Dobinsons MRA struts coilovers assembled with teal coils

Dobinsons MRA struts coilovers assembled with red coils

Dobinsons MRA struts coilovers assembled with black coils

Dobinsons MRA59-A700 MRA59-A574 installed MRA

Ships FREE !!
within 48 US States

Dobinsons 2-3.5″ Extended Travel Pre-Assembled MRA Coilovers | 4Runner 5th Gen

Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models – Extended Travel
Looking for a quick and easy way to lift your 4Runner? This is your answer
A 4×2 model lifts 1″ extra with the 4×4 lift heights
Select your desired lift height and spring rate – we’ll take care of the rest!!
Dobinsons MRA are height adjustable by a fully threaded body
The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
3-way adjustable valving – adjust high and low speed compression and rebound
Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
MRA59-A574 Extended Travel – 575mm extended, 420mm compressed
3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
20 Stage Low Speed Compression – For creepy crawling and cornering
15 Stage Rebound – Control your coils, prevent bucking
50mm CNC Machined High Flow Billet Aluminum Race Piston
3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
Upgraded 3 Stage FKM‐HNBR Sealing System
TSUGAMI™ CNC machined components for precise tolerances
Parker™ Braided High Pressure Hoses
5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
T6 6061 Height Adjustable Spring Seat
Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
60mm Full 6063 aluminum remote reservoir
Lightweight CNC Machined Low Friction floating piston
High Quality O.E.M. Grade Natural Rubber Bushings
Single Piece Lower Leg
EDP Surface Protection
Direct Bolt-On Design
CNC TIG Precision Welded Body End Mounts
Fully Rebuildable Design
SOLD IN PAIRS
Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
Full 2 year limited warranty, no set rebuild time period
Instructions for setting coil seat height
Resi installation instructions
To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
Link to Matching rear shocks

$1,795.00

In Stock

Select Coil Spring Color *

Coil spring color is subject to availability (call or email to check). Choose your preferred color here, and if that is not available, we will contact you with an ETA or other options.

Select Lift Height *

Leave a note during checkout if you have a special request for the lift height, and/or if your front end is a lot heavier than normal (aka 300LBS of added weight). If you have a 4×2 model, add 1″ to the listed lift heights

Confirm Added Front End Weight *

Let us know how much added front weight you’ve put on your vehicle, if any. This will confirm what coils and coil seat height we will use

SKU: 5G4RUNMRACOILOVERS-2-3.5 Categories: 4Runner 5th Gen (2010-2024), Coilovers, Dobinsons, Full Suspension Kits - 5th Gen 4Runner, Shocks + Struts - 5th Gen 4Runner, Suspension Tags: MRA59-A574, sc59-001 Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons MRA Extended Travel 4Runner Coilovers set for Toyota 5th Gen 4Runner 2010-2024, this setup allows you to choose what color, spring rate and lift height you want your Dobinsons MRA set to, so that they can bolt right into your rig. Lift your 4Runner 2″, 2.5″, 3.0″ or 3.5″ and bolt in these Dobinsons MRA Extended Travel 4Runner Coilovers to gain a significant ride quality improvement over your stock suspension, while getting that necessary added ground clearance under the front end of your IFS vehicle. Just don’t forget, the more lift you add, the more other parts that also should be added for geometry correction.

Link to YouTube video: https://youtu.be/na5NvdfxOrM

Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRR Adjustable Shock Absorbers and 4Runner coilovers combine the best in high performance race-bred Monotube Technology, with an all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.

The Dobinsons MRA59-A574 Adjustable Remote Reservoir kit utilizes large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling. One of the best options on the market to day to add coilovers to your 4th Gen 4Runner.

The Dobinsons MRA59-A574 Features:

10 High Speed Compression Adjustments

20 Low Speed Compression Adjustments

15 Rebound adjustments

What this means is that you are able to tune your suspensions to accurately adjust to your current driving conditions. No Tools are needed to adjust the suspensions compression and rebound settings, although the kit does come with a handy tool to reach the adjusters better if needed. The rebound compression on struts is done at the top of the strut, and the rebound adjustment on the shocks is done at the base mount of the shock. The MRA features an easy to adjust knob on the reservoir for high and low speed compression adjustment. Due to the adjustable design there is no longer the need to choose between the firmer and comfort valved shocks, you now have the option to manage your valving on the fly, eliminating the hard choice of weather to buy your suspension based on daily comfort or having suspension heavy duty enough for your hauling needs.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Vehicle Fitment:

2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner

2024 Toyota 4Runner