Your cart is currently empty!
within 48 US States
Dobinsons 3-Way Adjustable MRA Lift Kit | Mitsubishi Montero NM NP NS NT 2000-2019
- All selections are for the 2000-2019 US Spec V6 Gasoline 5-door Wagon models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Shock Design
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Coil seat should be set at 244mm from the center of the lower bushing to the notch in the coil seat, same as original coil seat height. The coils do the lifting. Fine tuning up or down can be done to tune the height or level the vehicle left to right, if required
- Full 2 year limited warranty, no set rebuild time period
Original price was: $3,105.00.$2,639.25Current price is: $2,639.25.
In StockC43-124 - 1.75" with stock front end
C43-126 - 1.75-2" Lift with 110-220LBS constant load
C43-125 - 1.75-2" Lift with up to 220LBS constant load
Description
Dobinsons Montero lift kit, Exit Offroad offer this complete 1.75″-2″ Dobinsons suspension system for the 2000+ Mitsubishi Montero LWB wagons with V6 Gas Engine (US Spec). This covers the full range sold in the US of this vehicle from 2000 to 2019, covering all the facelift versions of it during those years. The suspension was the same throughout.
Dobinsons Montero lift kit is Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.
Dobinsons Montero lift kit includes Dobinsons MRA struts and shock absorbers and are made from the world’s highest quality external and internal parts sourced worldwide.
Built on the Back of the Race Winning Monotube Remote Reservoir (MRR) Shock Absorbers, Dobinsons new range of MRR Adjustable Shock Absorbers combine the best in high performance race-bred Monotube Technology, with an all new 3-way dampening adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR Shock Absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.
The new MRA Montero Struts have 6063 honed Aluminum reservoir, revised light-weight floating piston, Carbon Fiber / PTFE / Disulphide composite wear band, improved 3 stage sealing system, and the ability to run lower gas pressure with the addition of the reservoir compression adjuster; have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and dampening performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.
The Micro Polished, Hard Chromed and Heat Treated shock shaft, revised CNC aluminum high flow race piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability. The 3 Way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable.
The Dobinsons MRA43-A783 Adjustable Remote Reservoir Lift kit utilizes large bores, combined with remote oil reservoirs, provide the perfect housing for an enormous oil capacity and surface area to resist shock fade and maintain vehicle handling.
The Dobinsons MRA Montero Struts MRA43-A783 Features:
10 High Speed Compression Adjustments
20 Low Speed Compression Adjustments
15 Rebound adjustments
What this means is that you are able to tune your suspensions to accurately adjust to your current driving conditions. No Tools are needed to adjust the suspensions compression and rebound settings, although the kit does come with a handy tool to reach the adjusters better if needed. The rebound compression on struts is done at the top of the strut, and the rebound adjustment on the shocks is done at the base mount of the shock. The MRA features an easy to adjust knob on the reservoir for high and low speed compression adjustment. Due to the adjustable design there is no longer the need to choose between the firmer and comfort valved shocks, you now have the option to manage your valving on the fly, eliminating the hard choice of weather to buy your suspension based on daily comfort or having suspension heavy duty enough for your hauling needs.
Vehicle Fitment:
2000 Mitsubishi Montero
2001 Mitsubishi Montero
2002 Mitsubishi Montero
2003 Mitsubishi Montero
2004 Mitsubishi Montero
2005 Mitsubishi Montero
2006 Mitsubishi Montero
2007 Mitsubishi Montero
2008 Mitsubishi Montero
2009 Mitsubishi Montero
2010 Mitsubishi Montero
2011 Mitsubishi Montero
2012 Mitsubishi Montero
2013 Mitsubishi Montero
2014 Mitsubishi Montero
2015 Mitsubishi Montero
2016 Mitsubishi Montero
2017 Mitsubishi Montero
2018 Mitsubishi Montero
2019 Mitsubishi Montero
7 reviews for Dobinsons 3-Way Adjustable MRA Lift Kit | Mitsubishi Montero NM NP NS NT 2000-2019
You must be logged in to post a review.
James (verified owner) –
Very good customer service, super friendly.
Jacob (verified owner) –
Would definitely buy from this site again.
Brian (verified owner) –
Good quality, really nice.
Jose (verified owner) –
Very fast delivery.
Christopher (verified owner) –
*****
Jeremy (verified owner) –
Very good customer service, super friendly.
Richard (verified owner) –
It’s exactly what I wanted.