Your cart is currently empty!
within 48 US States
Dobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2003-2009 (0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the 4th Gen 4Runner 2003-2009
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- Common installation instructions
From $2,700.00
In StockStock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-238 - Stock front end, low height 3/4" to 1"
C59-296 - Stock front end, 1.5" lift
C59-300 - Stock front end, 1.75-2.0" lift
C59-302 - Stock - 2.5" | with 110-150lbs - 2"
C59-314 - Stock - 3" | with 110-220lbs - 2.5"
C59-350 - With 220-300lbs - 1.5" | Heavy rate coils
C59-352 - With 220-300lbs - 2" | Heavy rate coils
C59-354 - With 220-300lbs - 2.5" | Heavy rate coils
Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-238 - Stock front end, low height 1/4-1/2"
C59-296 - Stock front end, 1.0" lift
C59-300 - Stock front end, 1.5" lift
C59-302 - Stock - 2.0" | with 110-150lbs - 1.5"
C59-314 - Stock - 2.5" | with 110-220lbs - 2.0"
C59-350 - With 220-300lbs - 1.5" | Heavy rate coils
C59-352 - With 110-220lbs - 2.0" | Heavy rate coils
C59-354 - With 220-300lbs - 2.0" | Heavy rate coils
C59-323 - Stock height up to 1/2" lift
C59-599 - 3/4-1" with stock weight
C59-505 - 1.25-1.5" with stock weight
C59-325 - 1.75-2" with stock weight
C59-327 - 2" with 200-400lbs weight
C59-329 - 2" with 500-800lbs weight
C59-331 - 2" with 800-1200lbs weight (teal only)
C59-675V - 2.5" long travel, stock weight
C59-677V - 3" long travel with stock weight, 2.5" with 200-400lbs weight
C59-701V - 3" long travel, 300-600lbs weight
C59-749V - 3" long travel, 800-1000LBS super extra heavy
C59-849V - 3" long travel, 1000LBS+ constant rear load (TEAL ONLY)
MRA59-A701 - MRA 3-way adjustable w/resi monotube (0-3" lift)
MRA59-A575 - MRA 3-way adj w/resi monotube for LONG TRAVEL lifts only, not for KDSS
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift
Sport versions have 13.3" diameter calipers, regular are 12.55". You must verify that size before ordering
Description
Dobinsons offers this complete MRA suspension system for the 2003 to 2009 Toyota 4Runner 4th Generation 4.0L V6 and 4.7L V8, with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact us directly if you have questions before ordering.
With this page, you can build your own Dobinsons Toyota 4runner MRA lift kit for your Toyota 4Runner 4th Gen model, from 2003 to 2009. There are many ways to outfit your Toyota 4Runner, all of which could possibly add weight and change the dynamics of your vehicle and the way that it drives. Choosing the correct suspension is paramount while shopping around, so be sure to check out all the options we here at Exit Offroad list for the 4th Gen 4Runner. We have conveniently put all of the options together on this one page. All you’ll need to do is select the appropriate parts to choose what you would like to add to your vehicle.
Check out installation instructions for non-standard parts here: https://exitoffroad.com/instructions/
Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
Built on the back of the race winning Monotube Remote Reservoir (MRR) shock absorbers, Dobinsons new range of MRR Adjustable shock absorbers combine the best in high performance race-bred Monotube technology, with an all new 3-way damping adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR shock absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.
The new 6063 honed aluminum reservoir, revised light-weight floating piston, Carbon Fibre/PTFE/Disulphide composite wear band, improved 3-stage sealing system and the ability to run lower gas pressure with the addition of the reservoir compression adjuster, have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and damping performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.
The Micro-polished, hard chromed and heat treated shock shaft, revised CNC aluminum high flow race piston, and DOM Seamless tubing body provides the ultimate in performance and off-road durability. The 3-way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable. Enjoy the ride…
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.
All Dobinsons Toyota 4runner MRA lift coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
Vehicle Suitability:
2003 Toyota 4Runner Lift Kit
2004 Toyota 4Runner Lift Kit
2005 Toyota 4Runner Lift Kit
2006 Toyota 4Runner Lift Kit
2007 Toyota 4Runner Lift Kit
2008 Toyota 4Runner Lift Kit
2009 Toyota 4Runner Lift Kit
10 reviews for Dobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2003-2009 (0-3.5″)
You must be logged in to post a review.
You may also like…
-
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
- Suits 2000-2024 Tundra, 2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
- Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all. Inspect your vehicle before ordering
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation – Installation Video
- Satisfaction Guarantee
- Lifetime Warranty
- Click here for instructions
(12 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDirt King Tubular Ball Joint UCA’s Pair – FJ Cruiser 4Runner GX470 GX460
- Suits 4th and 5th Gen Toyota 4Runner from 2003 to 2024 2WD and 4WD, Toyota FJ Cruiser all years, Lexus GX470 and GX460 all years
- CAD designed
- Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled with heavy duty Moog ball joints for fast installation
- Probearing Pro 2 Series bushings (new for 2024)
- Maintenance Free Bushings
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Powder coated black
- Includes Ball Joint Caps
- Installation Instructions
- Proudly made in the USA
(4 reviews) -
TimbrenFREE SHIPPING
within 48 US StatesTimbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series
-
Specs:
- 2,000 lb capacity
- 4,800 lb bump load capacity
- Overall kit height = 5”
- Total deflected (compressed) height = 2.75”
- Amount of deflection (compression) = 2.25”
- Click here for instructions
- Installation video from Exit Offroad
- Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs. Timbren make 2 options, they do not include any longer bolts which may be required
- A25722-90F00 (1/2″ spacer)
- A25723-90AD00 (1″ spacer)
(13 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDirt King Boxed UCA’s Pair with Uniballs – FJ Cruiser 4Runner GX470 GX460
- Proudly made in the USA
- CAD designed, Boxed plate construction, Professionally MIG welded
- 4130 chromoly uniball cups, 1” FK uniballs, 17-4 stainless steel misalignment spacers
- Military grade F911 hardware, Brushed stainless steel logo plates
- Preassembled for fast installation
- Grease fitting ports for easy servicing of bushings
- Zinc plated components for corrosion resistance
(4 reviews)
Jacob (verified owner) –
It’s exactly what I wanted.
Kenneth (verified owner) –
It’s exactly what I wanted.
Scott (verified owner) –
Very fast delivery.
Nathan (verified owner) –
Just what I needed.
Edward (verified owner) –
Very fast delivery.
Jeremy (verified owner) –
Very fast delivery.
Steven (verified owner) –
Value for money, super satisfied.
Aaron (verified owner) –
I received it really fast.
Adam (verified owner) –
This is my go-to now for off road parts.
Bryan (verified owner) –
Good quality, really nice.