Your cart is currently empty!
within 48 US States
Rusty’s Forged Adjustable Sway Bar Quick Disconnects | TJ LJ XJ MJ ZJ
- Suits the following Jeep models
- 1997-2006 TJ Wrangler
- 2003-2006 LJ Unlimited
- 1984-2001 XJ Cherokee
- 1986-1993 MJ Comanche
- 1993-1998 ZJ Grand Cherokee
- 1997-2006 TJ Wrangler
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
- Built in Rainbow City, Alabama, USA
$167.00
In StockDescription
Rusty’s has offered various forms of sway bar quick-disconnects over the years, but each design produced by other companies had some limitation of one form or another, so Rusty’s decided to design and build our own! These disconnects offer ease of use, tremendous adjustability, unbeatable vehicle coverage, and major strength all in one package!
Rusty’s Adjustable Sway Bar Disconnects are available to fit all popular Jeep models, including JK, TJ, and YJ Wranglers, LJ Unlimiteds, XJ Cherokees, WJ and ZJ Grand Cherokees, and even CJs! The adjustable design accommodates lift kits between 2″ and 8.5″ of lift, and they can be adjusted without removing them from the vehicle. The forged steel construction is exceptionally strong and has a similar design to our bulletproof Forged Flex suspension joints. Stainless steel and Grade 8 hardware round out these exceptional links. When hooked up and properly adjusted, they allow the suspension to function just as it normally would, but by pulling a couple of pins, you free up suspension flex for exceptional off-road traction. These disconnects work with all of Rusty’s suspension systems as well as most other brands.
All necessary brackets and hardware are included. Priced per pair. Fits front sway bars only.
KEY FEATURES:
- Fits: TJ, LJ, XJ, MJ, and ZJ all years!
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
These Disconnects fit the following vehicles:
• 1997-2006 TJ Wrangler
• 2003-2006 LJ Unlimited
• 1984-2001 XJ Cherokee
• 1986-1993 MJ Comanche
• 1993-1998 ZJ Grand Cherokee
Vehicle Suitability:
1997 Jeep Wrangler TJ
1998 Jeep Wrangler TJ
1999 Jeep Wrangler TJ
2000 Jeep Wrangler TJ
2001 Jeep Wrangler TJ
2002 Jeep Wrangler TJ
2003 Jeep Wrangler TJ
2004 Jeep Wrangler TJ
2005 Jeep Wrangler TJ
2006 Jeep Wrangler TJ
2003 Jeep Wrangler LJ
2004 Jeep Wrangler LJ
2005 Jeep Wrangler LJ
2006 Jeep Wrangler LJ
1984 Jeep Cherokee XJ
1985 Jeep Cherokee XJ
1986 Jeep Cherokee XJ
1987 Jeep Cherokee XJ
1988 Jeep Cherokee XJ
1989 Jeep Cherokee XJ
1990 Jeep Cherokee XJ
1991 Jeep Cherokee XJ
1992 Jeep Cherokee XJ
1993 Jeep Cherokee XJ
1994 Jeep Cherokee XJ
1995 Jeep Cherokee XJ
1996 Jeep Cherokee XJ
1997 Jeep Cherokee XJ
1998 Jeep Cherokee XJ
1999 Jeep Cherokee XJ
2000 Jeep Cherokee XJ
2001 Jeep Cherokee XJ
1986 Jeep Comanche MJ
1987 Jeep Comanche MJ
1988 Jeep Comanche MJ
1989 Jeep Comanche MJ
1990 Jeep Comanche MJ
1991 Jeep Comanche MJ
1992 Jeep Comanche MJ
1993 Jeep Comanche MJ
1993 Jeep Grand Cherokee ZJ
1994 Jeep Grand Cherokee ZJ
1995 Jeep Grand Cherokee ZJ
1996 Jeep Grand Cherokee ZJ
1997 Jeep Grand Cherokee ZJ
1998 Jeep Grand Cherokee ZJ
Rusty’s Off-Road is a leader in the 4X4 industry with our innovative line of Jeep specific products. Our in-house manufacturing and R & D keeps our products on the cutting edge. With our in house manufacturing we are able to control cost and sell retail at wholesale cost without sacrificing quality.
We have over 45 years of hands on experience in the off-road vehicle industry giving us the knowledge that few of our competitors have. Rusty’s has grown from a small business serving a regional market to a worldwide company. We have grown from a small 2 bay shop to an ever growing 65,000 square foot building. Yes, we too started off with torches and big hammers but today it’s high-tech measuring devises, precision machining centers, lasers, robots and a group of very dedicated employees to produce what we think are the very best in off road products.
We proudly back our products as ‘Trail Tested Tough.’ Each of our parts go through extensive prototype testing on the trails, allowing us to improve and strengthen our designs so we release only the highest quality products. Moab, Rubicon, Tellico, Wind Rock, and Jeep Jamboree events around the country have been regular stomping grounds for the Rusty’s Off Road Testing Crew over the years. Many parts have been run and tested in some of the most grueling off road races and rallies and with this abuse and testing you can be assured you will be getting the very best part built.
7 reviews for Rusty’s Forged Adjustable Sway Bar Quick Disconnects | TJ LJ XJ MJ ZJ
You must be logged in to post a review.
You may also like…
-
DobinsonsPrice Increase Coming May 1st
Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place. Can be used with or without a lift.
Rated 5.00 out of 5(7 reviews)
Related products
-
DobinsonsPrice Increase Coming May 1st
Dobinsons C59-300 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- This is a comparable option to OME 2884 coils, which are 390mm free height, 16mm wire, 590LBF/in spring rate
Rated 5.00 out of 5(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tacoma 3rd Gen (2016-2023)Price Increase Coming May 1st
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- All lift heights are based on the baseline of 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. A 3″ front lift is 23″ for example. Some Tacoma’s come with 1″ lift from the factory
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
Rated 5.00 out of 5(13 reviews) -
DobinsonsPrice Increase Coming May 1st
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
Rated 5.00 out of 5(14 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
DobinsonsPrice Increase Coming May 1st
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
Rated 5.00 out of 5(15 reviews)
Jonathan (verified owner) –
5 Stars!!
Scott (verified owner) –
This is my go-to now for off road parts.
Justin (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Kenneth (verified owner) –
*****
Adam (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Eric (verified owner) –
Very fast delivery.
Chad (verified owner) –
Good quality, really nice.