Your cart is currently empty!
Dobinsons Pair of Strut Top Plates for Toyota Tundra 22+ Sequoia 23+
- Made specifically for the 4×4 Toyota Tundra from 2022-2024 and Toyota Sequoia from 2023+ and 2022+ Land Cruiser 300 Series
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
- Assembly Instructions
$120.00
In Stock
SKU: SC59-014
Categories: 300 Series Land Cruiser (2021+), Dobinsons, Land Cruiser, Sequoia 3rd Gen (2023-2024+), Struts + Shocks - Tundra 2022+, Tundra 3rd Gen (2022-2024)
Brand: Dobinsons Spring & Suspension
Description
Made specifically for the 4×4 Toyota Tundra from 2022-2023+ and Toyota Sequoia from 2023 onwards.
Includes all new hardware, washers, and bushings for a completely new installation.
Dobinsons have a range of coil Strut Top Caps available for most popular 4×4 models. These can be used to replace the original worn strut top caps or can be fitted to coil struts with coil springs allowing a complete strut assembly that is a simple install. These come with a built-in top bushing (same as OE equipment) and new studs installed with nuts supplied.
For a faster installation process, purchase your new Dobinsons Struts, Coils, and Strut Caps all new and have them assembled prior to removing your original strut assembly from the vehicle. By using a new Strut Cap, you won’t have to dismantle the original strut and coil assembly to re-use the original Strut Cap, saving time.
Related products
-
4Runner 2nd Gen (1990-1995)
Dobinsons C59-159V Rear 2″ Coils for Toyota 4Runner 2nd Gen
- Suits 2nd Gen Toyota 4Runner 1990-1995
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Dobinsons C59-159V – 2″ rear lift – variable rate coils
- 2″ lift is 2″ over OE stock height. Keep this in mind, as these old trucks will be sagged below stock height
$270.00 Add to cart -
Full Suspension Kits - Tundra 2nd GenShips FREE !!
within 48 US StatesDobinsons Tundra 2.0″-3.0″ MRA Suspension Kit for 2007-2021 4×4 V8
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal. Struts and shocks are black
- Front MRA Coilovers are assembled at the standard coil seat height
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period, fully rebuildable shocks
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
From $4,420.00 Select options -
Rear Drawers
Dobinsons DW59-022K Wing Side Panel Kit for 80 Series LX450
- Suits Toyota Land Cruiser 80 Series 1990-1997 or Lexus LX450
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
$260.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60683 Front IMS Shocks | Land Cruiser 80 Series (0-3″ lift)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 625mm extended, 375mm compressed
$650.00 Add to cart
