Sale!

Dobinsons MRA kit with black coil springs front and rear

Dobinsons MRA kit with red coil springs front and rear

Tacoma front MRR MRA coilovers installed

Dobinsons MRA low and high speed compression adjusters on remote resi

FREE SHIPPING
within 48 US States

On Sale All November!!

Dobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2003-2009 (0-3.5″)

Name: Dobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2003-2009 (0-3.5")
SKU: 4THGEN4RUNMRAKIT
Price: 2295.00 USD
Availability: InStock
Rating: 5.00 (10 reviews)

Rated 5.00 out of 5 based on 10 customer ratings

(10 customer reviews)

Complete suspension kit for 4×4 Off Road Use, fine tuned to match the 4th Gen 4Runner 2003-2009
If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Base Kit Price Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Standard Coil Springs
For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
Coils are specifically suited to the additional accessory load (weight) on the vehicle
3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
20 Stage Low Speed Compression – For creepy crawling and cornering
15 Stage Rebound – Control your coils, prevent bucking
50mm CNC Machined High Flow Billet Aluminum Race Piston
3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
Upgraded 3 Stage FKM‐HNBR Sealing System
TSUGAMI™ CNC machined components for precise tolerances
Parker™ Braided High Pressure Hoses
5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
T6 6061 Height Adjustable Spring Seat
Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
60mm Full 6063 aluminum remote reservoir
Lightweight CNC Machined Low Friction floating piston
High Quality O.E.M. Grade Natural Rubber Bushings
Single Piece Lower Leg
EDP Surface Protection
Direct Bolt-On Design
CNC TIG Precision Welded Body End Mounts
Fully Rebuildable Design
Full 2 year limited warranty, no set rebuild time period
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
You can go from a standard suspension to full long travel with all the options listed here
Common installation instructions

Original price was: $2,700.00.Current price is: $2,295.00.

In Stock

Select Front Coils for V6 Engine

Select here if you have a V6
Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-238 - Stock front end, low height 3/4" to 1"
C59-296 - Stock front end, 1.5" lift
C59-300 - Stock front end, 1.75-2.0" lift
C59-302 - Stock - 2.5" | with 110-150lbs - 2"
C59-314 - Stock - 3" | with 110-220lbs - 2.5"
C59-350 - With 220-300lbs - 1.5" | Heavy rate coils
C59-352 - With 220-300lbs - 2" | Heavy rate coils
C59-354 - With 220-300lbs - 2.5" | Heavy rate coils

Select Front Coils for V8 Engine

Select here if you have a V8
Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-238 - Stock front end, low height 1/4-1/2"
C59-296 - Stock front end, 1.0" lift
C59-300 - Stock front end, 1.5" lift
C59-302 - Stock - 2.0" | with 110-150lbs - 1.5"
C59-314 - Stock - 2.5" | with 110-220lbs - 2.0"
C59-350 - With 220-300lbs - 1.5" | Heavy rate coils
C59-352 - With 110-220lbs - 2.0" | Heavy rate coils
C59-354 - With 220-300lbs - 2.0" | Heavy rate coils

Select Front Struts

MRA59-A220 are Extended Travel Adjustable Height Monotube Struts with 3-way valving adjustment

Select Rear Coils

Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4"
C59-323 - Stock height up to 1/2" lift
C59-599 - 3/4-1" with stock weight
C59-505 - 1.25-1.5" with stock weight
C59-325 - 1.75-2" with stock weight
C59-327 - 2" with 200-400lbs weight
C59-329 - 2" with 500-800lbs weight
C59-331 - 2" with 800-1200lbs weight (teal only)
C59-675V - 2.5" long travel, stock weight
C59-677V - 3" long travel with stock weight, 2.5" with 200-400lbs weight
C59-701V - 3" long travel, 300-600lbs weight
C59-749V - 3" long travel, 800-1000LBS super extra heavy
C59-849V - 3" long travel, 1000LBS+ constant rear load (TEAL ONLY)

Need to Convert from Rear Airbags to Coils?

Dobinsons airbag to coil conversion kit is what you'll need. This kit adds 1/2" to listed coil height

Select Rear Shocks

Only those people looking to do a full long travel rear can order the ***575 shocks. They will cause issues if you don’t have the correct replacement brake lines, bump stops, and sway bar links in place.
MRA59-A701 - MRA 3-way adjustable w/resi monotube (0-3" lift)
MRA59-A575 - MRA 3-way adj w/resi monotube for LONG TRAVEL lifts only, not for KDSS

Add Front Brake Lines?

Replacement brake lines aren't required for the front of this vehicle, however adding stainless braided brake lines front and rear will increase the pedal feel and braking performance

Add Extended Rear Brake Lines?

If you've chosen the **575 Long Travel rear shocks, new extended rear brake lines are required with these shocks

Add New UCA's?

New Upper Control Arms (UCA's) can greatly increase the quality of the wheel alignment, mainly in the caster setting, improving steering and handling. Should be used for 2.5″ or more of lift. Select one, the click on small box to the right for more full specs

Add a Diff Drop Kit?

Diff drop kit is for 3″+ lift to reduce the CV angles

Add New Strut Mounts?

If you want to add new front strut top mounts so you don't have to separate the old coilovers and reuse the mounts, add that here

Add Front Strut Assembly?

If you want the front coils, struts and new strut mounts (must be added above) to be assembled prior to shipping, add that here

Assembled Coil Seat Height

If you've chosen to have the struts assembled, select what coil seat height you would like. Standard is 213mm and only the coils do the lifting. Raised adds 1" of lift when set to 226mm, so using a 2" coil with the raised seat height gives 3" of lift, for example

Add Front or Rear Lean Correction Spacer?

If your vehicle already leans to one side, add this to the low side during assembly. KDSS vehicles should use a rear spacer at a minimum if lifting 2" or more. A 1/4" front spacer adds 1/2" of lift. Rear is 15mm (1/2") of lift.

Add Rear Panhard Rod?

For lifts of 3" or more, a heavy duty adjustable panhard rod will allow you to re-center your axle. This can also be used with any height, but for those needing a stronger panhard rod than stock

Add New Front High-Clearance CV Boots?

If your vehicle is older, and you plan to lift 3" or more, new Dobinsons high-clearance CV boots are a great option

Add Front Swaybar Relocation Bracket Kit?

Moves the stock front sway bar mount forward for better clearance to the coilover, ideal when lifting 2" or more

Add Extended Front Swaybar links? (only non-KDSS vehicles)

Factory sway bar links are prone to bending and breaking and can even puncture your CV boots. All-Pro's heavy-duty Toyota front sway bar links replace the weak stock links using top quality Teflon lined 3/4" Heim Joints and hefty .156 wall DOM tubing.

Add Extended Rear Sway Bar Links? (only non-KDSS vehicles)

For 2" or more, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this

Add New Front Bump Stops?

If you regularly offroad, extending your bump stops helps reduce the harsh impact when the front bottoms out. Click the small box to the right of the product for more information.

Add Rear Bump Stops?

For those who regularly offroad and stand a chance to bottom out more often, or for those running the 575 long travel shocks, new bump stops should be added

Add Rear Bump Stop Extensions?

If you're running the *575 Long Travel rear shocks, proper extended bump stops, or bump stop extensions are required at a minimum so the shocks don't bottom out

Add New Rear Trailing Arms?

For heavy offroading, or for true long travel, new upper and lower adjustable trailing arms help correct pinion angle, give better articulation, and are much much stronger than stock

Add Airbags?

If you regularly tow with your vehicle, carry a motorcycle on a hitch mount, or have huge variances between daily weight and loaded trip weight, a set of Firestone helper air springs will be very useful. Inserts inside your rear coil springs to add additional load support, Manually inflate or deflate the air bags to add or remove support or height.
Firestone 4135 is for 0-1.5" of lift
Firestone 4108 is for 2-3" of lift

Upgrade Front Brakes?

This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors (requires 17" wheels)
Sport versions have 13.3" diameter calipers, regular are 12.55". You must verify that size before ordering

Upgrade Rear Brakes?

SKU: 4THGEN4RUNMRAKIT Categories: 4Runner 4th Gen (2003-2009), Dobinsons, Exceptions, Full Suspension Kits, Full Suspension Kits - 4th Gen 4runner, Suspension Tag: mra Brand: Dobinsons Spring & Suspension

Description
Reviews (10)

Description

Dobinsons offers this complete MRA suspension system for the 2003 to 2009 Toyota 4Runner 4th Generation 4.0L V6 and 4.7L V8, with various lift height and coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. Contact us directly if you have questions before ordering.

With this page, you can build your own Dobinsons Toyota 4runner MRA lift kit for your Toyota 4Runner 4th Gen model, from 2003 to 2009. There are many ways to outfit your Toyota 4Runner, all of which could possibly add weight and change the dynamics of your vehicle and the way that it drives. Choosing the correct suspension is paramount while shopping around, so be sure to check out all the options we here at Exit Offroad list for the 4th Gen 4Runner. We have conveniently put all of the options together on this one page. All you’ll need to do is select the appropriate parts to choose what you would like to add to your vehicle.

Check out installation instructions for non-standard parts here: https://exitoffroad.com/instructions/

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Built on the back of the race winning Monotube Remote Reservoir (MRR) shock absorbers, Dobinsons new range of MRR Adjustable shock absorbers combine the best in high performance race-bred Monotube technology, with an all new 3-way damping adjustment system to turn your 4×4 into the ultimate off-road machine. Each component of the MRR shock absorber has been refined and improved to offer a higher level of ride quality, vehicle control and shock absorber performance.

The new 6063 honed aluminum reservoir, revised light-weight floating piston, Carbon Fibre/PTFE/Disulphide composite wear band, improved 3-stage sealing system and the ability to run lower gas pressure with the addition of the reservoir compression adjuster, have combined to provide massive reductions in shock absorber friction, resulting in an improved vehicle ride and damping performance. The revised sealing design now provides a 3 stage FKM-HNBR shaft seal system that, when combined with the reduced operating frictions, provides a vastly increased service life with reduced wear.

The Micro-polished, hard chromed and heat treated shock shaft, revised CNC aluminum high flow race piston, and DOM Seamless tubing body provides the ultimate in performance and off-road durability. The 3-way adjustment design reduces the main piston working load, distributing heat more evenly between the main piston and the reservoir piston for reduced operating temperatures, and allows quick and easy damping changes for the ultimate in shock tunability in varying terrain and vehicle loads, to keep you controlled and comfortable. Enjoy the ride…

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons Toyota 4runner MRA lift coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

***2.5″ or more of lift, new UCA’s are recommended***

NOTE: For a lift of 3″ in the rear, new extended brake lines and minimum of 2″ bump stop extensions are required to be used with our long travel rear shocks. At full extension, the stock brake lines could get damaged, and with stock bump stops in place, the shocks will bottom out before the bump stop fully engages, which will quickly destroy the shocks.

Vehicle Suitability:

2003 Toyota 4Runner Lift Kit
2004 Toyota 4Runner Lift Kit
2005 Toyota 4Runner Lift Kit
2006 Toyota 4Runner Lift Kit
2007 Toyota 4Runner Lift Kit
2008 Toyota 4Runner Lift Kit
2009 Toyota 4Runner Lift Kit

10 reviews for Dobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2003-2009 (0-3.5″)

Rated 5 out of 5

Jacob (verified owner) – December 29, 2022

It’s exactly what I wanted.
Rated 5 out of 5

Kenneth (verified owner) – January 16, 2023

It’s exactly what I wanted.
Rated 5 out of 5

Scott (verified owner) – March 4, 2023

Very fast delivery.
Rated 5 out of 5

Nathan (verified owner) – September 6, 2023

Just what I needed.
Rated 5 out of 5

Edward (verified owner) – October 3, 2023

Very fast delivery.
Rated 5 out of 5

Jeremy (verified owner) – November 10, 2023

Very fast delivery.
Rated 5 out of 5

Steven (verified owner) – November 19, 2023

Value for money, super satisfied.
Rated 5 out of 5

Aaron (verified owner) – February 20, 2024

I received it really fast.
Rated 5 out of 5

Adam (verified owner) – August 13, 2024

This is my go-to now for off road parts.
Rated 5 out of 5

Bryan (verified owner) – September 3, 2024

Good quality, really nice.