Your cart is currently empty!
within 48 US States
Dobinsons 0-3″ 3-Way Adjustable MRA Tacoma Coilovers for 2005-2023
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Link to Matching rear shocks – MRA59-A940 Regular Travel or MRA59-A941 Long Travel
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
$1,795.00
In StockDescription
Dobinsons MRA Tacoma Coilovers set for Toyota Tacoma 4×4 models 2005-2023, this setup allows you to choose what color, spring rate and lift height you want your Dobinsons MRA set to, so that they can bolt right into your rig. Lift your Tacoma 0″, 1.0″, 1.5″, 2″, 2.5″ or 3″ and bolt in these Dobinsons MRA Tacoma Coilovers to gain a significant ride quality improvement over your stock suspension, while getting that necessary added ground clearance under the front end of your IFS vehicle. Just don’t forget, the more lift you add, the more other parts that also should be added for geometry correction.
Link to YouTube video: https://youtu.be/na5NvdfxOrM
Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRR Adjustable Shock Absorbers combine the best in high performance race-bred Monotube Technology, with an all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.
The new 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.
The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.
The Dobinsons MRA59-A220 Adjustable Remote Reservoir Lift kit utilizes large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling.
The Dobinsons MRA59-A220 Features:
10 High Speed Compression Adjustments
20 Low Speed Compression Adjustments
15 Rebound adjustments
What this means is that you are able to tune your suspensions to accurately adjust to your current driving conditions. No Tools are needed to adjust the suspensions compression and rebound settings, although the kit does come with a handy tool to reach the adjusters better if needed. The rebound compression on struts is done at the top of the strut, and the rebound adjustment on the shocks is done at the base mount of the shock. The MRA features an easy to adjust knob on the reservoir for high and low speed compression adjustment. Due to the adjustable design there is no longer the need to choose between the firmer and comfort valved shocks, you now have the option to manage your valving on the fly, eliminating the hard choice of weather to buy your suspension based on daily comfort or having suspension heavy duty enough for your hauling needs.
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia. All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
Vehicle Suitability:
2005 Toyota Tacoma 4×4 Coilovers
2006 Toyota Tacoma 4×4 Coilovers
2007 Toyota Tacoma 4×4 Coilovers
2008 Toyota Tacoma 4×4 Coilovers
2009 Toyota Tacoma 4×4 Coilovers
2010 Toyota Tacoma 4×4 Coilovers
2011 Toyota Tacoma 4×4 Coilovers
2012 Toyota Tacoma 4×4 Coilovers
2013 Toyota Tacoma 4×4 Coilovers
2014 Toyota Tacoma 4×4 Coilovers
2015 Toyota Tacoma 4×4 Coilovers
2016 Toyota Tacoma 4×4 Coilovers
2017 Toyota Tacoma 4×4 Coilovers
2018 Toyota Tacoma 4×4 Coilovers
2019 Toyota Tacoma 4×4 Coilovers
2020 Toyota Tacoma 4×4 Coilovers
2021 Toyota Tacoma 4×4 Coilovers
2022 Toyota Tacoma 4×4 Coilovers
2023 Toyota Tacoma 4×4 Coilovers
5 reviews for Dobinsons 0-3″ 3-Way Adjustable MRA Tacoma Coilovers for 2005-2023
You must be logged in to post a review.
You may also like…
-
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks Pair
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
- 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMITM CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
- EDP Surface Protection, Direct Bolt-On Design
- Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
- 14.2″ compressed length, 24.2″ extended length
- Installation Instructions
- Works with factory brake line length and OE bump stop length, no extensions required
- Includes reservoir brackets and hardware
- SOLD IN PAIRS
(16 reviews) -
SPCFREE SHIPPING
within 48 US StatesSPC 25470 | UCA’s for Tacoma 2005-2023 Pair
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Now with updated maintenance-free sealed ball joints
- Installation Instructions
- We offer replacement ball joints as well
(10 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews)
Bryan (verified owner) –
Very good customer service, super friendly.
Kevin (verified owner) –
It’s exactly what I wanted.
Edward (verified owner) –
Just what I needed.
Bradley (verified owner) –
Good quality, really nice.
Andrew (verified owner) –
Good quality, really nice.