Your cart is currently empty!
Sale!
On Sale All November!!
Dobinsons WA59-545K Adjustable Rear Upper Control Arms Pair | Land Cruiser 80 Series
- Suits Land Cruiser 80 Series and Lexus LX450
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm (1.57″) OD and 6mm (0.236″) wall thickness
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
Original price was: $345.00.$293.25Current price is: $293.25.
In Stock
EAN: 9332670065647
SKU: WA59-545K
Categories: 80 Series Land Cruiser (1990-1997), Control Arms, Control Arms - 80 Series, Dobinsons, Suspension, Upper Control Arms
Tag: wa59-545k
Brand: Dobinsons Spring & Suspension
Description
Dobinsons WA59-545K Details
Dobinsons WA59-545K are adjustable rear upper control arms, to be used on any vehicle lifted or not, up to 7″ of lift. This Dobinsons WA59-545K kit comes with both side upper arms and also includes Rubber bushings pressed into the arms, as they are maintenance and noise-free. Rubber bushings allow for greater flex (travel). These Dobinsons WA59-545K adjustable arms will allow you to properly set your rear pinion angle due to adding a lift, while also adding strength over the stock arms. Suitable also for long travel rear suspension setups.
NOTE: The threaded end goes towards the frame end.
Instructions for use: Set the initial length to the same as factory arms, then check your pinion angle, then adjust at 1/2″ increments until your pinion angle is set properly. Adding too much length could lead to driveline vibrations. Torque only while the full vehicle weight is on the axles, on the ground.
The stock upper control arms on these vehicles are definitely suitable for the way the vehicle came from the factory, but now that was over 20 years ago and by now the bushings could be shot, the arms could be rusty, and if you’ve lifted your vehicle, your rear pinion angle may be off. Also your rear alignment could also be off and there is no way to adjust the rear end alignment without adding adjustable upper and lower trailing arms. Dobinsons WA59-545K will fix the upper arms and you can also buy the Dobinsons WA59-556K lower trailing arms to correct the lower arm position as well as increase the strength since the wall thickness of the stock arms is just not suitable for heavy offroading or hitting rocks, tree stumps, roots, or other objects while out on the trail. You can’t go wrong with adding this simple upgrade to your 80 series.
Check out this 80 series in South America!!  https://youtu.be/0b4F9gqWwLk
Vehicle Fitment:
1990 Toyota Land Cruiser 80 Series
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450
4 reviews for Dobinsons WA59-545K Adjustable Rear Upper Control Arms Pair | Land Cruiser 80 Series
You must be logged in to post a review.
Related products
-
Sale!80 Series Land Cruiser (1990-1997)On Sale All November!!
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Front IFS Diff Drop Kit | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews) -
Sale!4Runner 5th Gen (2010-2024)On Sale All November!!
Dobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(6 reviews)Original price was: $310.00.$263.50Current price is: $263.50. Select options This product has multiple variants. The options may be chosen on the product page -
Sale!Tacoma 3rd Gen (2016-2023)On Sale All November!!
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews)
Thomas (verified owner) –
Very fast delivery.
Adam (verified owner) –
Great description on the page, easy to understand what I was buying.
Joshua (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Matthew (verified owner) –
*****