the coil stays captured in the mount properly
From $1,470.00 Select options
Full Suspension Kits - Sequoia 2nd Gen
Ships FREE !!
within 48 US States
3″F / 2″R SST Lift Kit – Toyota Sequoia 2008-2022
- Safely lift your 2008-22 Toyota Sequoia 3 Inches front and 2″ rear
- Fits 2WD and 4WD
- Works only in conjunction with stock suspension
- Allows for up to a 35×12.50 tire
- Retains factory steering radius
- Includes important front differential drop kit
- Includes limited lifetime warranty
- *Not for use on vehicles with adjustable rear suspension or TRD Pro models
- Installation Instructions
$499.95 Add to cart
Sale!
Pro Comp
Pro Comp 65225 2.5″ Leveling Kit – Sequoia and Tundra
- Fits 2007 to 2021 Toyota Tundra
- Fits 2008 to 2022 Toyota Sequoia
- Level Lift Front Strut Spacers
- Includes Diff Drop Kit
- Lift Height: 2.5 Inch
- Max Tire Size: 33 Inch
- Easy to return to stock height
- View/Download Installation Instructions
Original price was: $179.99.Current price is: $95.00. Add to cart