Your cart is currently empty!
Sale!
RCI is on Sale For Spring!!
RCI Rear FJ Cruiser Diff Skid Plate
- Suits Toyota FJ Cruiser – all years
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
Original price was: $335.00.$301.50Current price is: $301.50.
In Stock
SKU: FJC-DIFFSKID
Categories: Accessories, Armor, FJ Cruiser Early (2006-2009), FJ Cruiser Late (2010-2014), RCI Off Road, Skid Plates, Sliders Skids + Steps - FJ Cruiser Early, Sliders Skids + Steps - FJ Cruiser Late
Brand: RCI Offroad
Description
Underbody damage is costly. Protect your investment with an RCI FJ Cruiser Diff skid, the ultimate defense for all on and off-road hazards.
Built of laser cut 3/16” steel, this plate is custom fit to protect the rear differential of all Toyota FJ Cruisers with premium quality, fit and finish.
FJ Cruiser Diff Skid KEY FEATURES
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- This FJ Cruiser Diff Skid Plate is a Direct bolt on addition to existing factory attachment points, no drilling required
MADE IN USA
RCI Metalworks LLC (DBA RCI Off Road) is a Colorado based company owned and operated out of Loveland, Colorado. We specialize in the manufacturing of aftermarket truck and SUV accessories. We are passionate about what we do and the products we build, which is why each of our products are carefully engineered and thoroughly tested to ensure an innovative solution that will exceed the needs of our customers.
At RCI we proudly engineer and manufacture all of our products in house at our Loveland, CO Location. This differentiates us within the industry and allows us to offer the absolute best products with extremely competitive prices.
Our in-house manufacturing processes include:
- CNC Fiber Laser Cutting of Sheet Metal
- CNC Fiber Laser Tube Cutting
- CNC Press Brake Forming
- Robotic welding
- Mig and Tig Welding of Steel and Aluminum
- CNC Tube Bending and Notching
- Fully automated powder coating line with 4 stage wash system and integrated primer coating
- In-house R&D and CAD design utilizing 3D scanning and FEA
- Warehousing, Packaging, and Shipping
- And much more!
Vehicle Fitment:
2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser
2017 Toyota FJ Cruiser
Additional information
| Weight | 22 lbs |
|---|---|
| Dimensions | 27 × 14 × 6 in |
Related products
-
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
$405.00 Add to cart -
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
$345.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesETA is Summer 2024Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Also sold without ball joints
$795.00 Add to cart -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart
