Dobinsons 2″ to 3″ Lift Kit Toyota Tacoma 2005-2015 with Blocks or AAL

  • 4×4 Access Cab models come with 1″ front lift from the factory.  Lift heights listed are for Dual cab 4×4 models.  Subtract 1″ for access cab models
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
  • You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
  • For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
  • Select front coils based on front end accessory load and lift height

From $930.00

In Stock
Select Front Coils
Note: Access Cab models come with 1" lift from the factory. Deduct 1" lift from the lifted heights, or add longer/taller struts to regain that 1"
C59-302 - 1.75" Lift stock front end
C59-314 - 2" lift w/50-100LBS
C59-350 - 1.75" with 200LBS, 2" with stock weight (heavy rate)
C59-352 - 2.25" lift with 180-220 lbs, or 2.5" with stock weight (heavy rate)
C59-354 - 2.5" lift with 180-220LBS, or 2" with 280-300LBS (heavy rate)
Select Front Coil Color
Select what color you would prefer the coils to be. If that is not available, we will contact you with an ETA or options
Select Front Struts
Use GS59-221 and the suitable coils for the lift height listed, OR use GS59-220 to add 1" of lift to the listed coil lift height.
Example: C59-314 with GS59-220 will be 3" of lift with stock front end weight.
GS59-221 - Twin Tube - standard coil seat height (0-2.5")
GS59-220 - Twin Tube - extended lengths, adds 1" lift to coil lift height (2.5-3.5")
IMS59-50220 - IMS non-resi monotube long travel for 0-3" lifts
MRA59-A220 - MRA 3-way adjustable w/resi monotube - 0-3.5" lift
Select Struts/Shocks Color
Select your preferred color for the struts and shocks. If that is not available, we will contact you with an ETA or options.
Select Rear Shocks
GS59-940 - Twin Tube Shocks for 0-3" of lift
IMS59-50940 - IMS monotube IFP shocks for 0-3" of lift
MRA59-A940 - MRA 3-way adj w/resi monotube for 0-3" of lift
Use Dobinsons Quick Ride Block/U-bolt Kit for Rear Lift?
If you'd like to use blocks to add lift, leaving your stock leaf springs untouched, select the height you'd like here
Use Wheeler's Offroad Add-A-Leaf Kit to add rear lift?
Some people prefer to use an Add-A-Leaf Kit with their stock springs to gain lift or additional load support instead of the quick ride block kit. Select that here if you'd prefer
Add Front Upper Control Arms (UCA's)?
New UCA's can greatly increase the quality of the wheel alignment, mainly in the caster setting, improving steering and handling. Should be used for 2.5" or more of lift
Add Strut Mounts and Assembly?
Here you can add new strut top mounts with hardware, and also if you want the struts pre-assembled prior to shipping
Assembled Coil Seat Height
If you've chosen to have the struts assembled, select what coil seat height you would like. Standard is 213mm and only the coils do the lifting. Raising adds preload to add more lift, so using a 2" coil with the 1" raised seat height gives 3" of lift, for example
Add a Diff Drop Kit?
Diff drop kit, suitable for 2.5"+ lift heights, reducing CV angles
Add a Front Strut Spacer?
Tacoma's are famous for leaning, adding a 1/4" thick spacer adds 1/2" of lift to that side, used on driver's side. Not needed on IMS or MRA, they have adjustable height bodies
Add Front Sway Bar Relocation?
Front sway bar relocation kit, recommended for 3"+ of lift, lowers and moves the stock sway bar into a better working position after lifting the vehicle
Add Front Bump Stops?
For those who regularly offroad or might hit their stock bump stops, it's worth upgrading to higher quality bump stops that will engage sooner on a lifted vehicle
Add Rear Bump Stops?
These can be used with the Quick Ride or Add-A-Leaf kits to replace the stock bump stops, giving a better controlled bottom-out experience and absorbing the hit much better than stock. This also has options for a u-bolt flip kit with new bump stops
Add High Clearance CV Boots?
Stock CV boots tend to rub against each other on lifted vehicles, causing each bellow to eventually wear through. Dobinsons offers high clearance options to correct that.
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors (requires 17" wheels)

Description

Dobinsons quick ride kit – Dobinsons offer this complete suspension system for the 2005-2015 Toyota Tacoma 4×4 Double Cab, designed to give a great ride front and rear, for vehicles looking for 2.0″ to 3.0″ of lift, with standard load in the rear. The Dobinsons quick ride kit supplies new front struts and coils, new rear shocks with 1-2″ lift blocks and zinc coated u-bolts.  Choose the appropriate coils that suits the amount of weight you carry on the front end.

Dobinsons complete rear leaf packs could always be ordered separately later if you choose to replace the Quick Ride Kit, and to gain more load handling capacity with lift.  Dobinsons offers multiple full leaf pack options with poly bushings, greasable pins, and U-bolts, all of which can be bought separately to compliment your Dobinsons quick ride kit down the line.  If you want to order those now, go to the other page here where you can select a full suspension: https://exitoffroad.com/product/dobinsons-1-5-to-3-0-suspension-kit-for-2005-to-2020-tacoma-4×4-double-cabs/

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world.  We export to over 40 countries worldwide from our Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Our Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Our twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

2005 Toyota Tacoma Lift Kit
2006 Toyota Tacoma Lift Kit
2007 Toyota Tacoma Lift Kit
2008 Toyota Tacoma Lift Kit
2009 Toyota Tacoma Lift Kit
2010 Toyota Tacoma Lift Kit
2011 Toyota Tacoma Lift Kit
2012 Toyota Tacoma Lift Kit
2013 Toyota Tacoma Lift Kit
2014 Toyota Tacoma Lift Kit
2015 Toyota Tacoma Lift Kit
2016 Toyota Tacoma Lift Kit
2017 Toyota Tacoma Lift Kit
2018 Toyota Tacoma Lift Kit
2019 Toyota Tacoma Lift Kit
2020 Toyota Tacoma Lift Kit
2021 Toyota Tacoma Lift Kit
2022 Toyota Tacoma Lift Kit
2023 Toyota Tacoma Lift Kit

You may also like…