Your cart is currently empty!
Dobinsons TB59-1646 Torsion Bar Pair for Toyota IFS 1985-1995
- For 4×4 1st and 2nd Gen 4Runners and Pickups, 1985 to 1995 with IFS suspension
- Also suits Hilux LN107 LN108 RN106 1991-2005
- TB59-1646 measure 1064mm in total length – check before ordering if you aren’t sure
- 26mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
$325.00
In StockDescription
Dobinsons TB59-1646 Torsion bar set is suitable for the following vehicles.
1985 to 1989 Toyota 4Runner 1st Gen
1990 to 1995 Toyota 4Runner 2nd Gen
1988 to 2004 Toyota Hilux IFS – Single cab, dual cab, extra cab
1985 to 1995 Toyota Pickup IFS – Single cab, dual cab, extra cab
TB59-1646 measure 1064mm in total length.
Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.
Dobinsons TB59-1646 torsion bars feature an increased bar diameter,thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Dobinsons TB59-1646 torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
A thick durable powdercoat provides protection against corrosion.
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL
When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.
INCREASED SPRING RATEÂ
Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.
Simple Fitment
Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.
Directionally Preset & Scragged
As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.
Durable Powdercoat Finish
A thick durable powdercoat provides protection against corrosion.
Cold Rolled Splines
Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.
Vehicle Suitability:
1985 Toyota 4Runner torsion bars
1986 Toyota 4Runner torsion bars
1987 Toyota 4Runner torsion bars
1988 Toyota 4Runner torsion bars
1989 Toyota 4Runner torsion bars
1990 Toyota 4Runner torsion bars
1991 Toyota 4Runner torsion bars
1992 Toyota 4Runner torsion bars
1993 Toyota 4Runner torsion bars
1994 Toyota 4Runner torsion bars
1995 Toyota 4Runner torsion bars
1988 Toyota Pickup torsion bars
1989 Toyota Pickup torsion bars
1990 Toyota Pickup torsion bars
1991 Toyota Pickup torsion bars
1992 Toyota Pickup torsion bars
1993 Toyota Pickup torsion bars
1994 Toyota Pickup torsion bars
1995 Toyota Pickup torsion bars
1991 Toyota Hilux torsion bars
1992 Toyota Hilux torsion bars
1993 Toyota Hilux torsion bars
1994 Toyota Hilux torsion bars
1995 Toyota Hilux torsion bars
1996 Toyota Hilux torsion bars
1997 Toyota Hilux torsion bars
1998 Toyota Hilux torsion bars
1999 Toyota Hilux torsion bars
2000 Toyota Hilux torsion bars
2001 Toyota Hilux torsion bars
2002 Toyota Hilux torsion bars
2003 Toyota Hilux torsion bars
2004 Toyota Hilux torsion bars
2005 Toyota Hilux torsion bars
5 reviews for Dobinsons TB59-1646 Torsion Bar Pair for Toyota IFS 1985-1995
You must be logged in to post a review.
You may also like…
-
Old Man Emu (OME) SuspensionOME 303003 Torsion Bar Pair for Toyota 4Runner 1986-1995
- Suits the 1st and 2nd Gen Toyota 4Runner from 1986 to 1995 and Toyota Pickup/Hilux 1988-1995
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Sold as a set
- Specs: 1065mm long, 23.4mm bar thickness
(8 reviews)
Related products
-
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
80 Series Land Cruiser (1990-1997)FREE SHIPPING
within 48 US StatesDobinsons 80 Series Stock Height Restoration Suspension Kit 1990-1997 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(18 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews)
Gregory (verified owner) –
Good quality, really nice.
Jeffrey (verified owner) –
*****
Aaron (verified owner) –
Very good customer service, super friendly.
Adam (verified owner) –
5 Stars!!
Paul (verified owner) –
Would definitely buy from this site again.