Icon Billet Rear Lower Trailing Arms Pair | 22+ Tundra 23+ Sequoia 24+ Tacoma

Related products

• 

  • 
  • 
  • 

  Exceptions

  FREE SHIPPING
  within 48 US States

  Dobinsons Tubular UCA Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
  • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Has more clearance around the ball joint than factory UCA’s for better tire clearance
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height, as factory alignment correction will be enhanced with these
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Curved washers face outwards away from bushings during installation, per the product video
  • Product Video
  • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
  • Replacement Ball Joints can be ordered here

  Rated 5.00 out of 5

  (8 reviews)

  $875.00 Add to cart
• 

  Dobinsons

  Dobinsons Greasable Bolt Pair | SP59-060

  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Kit includes 2 greasable bolts, as shown in the photo
  • Order 2 kits if you want to replace fixed and shackle end bolts
  • Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+.  See full vehicle list below
  • 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end

  Rated 5.00 out of 5

  (12 reviews)

  $80.00 Add to cart
• 

  • 
  • 
  • 

  80 Series Land Cruiser (1990-1997)

  FREE SHIPPING
  within 48 US States

  Dobinsons 80 Series Stock Height Restoration Suspension Kit 1990-1997 (inc all shock options)

  • Suits Land Cruiser 80 Series and Lexus LX450
  • Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to match OE spec and height
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs.  Add on additional parts if desired

  Rated 5.00 out of 5

  (18 reviews)

  From $1,220.00 Select options
• 

  • 
  • 

  Dobinsons

  Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s

  • Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
  • Keeps CV angles at a good working angle
  • Suitable for lifts over 2.0″.  There’s really no benefit to adding them if there’s less lift than 2.0″
  • Includes all necessary hardware, including machined spacers and nuts/bolts
  • Includes 2 different lengths of the long bolts as some vehicles need them longer than others
  • Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
  • Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
  • Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
  • Installation Instructions

  Rated 5.00 out of 5

  (17 reviews)

  $65.00 Add to cart