“Powerbrake D-Line HP Rotor and Pad Kit | FJ Cruiser Front” has been added to your cart. Continue shopping
“MAXTRAX MKII Pink Recovery Boards” has been added to your cart. Continue shopping
You may be interested in…
-
Performance Upgrades - FJ Cruiser EarlyFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | FJ Cruiser 10-16 Rear
- Suits Toyota FJ Cruiser 2010-2016 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(6 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front FJ Cruiser Big Brake Kit Stage 1
Toyota FJ Cruiser Big Brake Kit (all years) Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Manufactured, finished and packaged 100% in South Africa
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also for 06-09 Models and 10-16 Models
(3 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | Tacoma Hilux Fortuner 2005-23
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
- Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
(9 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | FJ Cruiser 06-09 Rear
- Suits Toyota FJ Cruiser 2006-2009 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(9 reviews) -
Recovery
MAXTRAX MKII Mounting Pins (17mm bolts)
- Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
- 17mm bolt length, see attached photo for description
- 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
- Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
- M10 stainless bolt has a provision for a small padlock
- Please Note: Antiseize recommended on install
- SOLD AS A SET OF FOUR
(4 reviews)
Cart totals
| Subtotal | $2,134.94 |
|---|---|
| Shipping |
Shipping to FL. |
| Route Shipping Protection | $53.37 |
| Tax | $164.26 |
| Total | $2,407.57 |
