Dobinsons 2.0" MRA Lift Kit Toyota Tacoma 1998 to 2004 with Blocks or AAL

Ships FREE !!
within 48 US States

Dobinsons 2.0″ MRA Lift Kit Toyota Tacoma 1998 to 2004 with Blocks or AAL

Suits 1998 to 2004 Toyota Tacoma 4×4 Extra/Double Cab and 4×2 Prerunner Models (4×2 lift more due to less weight up front)
Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
Coils are specifically suited to the additional accessory load (weight) on the vehicle
3-way adjustable valving – adjust high and low speed compression and rebound
Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
20 Stage Low Speed Compression – For creepy crawling and cornering
15 Stage Rebound – Control your coils, prevent bucking
50mm CNC Machined High Flow Billet Aluminum Race Piston
3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
Upgraded 3 Stage FKM‐HNBR Sealing System
TSUGAMI™ CNC machined components for precise tolerances
Parker™ Braided High Pressure Hoses
5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
T6 6061 Height Adjustable Spring Seat
Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
60mm Full 6063 aluminum remote reservoir
Lightweight CNC Machined Low Friction floating piston
High Quality O.E.M. Grade Natural Rubber Bushings
Single Piece Lower Leg
EDP Surface Protection
Direct Bolt-On Design
CNC TIG Precision Welded Body End Mounts
Fully Rebuildable Design
Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
Full 2 year limited warranty, no set rebuild time period
Instructions for setting coil seat height
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Includes 2 Front IMS Struts, 2 Rear IMS Shocks, 2 Front Coil Springs (a pair), and multiple Rear Lift Options
It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel and alignment

From $2,700.00

In Stock

Select Front Coil Springs

C59-276 – 1.5″ with stock weight (Teal or Black only)
C59-134 – 1.5″ with bumper and winch
C59-134 – 2.0″ with stock weight
C59-300 - 2.0" with heavy load bumper and winch (200lbs or more)

Select Coil Spring Color

Choose what color you would like. If that is not available, we will reach out with an ETA and other options in stock

Select Front Struts

Select Rear Shocks

Select Dobinsons Quick Ride Kit

If you'd like to use the Dobinsons block and u-bolt kit, select which one here

Select Wheeler's Add-A-Leaf Kit

If you'd prefer to use a Wheeler's Add-A-Leaf Kit instead of Dobinsons quick ride kit, select that here.

Add Strut Mounts or Assembly?

Select if you'd like to add new strut mounts only, or also have the coils and struts assembled prior to shipping

Add Front UCA's?

New UCA's will correct the geometry of the alignment by allowing addition caster and camber correction. These are recommended when running MRA front struts

Add Rear Bump Stops?

These tie into the u-bolts to replace the factory bump stop and provide a progressive rate bump, much more comfortable during a bottom-out

Add New CV Boots?

Since these trucks are pretty old now and you'll be replacing the suspension already, consider replacing the CV boots while you're in there

SKU: 1STGENTACOMRAKIT Categories: Dobinsons, Exceptions, Full Suspension Kits, Full Suspension Kits - Tacoma 1st Gen, Suspension, Tacoma 1st Gen (1996-2004) Tags: 1st gen, mra59-a222, Quick Ride, taco, tacoma Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons offer this complete 2.0″ MRA suspension system for the 1998 to 2004 Toyota Tacoma 4×4 Extra/Double Cab and 4×2 Prerunner Models (4×2 lift more due to less weight up front), designed to give a great ride front and rear, for vehicles looking for lift, with or without a heavy aftermarket bumper or winch on the front, and standard load in the rear. The kits supplies new front struts and coils, new rear shocks with 2″ lift blocks and zinc coated u-bolts. Choose the appropriate coils that suits the amount of weight you carry on the front end.

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRR Adjustable Shock Absorbers combine the best in high performance race-bred Monotube Technology, with an all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.

The Dobinsons MRA59-A222 Adjustable Remote Reservoir Lift kit utilizes large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling.

The Dobinsons MRA59-A222 Features:

10 High Speed Compression Adjustments

20 Low Speed Compression Adjustments

15 Rebound adjustments

What this means is that you are able to tune your suspensions to accurately adjust to your current driving conditions. No Tools are needed to adjust the suspensions compression and rebound settings, although the kit does come with a handy tool to reach the adjusters better if needed. The rebound compression on struts is done at the top of the strut, and the rebound adjustment on the shocks is done at the base mount of the shock. The MRA features an easy to adjust knob on the reservoir for high and low speed compression adjustment. Due to the adjustable design there is no longer the need to choose between the firmer and comfort valved shocks, you now have the option to manage your valving on the fly, eliminating the hard choice of weather to buy your suspension based on daily comfort or having suspension heavy duty enough for your hauling needs.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

1996 Toyota Tacoma Lift Kit
1997 Toyota Tacoma Lift Kit
1998 Toyota Tacoma Lift Kit
1999 Toyota Tacoma Lift Kit
2000 Toyota Tacoma Lift Kit
2001 Toyota Tacoma Lift Kit
2002 Toyota Tacoma Lift Kit
2003 Toyota Tacoma Lift Kit
2004 Toyota Tacoma Lift Kit