Your cart is currently empty!
within 48 US States
Icon 2.5″ VS Coilovers Pair | 00-06 Tundra 01-07 Sequoia
- Suits 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia 4WD
- Sold as a Pair
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 0-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with internal reservoirs for consistent performance
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Aftermarket UCA’s should be run with any lift height of 2″ or more
- DOWNLOAD INSTALLATION GUIDE
$1,459.95
In StockDescription
ICON 2024 Toyota Tacoma Coilovers from Icon Vehicle Dynamics V.S. 2.5 Series internal reservoir front coilover shocks are an incredible upgrade for the front end of the 2000-2006 Tundra and 2001-2007 Sequoia. These adjustable coilovers allow up to 0-3.0” of lift height adjustability, allowing the use of larger, more aggressive wheel and tire combinations. ICON’s Vehicle-specific shock length and valving, their large 2.5” shock body with increased piston surface area over stock components, and their pairing with an ICON front differential drop (4WD only), yield the maximum travel possible along with superior ride quality and suspension performance both on- and off-road. When paired with ICON 2.0 or 2.5 Aluminum Series rear shock absorbers vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota Tundra or Sequoia.
FEATURES & BENEFITS
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 0-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with internal reservoirs for consistent performance
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
TECH INFO:
- Factory Wheels & Tires Fitment: Yes
- Recommended Aftermarket Wheels: 8.5″ wide wheel with 5″ backspace
- Recommended Aftermarket Tires: 33″ x 11.50″ (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
2001 Toyota Tundra Coilovers
2002 Toyota Tundra Coilovers
2003 Toyota Tundra Coilovers
2004 Toyota Tundra Coilovers
2005 Toyota Tundra Coilovers
2006 Toyota Tundra Coilover
2002 Toyota Sequoia Coilovers
2003 Toyota Sequoia Coilovers
2004 Toyota Sequoia Coilovers
2005 Toyota Sequoia Coilovers
2006 Toyota Sequoia Coilovers
2007 Toyota Sequoia Coilovers
Additional information
Weight | 40 lbs |
---|---|
Dimensions | 27 × 13 × 7 in |
6 reviews for Icon 2.5″ VS Coilovers Pair | 00-06 Tundra 01-07 Sequoia
You must be logged in to post a review.
You may also like…
-
SPCFREE SHIPPING
within 48 US StatesSPC 25485 | UCA’s for 2001-07 Sequoia & 1999-06 Tundra Pair
- Suits 2001-07 Toyota Sequoia & 1999-06 Toyota Tundra
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +1° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- Installation Instructions
Rated 5.00 out of 5(11 reviews)
Related products
-
Dobinsons
Dobinsons Front 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
Rated 5.00 out of 5(4 reviews) -
Dobinsons
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
Rated 5.00 out of 5(14 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
Rated 5.00 out of 5(13 reviews) -
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
Rated 5.00 out of 5(15 reviews)
Eric (verified owner) –
It’s exactly what I wanted.
Jeremy (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Aaron (verified owner) –
*****
Jonathan (verified owner) –
*****
Edward (verified owner) –
It’s exactly what I wanted.
Steven (verified owner) –
Just what I needed.