wa59-547k Dobinsons Adjustable Rear Lower Control Arms for Toyota Land Cruiser 200 Series

Ships FREE !!
within 48 US States

Dobinsons Adjustable Rear Lower Control Arms Pair | LC200 LC300 Sequoia 23+

Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, and 2023+ Toyota Sequoia
Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
Made from HSLA (High Strength Low Alloy) Steel
40mm OD and 6mm wall thickness with support brace
Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
Zinc plated, then E-coated black, for the ultimate finish and protection
Sold as a pair

$445.00

In Stock

SKU: WA59-547K Categories: 200 Series Land Cruiser (2008-2021), 200 Series Land Cruiser ARMORED, Control Arms, Control Arms - 200 Series, Control Arms - Sequoia 3rd Gen, Dobinsons, Lower Control Arms, Performance Upgrades - Sequoia 3rd Gen, Sequoia 3rd Gen (2023-2024+), Suspension Brand: Dobinsons Spring & Suspension

Description

Description

200 Series rear lower control arms. 300 Series rear lower trailing arms. 2023+ Sequoia rear lower trailing arms. These are adjustable rear lower control arms, to be used on any vehicle lifted or not, up to 3″ of lift. This kit comes with both side lower arms and also includes Rubber bushings pressed into the arms, as they are maintenance and noise-free. Rubber bushings allow for greater flex (travel). These adjustable arms will allow you to properly set your rear pinion angle due to adding a lift, while also adding strength over the stock arms. Suitable also for long travel rear suspension setups.

NOTE: The threaded end goes towards the frame end with the thread protector facing downwards.

Instructions for use: Set initial length to the same as factory arms, then check pinion angle, then adjust at 1/2″ increments until your pinion angle is set properly. Adding too much length could lead to driveline vibrations.

Vehicle Fitment:

2008 Toyota Land Cruiser 200 Series
2009 Toyota Land Cruiser 200 Series
2010 Toyota Land Cruiser 200 Series
2011 Toyota Land Cruiser 200 Series
2012 Toyota Land Cruiser 200 Series
2013 Toyota Land Cruiser 200 Series
2014 Toyota Land Cruiser 200 Series
2015 Toyota Land Cruiser 200 Series
2016 Toyota Land Cruiser 200 Series
2017 Toyota Land Cruiser 200 Series
2018 Toyota Land Cruiser 200 Series
2019 Toyota Land Cruiser 200 Series
2020 Toyota Land Cruiser 200 Series
2021 Toyota Land Cruiser 200 Series

2023 Toyota Sequoia

2024 Toyota Sequoia

2021 Toyota Land Cruiser 300 Series

2022 Toyota Land Cruiser 300 Series

2023 Toyota Land Cruiser 300 Series

2024 Toyota Land Cruiser 300 Series

Related products

Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A687 3-Way Adjustable MRA Rear Shocks | 80 Series 4″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 4-5″ of lift, or when used in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 674mm extended, 420mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart
Dobinsons
Dobinsons C59-476 1.75″ Front Coils for Toyota Sequoia 2008-2022 5.7L V8
- Dobinsons C59-476 Front 45mm Lift Coils, sold as a pair – suits Toyota Sequoia 2008 to 2022 5.7L V8 models
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 367mm free height, 19mm wire, 685LBF/in rate
- Sold in Pairs
$405.00 Add to cart
Exceptions
Ships FREE !!
within 48 US States
Dobinsons MRA59-A575 3-Way Adjustable MRA Long Travel Rear Shocks
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 & GX460 without KDSS, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- CANNOT BE USED WITH KDSS
- 3-way adjustable valving – adjust high and low speed compression and rebound
- MRA59-A575 – Specifications. 730mm extended, 443mm compressed
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Can Use with Timbren Rear Bump Stop Kit
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stops extensions or longer bump stops are required!!
- Full 2 year limited warranty, no set rebuild time period
- Now comes with a longer hose and different mounting instructions
$1,280.00 Add to cart
Suspension
Ships FREE !!
within 48 US States
Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks | 80 Series 6″ Lift
- Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
$1,350.00 Add to cart