Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu Amigo + Passport – 1145mm (45.08″)

Name: Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu Amigo + Passport – 1145mm (45.08″)
SKU: TB21-1550
Availability: InStock
Rating: 5.00 (4 reviews)

Rated 5.00 out of 5 based on 4 customer ratings

(4 customer reviews)

You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
TB21-1550 are 1145mm (45.08″), 30mm bar thickness
Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first
Increased spring rate to improve handling and lift front end
Powder coated black for a long lasting finish
Replaces OE torsion bars without modification
Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride

$355.00

In Stock

EAN: 9332670050612 SKU: TB21-1550 Categories: Amigo, Dobinsons, Passport (2/1999-2002), Suspension, Torsion Bars Brand: Dobinsons Spring & Suspension

Description
Reviews (4)

Description

Dobinsons Heavy Duty Torsion Bar set for Isuzu Amigo TB21-1550. Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first

You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.

Here are the options and total length of each.

TB21-1547 – 1000mm (39.37″)

TB21-1549 – 1220mm (48.03″)

TB21-1550 – 1145mm (45.08″)

Dobinsons Spring & Suspension’s range of heavy duty 4×4 torsion bars are manufactured from high quality micro alloy steel with a thicker bar diameter than the original vehicle torsion bars to improve performance when accessories are fitted. When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

The torsion bars fitted to the vehicle will not withstand the additional weight placed on the vehicle and will be prone to sag and will offer poor handling and offroad performance. Dobinsons heavy duty 4×4 torsion bars feature increased spring rate (thicker bar diameter) to better handle the additional weight and provide far improved handling, ride height and offroad performance.

Dobinsons Isuzu Amigo torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Dobinsons TB21-1550 Isuzu Amigo torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit. These Honda Passport torsion bars may also suit your vehicle, be sure to measure your stock bar length before ordering.

A thick durable powdercoat provides protection against corrosion.

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their Isuzu Trooper torsion bars directionally preset and scragged to prevent sagging and breakage.

Dobinsons TB21-1550 heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

DOBINSONS RANGE OF HEAVY DUTY 4X4 TORSION BARS ARE MANUFACTURED FROM HIGH QUALITY MICRO ALLOY STEEL

When vehicles are fitted with additional accessories such as steel bullbars, winches, dual battery kits and other frontal accessories the weight placed on the torsion bars can be dramatically increased.

INCREASED SPRING RATE

Dobinsons torsion bars feature an increased bar diameter, thicker than the original vehicle torsion bars. Dobinsons uprated torsion bars provided a far superior ride that will greatly reduce bottoming of the suspension and will improve the vehicles handling whilst also offering far greater reliability at increased ride heights.

Simple Fitment

Dobinsons heavy duty torsion bars have precision end fitment and are marked both left and right hand side, and also importantly front and rear to ensure correct simple fitment the first time. Fitting torsion bars on the incorrect side or back to front will damage the torsion bars as they are preset and scragged in the required direction.

Directionally Preset & Scragged

As torsion bars have load applied in a particular direction during compression travel, Dobinsons have their torsion bars directionally preset and scragged to prevent sagging and breakage.

Durable Powdercoat Finish

A thick durable powdercoat provides protection against corrosion.

Cold Rolled Splines

Dobinsons torsion bars feature cold rolled splines to increase strength, reliability and ensure a perfect fit.

Potential Vehicle Fitment:

1999 Honda Passport
2000 Honda Passport
2001 Honda Passport
2002 Honda Passport
1995 Isuzu Amigo
1996 Isuzu Amigo
1997 Isuzu Amigo
1998 Isuzu Amigo
1999 Isuzu Amigo
2000 Isuzu Amigo
2001 Isuzu Amigo
2002 Isuzu Amigo

4 reviews for Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu Amigo + Passport – 1145mm (45.08″)

Rated 5 out of 5

Richard (verified owner) – December 2, 2020

It’s exactly what I wanted.
Rated 5 out of 5

Gregory (verified owner) – January 1, 2021

Spoke with Mike, he got me headed in the right direction for what I need.
Rated 5 out of 5

Bradley (verified owner) – November 16, 2021

Good quality, really nice.
Rated 5 out of 5

Jacob (verified owner) – November 19, 2023

I received it really fast.