Dobinsons MRR kit with red coil springs front and rear
Dobinsons MRR kit teal coils
Dobinsons MRR kit with black coil springs front and rear
Dobinsons MRR Strut
Dobinsons MRR Chart Specs on the dyno MRA kit
Dobinsons MRR component list features what is inside MRA kit
Dobinsons MRR
Dobinsons rear coil springs in teal color
THIS SHIPS FREE
within 48 US States

Dobinsons 3-Way Adjustable MRR Toyota 4Runner Lift Kit | 1996-2002 (2-2.5″)

(7 customer reviews)
  • Suits 3rd Gen 4Runner 1996-2002 4×4 Models
  • The terms MRA and MRR are used interchangeably.  The A stands for Adjustable in the part number or SKU
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Full 2 year limited warranty, no set rebuild time period
  • Includes universal resi mounts and adjuster wrench
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Note: A diff drop kit and aftermarket higher clearance UCA’s should be run with the front struts to prevent CV bind and coil contact
  • Common installation instructions

From $3,150.00

In stock
Select Front Coils
Select the coils that match the weight on the front of your vehicle
C59-276 - 2" lift light to medium load (Teal or Black ONLY)
C59-134 - 2.5" with stock weight, 2" lift with heavy load (110-220LBS) (all 3 colors)
C59-238 - 2.5" lift heavy load (110-220LBS) (all 3 colors)
Front Struts
Add Optional Front Resi Mounts?
These are new vehicle-specific resi mounts for an easier and quicker installation, rather than using the supplied universal resi mounts
Select Rear Coils
C59-131 - 2" lift Light to Medium Load
C59-137V - 2" lift variable rate for light to heavy loads up to 220lbs
C59-297V - 2" lift variable rate for heavy constant loads of 330LBS+ (TEAL ONLY)
C59-303R - 2" lift with 300KG / 660LB Load (Red only)
Rear Shocks
Add Strut Mounts?
Here you can add new strut mounts and hardware so that you don't have to disassemble your old struts
Add Front Strut Assembly?
If you want the front coils, struts and new strut mounts (must be added above) to be assembled prior to shipping, add that here
Add Front Lean Correction Spacer?
Older trucks tend to be lower on the driver side, add this spacer during installation to level the front from left to right
Add a Diff Drop KIt?
A diff drop kit rotates and lowers the front of the differential to reduce the CV angle for reduced wear and also better CV boot angle, so that the bellows don't rub against each other so bad
Add Front UCA's?
New front upper control arms (UCA's) help get the best possible alignment on a lifted vehicle and also set you up with all new parts without worrying about the condition of the old used arms, bushings and ball joints. With Dobinsons MRA front struts, it's required to run new UCA's due to the added down travel the struts provide.
Add Airbags?
If you regularly tow with your vehicle, carry a motorcycle on a hitch mount, or have huge variances between daily weight and loaded trip weight, a set of Firestone helper air springs will be very useful. Inserts inside your rear coil springs to add additional load support, Manually inflate or deflate the air bags to add or remove support or height.
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift
Add Front Bump Stops?
Bump stops play a vital roll in controlling the bottom out of a vehicle, and worn out bump stops just won't do the trick. New bump stops soften the bottom out considerably and add control and comfort to the driving experience.
Add Rear Bump Stops?
Bump stops play a vital roll in controlling the bottom out of a vehicle, and worn out bump stops just won't do the trick. New bump stops soften the bottom out considerably and add control and comfort to the driving experience.
Add New CV Boots?
Given the age of the 4Runner, if you're already replacing the front suspension, you may want to replace all the CV boots at the same time

In stock

Share (0)
Total: 0 Total: 0
SKU: 4RUN3RDGENMRRKIT Categories: , , , , , Tags: , , , Brand:

Description

Dobinsons 3rd Gen 4Runner MRR kit – Dobinsons offer this complete 2.0-2.5″ MRR suspension system for the 1996 to 2002 4Runner models (also known as Hilux Surf) with the gas engine looking to freshen up their suspension as well as add ground clearance.

Dobinsons MRA component list features what is inside

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Built on the back of the race winning Monotube Remote Reservoir (MRR) shock absorbers, Dobinsons new range of MRR Adjustable shock absorbers combine the best in high performance race-bred Monotube technology, with an all new 3-way damping adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR shock absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed aluminum reservoir, revised light-weight floating piston, Carbon Fibre/PTFE/Disulphide composite wear band, improved 3-stage sealing system and the ability to run lower gas pressure with the addition of the reservoir compression adjuster, have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and damping performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro-polished, hard chromed and heat treated shock shaft, revised CNC aluminum high flow race piston, and DOM Seamless tubing body provides the ultimate in performance and off-road durability. The 3-way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable. Enjoy the ride…

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons Toyota 4runner MRR lift coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

1996 Toyota 4Runner Lift Kit
1997 Toyota 4Runner Lift Kit
1998 Toyota 4Runner Lift Kit
1999 Toyota 4Runner Lift Kit
2000 Toyota 4Runner Lift Kit
2001 Toyota 4Runner Lift Kit
2002 Toyota 4Runner Lift Kit

7 reviews for Dobinsons 3-Way Adjustable MRR Toyota 4Runner Lift Kit | 1996-2002 (2-2.5″)

  1. Brian (verified owner) –

    Would definitely buy from this site again.

  2. Robert (verified owner) –

    Very good customer service, super friendly.

  3. Nicholas (verified owner) –

    *****

  4. Brian (verified owner) –

    Value for money, super satisfied.

  5. Timothy (verified owner) –

    Would definitely buy from this site again.

  6. Paul (verified owner) –

    Very good customer service, super friendly.

  7. Travis (verified owner) –

    This is my go-to now for off road parts.

Add a review

You may also like…

  • SPC 25460 | UCA's for Tacoma 98-04 & 4Runner 96-02
    SPC

    SPC 25460 | UCA’s for Toyota Tacoma 98-04 & 4Runner 96-02 Pair **DISCONTINUED**
    • Suits Toyota Tacoma 1998-2004 & 4Runner 1996-2002
    • Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
    • THIS ITEM IS ON CLEARANCE AND CAN’T BE RETURNED
    • Improved clearance to get around the spring bucket
    • Updated maintenance free ball joints design
    • 80° of articulation in its ball joint
    • SPC’s arm gives you maximum droop travel.
    • SPC’s arms have +2° of caster built into them
    • Arm will get you 0° to +4° of caster and ±2° of camber
    • Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
    • Installation Instructions
    (13 reviews)
    $899.96 Read more

Related products

  • Dobinsons 4" lift kit for 80 series
    • Dobinsons 4" lift kit for 80 series
    • Dobinsons Caster Plate Kit for 80 Series
    • Twin Tube SHOCK PIN PIN-1000x1000
    80 Series Land Cruiser (1990-1997)

    Dobinsons 3.5-4.5″ Lift Kit Builder | Toyota Land Cruiser 80 Series 1990-97 (All Options)
    • Suits Land Cruiser 80 Series and Lexus LX450
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • **Kit photo shows with every additional option purchased**
    • Coils are specifically suited to match OE spec and height
    • You’re either at stock weight (vehicle is not modified), or you have added constant weight, such as a bumper, winch, rack, drawers, 2nd fuel tank, etc.  Constant weight is permanently bolted onto the vehicle
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines.  Make selections below
    • Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
    • You must choose what coils, shocks and other components you want to add
    • Bump Stop Requirements – 0-3″ Shocks, nothing needed.  4″ and 6″ shocks require the following bump stop extensions:
      • 4″-5″ front shocks – GS45-912, IMS45-60912 and MRA45-A912 require 1/2″ of bump stop extension with a minimum of 525mm coil length
      • 4″-5″ rear shocks – GS59-687, IMS59-60687 and MRA59-A687 require 2″ bump stop extension with a minimum of 505mm coil length
      • 6″-7″ front shocks – GS59-684, IMS59-60684 and MRA59-A684 require 1.5-2″ bump stop extension with a minimum of 570mm coil length
      • 6″-7″ rear shocks – GS59-685, IMS59-60685 and MRA59-A685 require 3″ bump stop extension with a minimum of 555mm coil length
      • The super long travel IMS59-60689 and IMS59-60681 require custom bump stop placement
    (13 reviews)
    From $1,600.00 Select options
  • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
    4Runner 4th Gen (2003-2009)

    Dobinsons Adjustable Rear Lower Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits Toyota 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), and Lexus GX470, GX460, Prado 120 and 150
    • Adjustable Design: Enables fine-tuning of the rear axle’s pinion angle, crucial for vehicles with suspension lifts.​
    • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
    • Zinc plated, then powder coated black, for the ultimate finish and protection
    • Easy Installation: Designed as a direct replacement for factory arms, facilitating straightforward installation without the need for additional modifications
    • Link to matching upper arms
    (14 reviews)
    $450.00 Add to cart
  • Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit PB59-1101K
    Bushings

    Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
    • Suits Toyota Tacoma 2005-2023
    • For any lift height, or no lift. These are OE replacement bushings.
    • Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
    • Pressing of OE bushings may be necessary during removal and installation
    • 1 Kit covers 1 vehicle
    • Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
    • Greasable bolts are sold in pairs, sold separately
    • OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
    • Tacoma poly bushing kit installation
    • Link to Greasable Bolts, Click here
    (14 reviews)
    $100.00 Add to cart
  • Dobinsons VT coils in teal black or red
    • Dobinsons VT coils in teal black or red
    • Dobinsons C59-613V 3 inch rear coils with IMS59-60687 4-5 inch IMS shocks
    • Dobinsons 3 inch flexi coils front and rear with 4-5 inch IMS shocks
    80 Series Land Cruiser (1990-1997)

    Dobinsons 0-6″ Lift 80 Series Rear Coil Spring Options | Toyota Land Cruiser 1990-1997 – Pair
    • Suits Land Cruiser 80 Series and Lexus LX450 1990-1997
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • To see the coil spring specifications of each part number, make a selection, then click the small square that appears to the right to open up the details of that part number
    • Choose what coil suits your vehicle and needs the best
      • Stock weight = All original bumpers, seats, empty cargo area daily, etc
      • Constant Load = Permanent bolted-on accessories like a rear bumper, drawers, roof rack, tent, etc
    • Linear Rate Coil Springs = They do not end in a V in the part number, they are the same spring rate throughout
    • Variable Rate Coil Springs = They end in a V in the part number, they start with a lighter spring rate that progresses heavier as weight is added or as it is compressed.  Variable and Progressive mean the same thing
    • C59-221V – Stock height, variable rate
    • C59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
    • C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ lift with stock weight
    • C59-169 – 1.75″ lift with up to 220lbs constant load
    • C59-171 – 2″ lift with 750lbs constant load, OR 3″ lift with 440lbs constant load
    • C59-175V – 2.0″ lift with up to 660LBS constant load, or 3.0″ lift with up to 330LBS constant load, variable rate
    • C97-147VT – 2.5″ lift with 440lbs constant load (lifts more with less weight), (variable dual rate long travel)
    • C59-167 – 2.5″ lift with up to 220lbs constant load, 2.0″ lift with 440lbs constant load
    • C59-185 – 3″ lift with up to 220LBS constant load, 2.5″ lift with 500LBS constant load, 2″ lift with 800LBS constant load
    • C59-153 – 3″ lift with 880LBS constant rear load
    • C59-613V – 3″ lift with up to 200 LBS constant load (Flexi coils, variable rate)
    • C97-145VT – 3.5″ lift with 400LBS+ heavy constant load (variable dual rate long travel)
    • C59-615V – 4″ lift with up to 200 LBS constant load (Flexi coils, variable rate)
    • C59-617V 4″ Lift with 200-400LBS constant load (Flexi coils, variable rate)
    • C59-309 – 4″ lift with 110-220lbs constant load
    • C97-485VT – 4.0″ lift with a heavy constant load rear end of 300-400LBS of added weight (variable dual rate long travel)
    • C59-313 – 4″ lift with 400-750lbs constant load
    • C59-317 – 6″ lift with stock weight
    • C59-319 – 6″ lift with 200LBS constant load
    • C59-311 – 6″ lift with 880LBS constant load
    • Sold in Pairs
    • Click HERE to see the FRONT coil options
    • Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
    • All lift heights are based on an OEM average stock height of 21″ rear center of hub up to fender (with flares) when new
    (6 reviews)
    From $300.00 Select options