Your cart is currently empty!
OME 303003 Torsion Bar Pair for Toyota 4Runner 1986-1995
- Suits the 1st and 2nd Gen Toyota 4Runner from 1986 to 1995 and Toyota Pickup/Hilux 1988-1995
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Sold as a set
- Specs: 1065mm long, 23.4mm bar thickness
$237.95
In StockDescription
Torsion Bars
Old Man Emu OME 303003 Torsion Bars dramatically improve your vehicle’s ride and handling, both on road and off.
These suit the 1st and 2nd Gen Toyota 4Runner from 1986 to 1995 with Torsion bar front suspension.
OME 303003 are designed and set for optimum ride performance, while maintaining maximum wheel travel which is crucial during off road driving. Old Man Emu Torsion Bars work best when Old Man Emu coil or leaf springs are fitted to the rear of your vehicle, with bars and springs then carefully matched to our premium range of 4WD shock absorbers. Together, they’ll transform your vehicle’s suspension performance.
Torsion Bar Features
– OME 303003 are Manufactured from premium grade spring steel with a resilient powder coat to protect against corrosion
– Precision drawn, dropped forged ends for optimal strength and integrity
– Pressure rolled splines for precise fitment and increased spline durability
– Hardened and tempered to exact specifications for improved performance
– Preset and hardened to prevent sagging and increase life cycle
Vehicle Fitment:
1985 Toyota 4Runner torsion bars
1986 Toyota 4Runner torsion bars
1987 Toyota 4Runner torsion bars
1988 Toyota 4Runner torsion bars
1989 Toyota 4Runner torsion bars
1990 Toyota 4Runner torsion bars
1991 Toyota 4Runner torsion bars
1992 Toyota 4Runner torsion bars
1993 Toyota 4Runner torsion bars
1994 Toyota 4Runner torsion bars
1995 Toyota 4Runner torsion bars
1988 Toyota Pickup torsion bars
1989 Toyota Pickup torsion bars
1990 Toyota Pickup torsion bars
1991 Toyota Pickup torsion bars
1992 Toyota Pickup torsion bars
1993 Toyota Pickup torsion bars
1994 Toyota Pickup torsion bars
1995 Toyota Pickup torsion bars
1991 Toyota Hilux torsion bars
1992 Toyota Hilux torsion bars
1993 Toyota Hilux torsion bars
1994 Toyota Hilux torsion bars
1995 Toyota Hilux torsion bars
1996 Toyota Hilux torsion bars
1997 Toyota Hilux torsion bars
1998 Toyota Hilux torsion bars
1999 Toyota Hilux torsion bars
2000 Toyota Hilux torsion bars
2001 Toyota Hilux torsion bars
2002 Toyota Hilux torsion bars
2003 Toyota Hilux torsion bars
2004 Toyota Hilux torsion bars
2005 Toyota Hilux torsion bars
8 reviews for OME 303003 Torsion Bar Pair for Toyota 4Runner 1986-1995
You must be logged in to post a review.
You may also like…
-
SuspensionDobinsons TB59-1646 Torsion Bar Pair for Toyota IFS 1985-1995
- For 4×4 1st and 2nd Gen 4Runners and Pickups, 1985 to 1995 with IFS suspension
- Also suits Hilux LN107 LN108 RN106 1991-2005
- TB59-1646 measure 1064mm in total length – check before ordering if you aren’t sure
- 26mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(5 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-088 Front Shocks Pair | Toyota 4Runner Pickup 1985 to 1995
- Suits Toyota 4Runner 1st and 2nd Gen, 1985 to 1995 models with torsion bar suspension, and Toyota Hilux/Pickup 1998 to 2004 models with IFS torsion bar suspension
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 367mm extended, 237mm compressed
(9 reviews)
Related products
-
Dobinsons
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 500/510mm free height, 16mm wire, 179LBF/in rate
- Sold in Pairs
(3 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose what coil suits your vehicle and needs the best
- Any part number with a V in it means it’s a variable rate/progressive rate spring
- C59-221V – Stock height, variable rate
- c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
- C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
- c59-169 – 1.75″ with up to 220lbs weight
- c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
- C59-175V – 2.0″ lift with up to 660LBS, or 3.0″ lift with up to 330LBS
- C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
- c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
- c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
- C59-153 – 3″ lift with 880LBS constant rear load
- C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
- C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
- C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
- C59-617V 4″ Lift with 200-400LBS Load (Flexi coils, variable rate)
- C59-309 – 4″ lift with 110-220lbs weight
- C97-485VT – 4.0″ with a heavy load rear end of 300-400LBS of added weight (variable dual rate long travel)
- C59-313 – 4″ lift with 400-750lbs weight
- C59-317 – 6″ lift with stock weight
- C59-319 – 6″ lift with 200LBS constant weight
- C59-311 – 6″ lift with 880LBS constant weight
- Sold in Pairs
- Click HERE to see the FRONT coil options
- Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
(6 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 3.5-4″ Lift Kit Builder | Land Cruiser 80 Series 1990-97 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- **Kit photo shows with every additional option purchased**
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines. Make selections below
- Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
- You must choose what coils, shocks and other components you want to add
(13 reviews)
Timothy (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Aaron (verified owner) –
5 Stars!!
James (verified owner) –
This is my go-to now for off road parts.
Paul (verified owner) –
Just what I needed.
Christopher (verified owner) –
This is my go-to now for off road parts.
Daniel (verified owner) –
It’s exactly what I wanted.
Jeremy (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Mark (verified owner) –
*****