Your cart is currently empty!
Full Suspension Kits - 4th Gen 4runner
Showing all 11 results
-
Suspension
Dobinsons Lift Kit for Toyota 4Runner 4×4 2003-2009 (All Options 0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- You can choose from Dobinsons Classic Twin Tube Shocks, IMS Monotube, or MRA remote resi shocks with 3-way valving adjustment
From $930.00 Select options -
Suspension
Dobinsons IMS Lift Kit for Toyota 4Runner 4×4 2003-2009 (0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- For 2003-2009 Toyota 4Runner 4×4
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
From $1,500.00 Select options -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA Lift Kit for Toyota 4Runner 4×4 2003-2009 (0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- Common installation instructions
From $2,700.00 Select options -
Full Suspension Kits - 4th Gen 4runnerETA is mid-May 2024
Dobinsons 1-3.5″ Pre-Assembled IMS Coilovers for Toyota 4Runner 4th Gen
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
$1,165.00 Select options -
Full Suspension Kits - 4th Gen 4runnerShips FREE !!
within 48 US StatesETA is Summer 2024Dobinsons 1-3.5″ Pre-Assembled MRA Coilovers for Toyota 4Runner 4th Gen
- Suits 2003-2009 Toyota 4Runner 4th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks
$1,795.00 Select options -
Pro Comp
Pro Comp 65205 2.25″ Leveling Kit – 4Runner Tacoma FJ GX470 GX460
- Fits 2003 to 2009 Toyota 4Runner 4th Gen
- Fits 2010 to 2024 Toyota 4Runner 5th Gen
- Fits all Lexus GX470 and GX460 WITHOUT adjustable suspension
- Fits all FJ Cruiser
- Fits 2005 to 2023 Toyota Tacoma 2nd and 3rd Gen
- Level Lift Front Strut Spacers
- Includes Diff Drop Kit
- Lift Height: 2.25 Inch
- Max Tire Size: 32 Inch
- Easy to return to stock height
- If your vehicle has XREAS or adjustable height suspension, you cannot use this kit
- View/Download Installation Instructions
Original price was: $179.99.$95.00Current price is: $95.00. Add to cart -
FoxShips FREE !!
within 48 US StatesFox 2.5 Factory Race Series Coilover IFP Shock Set – 883-02-025
- Suits 5th Gen Toyota 4Runner 2010-2024 0-3″ lift
- Suits 4th Gen Toyota 4Runner 2007-2009 0-3″ lift
- Suits Toyota FJ Cruiser 2006-2016 0-3″ lift
- Suits Toyota Tacoma 4×4 2005-2015 0-3″ lift
- Suits Toyota Tacoma 4×4 2016-2023 0-2″ lift
- Suits Lexus GX470 all years 0-3″ lift
- Suits Lexus GX460 all years 0-3″ lift
- Sold as a Pair, enough for 1 vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilovers comes preset to the taller lift height right out of the box – may need to adjust depending on added weight or engine size
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Front coilover shocks
- For up to 3 inch lift
- 2.5 inch smooth bore zinc plated seamless steel body
- Zinc-plated and double-clear coated body for long lasting finish
- Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
- Black-anodized, CNC-machined 6061-T6 billet aluminum components
- Application specific, adjustable 3.0 Eibach® racing springs
- 7/8″ hardened NitroSteel® Steel carbon shafts
- 6061-T6 hard-anodized, high flow aluminum piston
- Application specific valving to maximize performance
- Redundant sealing pack system main seal, wiper seal, scraper seal
- JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- PTFE-lined, heat-treated, alloy steel spherical bearing
- Ride height preload ring adjustment
- Extended: 22.52 in.
- Collapsed: 17.58 in.
- Stroke: 4.93 in.
- Top mount: OEM
- Bottom mount: eyelet
- Sold in pairs
- Note: requires aftermarket upper control arms
- Installation Guide
- Link to buy Preload Wrench
- Link to buy Back Up Wrench (remove preload)
- Exploded View Diagram
- Warranty Information
$1,499.95 Add to cart -
BilsteinShips FREE !!
within 48 US StatesBilstein 47-309975 Front 6112 Series Kit
Original price was: $966.21.$826.00Current price is: $826.00. Read more -
FoxShips FREE !!
within 48 US StatesFOX 2.0 Performance Series Coilover IFP Shock – 985-02-002
- Application: Toyota Tacoma 2005-2023 (0-2″), Toyota FJ Cruiser 2006-2009 (0-2″), Toyota 4th Gen 4Runner 2003-2009 (0-2) – see full list down below
- Sold Individually – You will need to order 2 for one vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilover comes preset to the taller lift height right out of the box
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
- Body Plating: Clear-anodized for a durable finish
- Reservoir: Internal IFP mono-tube reservoir design
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 5/8″ hard chrome plated heat-treated alloy steel
- Piston: Race-developed high-flow piston design
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: Large diameter, heavy-duty spherical
- Adjustments: Ride height preload ring
- Extended: 21.190″
- Compressed: 16.600″
- Travel: 4.590″
- Top Mount: OEM
- Bottom Mount: Eyelet
- Installation Guide
- Link to order Fox Spanner Wrench to adjust 2.0 Coil Overs
- Exploded View Diagram
- Warranty Information
- Sold Individually – You will need to order 2 for one vehicle
$549.95 Add to cart