Your cart is currently empty!
Sale!
On Sale All November!!
RCI Rear FJ Cruiser Diff Skid Plate
- Suits Toyota FJ Cruiser – all years
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
Original price was: $324.99.$276.00Current price is: $276.00.
In Stock
SKU: FJC-DIFFSKID
Categories: Accessories, Armor, Early FJ Cruiser (2006-2009), Late FJ Cruiser (2010-2016), RCI Off Road, Skid Plates, Sliders Skids + Steps - FJ Cruiser Early, Sliders Skids + Steps - FJ Cruiser Late
Brand: RCI Offroad
Description
Underbody damage is costly. Protect your investment with an RCI FJ Cruiser Diff skid, the ultimate defense for all on and off-road hazards.
Built of laser cut 3/16” steel, this plate is custom fit to protect the rear differential of all Toyota FJ Cruisers with premium quality, fit and finish.
FJ Cruiser Diff Skid KEY FEATURES
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- This FJ Cruiser Diff Skid Plate is a Direct bolt on addition to existing factory attachment points, no drilling required
MADE IN USA
RCI Metalworks LLC (DBA RCI Off Road) is a Colorado based company owned and operated out of Loveland, Colorado. We specialize in the manufacturing of aftermarket truck and SUV accessories. We are passionate about what we do and the products we build, which is why each of our products are carefully engineered and thoroughly tested to ensure an innovative solution that will exceed the needs of our customers.
At RCI we proudly engineer and manufacture all of our products in house at our Loveland, CO Location. This differentiates us within the industry and allows us to offer the absolute best products with extremely competitive prices.
Our in-house manufacturing processes include:
- CNC Fiber Laser Cutting of Sheet Metal
- CNC Fiber Laser Tube Cutting
- CNC Press Brake Forming
- Robotic welding
- Mig and Tig Welding of Steel and Aluminum
- CNC Tube Bending and Notching
- Fully automated powder coating line with 4 stage wash system and integrated primer coating
- In-house R&D and CAD design utilizing 3D scanning and FEA
- Warehousing, Packaging, and Shipping
- And much more!
Vehicle Fitment:
2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser
2017 Toyota FJ Cruiser
Additional information
| Weight | 22 lbs |
|---|---|
| Dimensions | 27 × 14 × 6 in |
4 reviews for RCI Rear FJ Cruiser Diff Skid Plate
You must be logged in to post a review.
Related products
-
Sale!DobinsonsOn Sale All November!!
Dobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these: https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
Sale!SuspensionOn Sale All November!!
Dobinsons GS59-220 Pair of Extended Travel Front Struts | Toyota + Lexus
- Suits 2005 to 2023 Toyota Tacoma 4×4, Toyota FJ Cruiser from 2006 to 2009, Toyota 4Runner 2003 to 2009 4th Gen, and Lexus GX470
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Adds 1″ of lift due to the raised coil seat height
- Dobinsons GS59-220 Specification: 558mm extended, 435mm compressed, 50mm body, 226mm coil seat height
- Available in Yellow or Black
(6 reviews)Original price was: $350.00.$297.50Current price is: $297.50. Select options This product has multiple variants. The options may be chosen on the product page -
Sale!DobinsonsOn Sale All November!!
Dobinsons C59-701V Rear UHD Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 17mm wire diameter, 210-245LBF/IN variable spring Rate
(21 reviews)Original price was: $305.00.$259.25Current price is: $259.25. Select options This product has multiple variants. The options may be chosen on the product page
Scott (verified owner) –
I received it really fast.
Bryan (verified owner) –
I received it really fast.
Jonathan (verified owner) –
This is my go-to now for off road parts.
Paul (verified owner) –
5 Stars!!