Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons Rear Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-019FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
- Installation Instructions
$940.00
In Stock
SKU: HBS59-019FKK
Categories: 80 Series Land Cruiser (1990-1997), Brake Lines & Bump Stops - 80 Series, Bump Stops, Dobinsons, Exceptions, Performance Upgrades - 80 Series, Suspension
Tags: air bumps, hbs, hydro, hydrobump, hydrobumps
Brand: Dobinsons Spring & Suspension
Description
Dobinsons Rear Adjustable Hydro Bumps Kit (hydraulic bump stops kit) for Toyota Land Cruiser 80 Series and Lexus LX450 1990-1997. Will only suit vehicle with coil spring rear ends, no airbags, and cannot work in conjunction with aftermarket airbag kits that fit inside the coil springs. This hydraulic bump stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection. The Dobinsons Rear Adjustable Hydro Bumps Stop kit also retains the original external bump stop on the frame, and the kit comes with spacer blocks to lower the original bump stop down to meet the same bottom-out level as the new hydraulic bumps. You can replace the original frame-mounted bump stop with an aftermarket one if you’d like. This hydro bumps stop kit replaces the factory inner bump stop that holds the coil springs in place and also provides additional bottom-out protection, in addition to setting the bump stop gap for long travel shocks, increased tire clearance, or whatever else you may need to restrict or free up the amount of bump stop gap that your Land Cruiser has. The adjustable hydro bumps can easily spin on their threaded body to raise up or down in the mounts provided so that you can tune in the height quite easily. You’ll possibly have to take the coil out of the way to get in there and accurately set and adjust the height.
Dobinsons rich racing history has produced the line of IMS and MRA shock absorbers and this monotube technology has now been passed into the new hydro bump stop line. The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each hydraulic product to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Matching front hydro bumps kit for the 80 Series Land Cruiser:
Dobinsons Front Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
To see all bump stops that Exit Offroad offer, check it out here:Â Bump Stops Category
Vehicle Fitment:
1990 Toyota Land Cruiser 80 Series
1991 Toyota Land Cruiser 80 Series
1992 Toyota Land Cruiser 80 Series
1993 Toyota Land Cruiser 80 Series
1994 Toyota Land Cruiser 80 Series
1995 Toyota Land Cruiser 80 Series
1996 Toyota Land Cruiser 80 Series
1997 Toyota Land Cruiser 80 Series
1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450
7 reviews for Dobinsons Rear Adjustable Hydro Bump Stop Kit | 80 Series Land Cruiser
You must be logged in to post a review.
Related products
-
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
(12 reviews) -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews)
Timothy (verified owner) –
Would definitely buy from this site again.
Joseph (verified owner) –
Great description on the page, easy to understand what I was buying.
Stephen (verified owner) –
This is my go-to now for off road parts.
Kenneth (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Christopher (verified owner) –
Great description on the page, easy to understand what I was buying.
Ryan (verified owner) –
5 Stars!!
Patrick (verified owner) –
Just what I needed.