Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
SPC 25480 | UCA’s Pair for 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2024 Toyota 4Runner, 2006-2017 Toyota FJ Cruiser, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460
- Improved clearance to get around the spring bucket
- 80° of articulation in its ball joint
- SPC’s arm gives you maximum droop travel.
- SPC’s arms have +2° of caster built into them
- Arm will get you 0° to +4° of caster and ±2° of camber
- Maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming
- New maintenance-free sealed ball joint design
- Installation Instructions
- We offer replacement ball joints as well
$695.95
In Stock
EAN: 82642254805
SKU: 25480
Categories: 4Runner 4th Gen (2003-2009), 4Runner 5th Gen (2010-2024), Control Arms - FJ Cruiser Early, Control Arms - FJ Cruiser Late, Control Arms - Lexus GX460, Control Arms - Lexus GX470, Early FJ Cruiser (2006-2009), Exceptions, GX460 (2010-2023), GX470 (2002-2009), Late FJ Cruiser (2010-2016), SPC, Suspension, UCAs and Control Arms - 4th Gen 4Runner, UCAs and Control Arms - 5th Gen 4Runner, Upper Control Arms
Brand: SPC
Description
SPC 25480 Upper Control Arm Set. Suits 2003-2024 Toyota 4Runner, 2006-2017 Toyota FJ Cruiser, 2003-2009 Lexus GX470, 2010-2023 Lexus GX460. SPC has been at the forefront of designing and building rugged, adjustable front upper control arms for the demands of lifted vehicles. Trucks and SUVs run out of factory alignment adjustment when you install lift kits. With our patented design our upper control arms provide additional camber and caster change. Tough enough for off-road and racing applications, SPC arms are the industry standard.
Many Toyota trucks and SUVs run out of factory adjustment when you install lift kits. With our patented design this upper control arm provides an additional ±2° of camber and 0° to +4° of caster change. Built with a maintenance-free ball joint and SpecRide™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. The hybrid tubular and forged steel design is tough enough to race on or off-road. These remove and replace arms are available in pairs for lifted and off-road applications.
SPC 25480 – Adjustable Upper Control Arms
Lexus 4WD: 2003 & Up GX470 and GX460
Toyota RWD/4WD: 2007 – 14 FJ Cruiser;
2003-2024 4Runner
Designed, engineered, tested, and assembled in Colorado; SPC Performance’s adjustable upper control arms are loaded with the features you need. Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires. Equipped with greaseable ball joints and xAxis™ sealed flex joints in bonded rubber sleeves, this arm will both correct alignment angles and restore factory ride quality. SPC’s forged steel design provides the strength and durability needed for the most demanding environments. (Sold in pairs.)
- Get the most suspension travel available: SPC’s arms have improved clearance to get around the spring bucket and 80° of articulation in its ball joint. Now equipped with free pivoting xAxis joints, SPC’s arm gives you maximum droop travel. More travel than any other ball joint or mono ball equipped arm on the market.
- Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +2° of caster built into them. Using its patented ball joint design, the arm will get you 0° to +4° of caster and ±2° of camber. This adjustability allows you to put your alignment angles back to specification.
- Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.
Do you need replacement cams for the lower control arm? Check out SPC p/n 25440
to replace corroded or ‘frozen’ cam bolt assemblies.
Adjustment range: Camber ±2.0°
Caster 0.0° to +4.0°
Installation time: .8 hr/side
Patent No. US 7,513,514 B1
Vehicle Fitment:
2003 Toyota 4Runner SPC
2004 Toyota 4Runner SPC
2005 Toyota 4Runner SPC
2006 Toyota 4Runner SPC
2007 Toyota 4Runner SPC
2008 Toyota 4Runner SPC
2009 Toyota 4Runner SPC
2010 Toyota 4Runner SPC
2011 Toyota 4Runner SPC
2012 Toyota 4Runner SPC
2013 Toyota 4Runner SPC
2014 Toyota 4Runner SPC
2015 Toyota 4Runner SPC
2016 Toyota 4Runner SPC
2017 Toyota 4Runner SPC
2018 Toyota 4Runner SPC
2019 Toyota 4Runner SPC
2020 Toyota 4Runner SPC
2021 Toyota 4Runner SPC
2022 Toyota 4Runner SPC
2023 Toyota 4Runner SPC
2024 Toyota 4Runner SPC
2003 Lexus GX470 SPC
2004 Lexus GX470 SPC
2005 Lexus GX470 SPC
2006 Lexus GX470 SPC
2007 Lexus GX470 SPC
2008 Lexus GX470 SPC
2009 Lexus GX470 SPC
2010 Lexus GX460 SPC
2011 Lexus GX460 SPC
2012 Lexus GX460 SPC
2013 Lexus GX460 SPC
2014 Lexus GX460 SPC
2015 Lexus GX460 SPC
2016 Lexus GX460 SPC
2017 Lexus GX460 SPC
2018 Lexus GX460 SPC
2019 Lexus GX460 SPC
2020 Lexus GX460 SPC
2021 Lexus GX460 SPC
2022 Lexus GX460 SPC
2023 Lexus GX460 SPC
2006 Toyota FJ Cruiser SPC
2007 Toyota FJ Cruiser SPC
2008 Toyota FJ Cruiser SPC
2009 Toyota FJ Cruiser SPC
2010 Toyota FJ Cruiser SPC
2011 Toyota FJ Cruiser SPC
2012 Toyota FJ Cruiser SPC
2013 Toyota FJ Cruiser SPC
2014 Toyota FJ Cruiser SPC
2015 Toyota FJ Cruiser SPC
2016 Toyota FJ Cruiser SPC
11 reviews for SPC 25480 | UCA’s Pair for 4Runner FJ Cruiser GX470 GX460
You must be logged in to post a review.
You may also like…
-
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews) -
Sale!15% off Year End SaleUpper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews)
Related products
-
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
(12 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesETA is late DecemberDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews)
Paul (verified owner) –
I received it really fast.
Nicholas (verified owner) –
This is my go-to now for off road parts.
Edward (verified owner) –
Very good customer service, super friendly.
Patrick (verified owner) –
Great description on the page, easy to understand what I was buying.
Thomas (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
William (verified owner) –
Great description on the page, easy to understand what I was buying.
James (verified owner) –
Very fast delivery.
Jeremy (verified owner) –
I received it really fast.
Jacob (verified owner) –
Very good customer service, super friendly.
James (verified owner) –
Would definitely buy from this site again.
Benjamin (verified owner) –
This is my go-to now for off road parts.