Your cart is currently empty!
RCI On Sale Now !!!
RCI Rock Sliders | 03-09 Toyota 4Runner + Lexus GX470
- Fits 2003-2009 4runners without Xreas, unless you’ve removed those lines. Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
- Made to order from your selections below
- Made in USA
$819.99
In StockDescription
GX470 SLIDERS DETAILS
The rocker panel is the most vulnerable area on your vehicle when off-road, as well as one of the most costly to repair. Protect your investment with a pair of RCI heavy duty rock sliders.
RCI GX470 sliders and 4th Gen 4Runner sliders utilize a full frame support mounting plate which serves both to protect your frame from damage, as well as provides an extremely rigid attachment for the sliders by using multiple bolt locations all across the frame. These will help protect the truck both off-road as well as in the parking lot, and are still very functional as a step if needed.
KEY FEATURES
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer tubing is now standard for uncompromised strength
- Heavy Duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for for use as a step
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware and installation instructions provided
- Fits 2003-2009 4runners without Xreas (Xreas model available by special request, call for details)
- Includes our signature low profile rear kick-out standard
- *Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- *Does not fit KDSS models of GX470
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470
5 reviews for RCI Rock Sliders | 03-09 Toyota 4Runner + Lexus GX470
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
- Rear Long Travel Coils Installation Guide
(15 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 4th Gen (2003-2009)
Dobinsons Strut Top Plates Pair | Toyota and Lexus Trucks & SUV’s
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2024, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(10 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
4Runner 4th Gen (2003-2009)
Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
(17 reviews)
Charles (verified owner) –
5 Stars!!
Aaron (verified owner) –
Very good customer service, super friendly.
Brian (verified owner) –
5 Stars!!
Gregory (verified owner) –
Very fast delivery.
Michael (verified owner) –
Value for money, super satisfied.