Your cart is currently empty!
Dobinsons Front Stock Height Coils for Toyota Sequoia 2001 to 2007 4.7L V8 – Pair
- Stock height replacement Front coils for Toyota Sequoia 2001-2007
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- State of the Art Heat Treatment
- High Intensity Shot Peened
- Formed on Precision Mandrels
- Precise End Configurations
- Sold in Pairs
Original price was: $270.00.$229.50Current price is: $229.50.
**Item is on Backorder****Item is on Backorder**
Email when stock is available
Description
Dobinsons C59-342, Dobinsons offer these coil springs to replace the stock front coils for the 2001 to 2007 Toyota Sequoia models with the 4.7L V8 looking to freshen up their suspension. Sold as a pair.
The Toyota Sequoia is quite a heavy vehicle, and now that they’re quite old, if you need to regain some vital lost ground clearance for adventures offroad, then you should check out the Dobinsons coil spring options so that you can refresh the suspension and get it riding with some nice clearance once again. Dobinsons also makes replacement front struts and rear shocks so that you can upgrade the whole suspension.
Dobinsons C59-342 Front Stock Height Coils
Use with these front strut options: GS59-222, IMS59-50222
Use with these rear shock options: GS59-682, IMS59-60682, MRA59-A682
We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.
All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
Vehicle Fitment:
2001 Toyota Sequoia
2002 Toyota Sequoia
2003 Toyota Sequoia
2004 Toyota Sequoia
2005 Toyota Sequoia
2006 Toyota Sequoia
2007 Toyota Sequoia
5 reviews for Dobinsons Front Stock Height Coils for Toyota Sequoia 2001 to 2007 4.7L V8 – Pair
You must be logged in to post a review.
You may also like…
-
4Runner 3rd Gen (1996-2002)On Sale All November!!
Dobinsons GS59-222 Struts for 4Runner 96-02 Tacoma 98-04 Sequoia 01-07 Tundra 00-06
- Suits 3rd Gen 4Runner, 1st Gen Tacoma, 1st Gen Tundra, 1st Gen Sequoia, and Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 465mm extended, 335mm compressed
- Sold in Pairs
(0 reviews) -
DobinsonsOn Sale All November!!
Dobinsons IMS59-50222 Extended Travel Front 2.2″ IFP Struts Pair | Tacoma 4Runner Tundra Sequoia
- Suits 1996-2002 3rd Gen 4Runner, 1996-2004 1st Gen Tacoma, 2000-2006 Toyota Tundra, 2001-2007 Toyota Sequoia, Toyota Prado 90
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Extended Travel
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Standard coil seat height is 164mm
- Struts only, sold as a pair – the coils are sold separately
- 473mm extended, 335mm compressed lengths
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel and a diff drop kit
- Note: Anyone lifting over 2″ shock install the included droop spacer, as pictured, and run a diff drop kit and UCA’s
(13 reviews)
Steven (verified owner) –
Very fast delivery.
Jason (verified owner) –
Great description on the page, easy to understand what I was buying.
Steven (verified owner) –
Great description on the page, easy to understand what I was buying.
Stephen (verified owner) –
*****
Christopher (verified owner) –
Just what I needed.