Your cart is currently empty!
within 48 US States
All Pro 5th Gen 4Runner IFS Skid Plate – Bare Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00
In StockDescription
2010-2024 4Runner IFS Skid Plates
Whether you are climbing over rocks, fording a river, or evading potholes, your factory skid plate is inadequate. The sensitive components on the front end of your vehicle are also among the least shielded. All-Pro Off-Road’s 2010+ 4Runner IFS Skid Plates provide much needed protection for your front differential and steering components.
If you need protection but want to keep the weight down for the sake of fuel economy, suspension wear and off-road performance, you need our 1/4-inch thick 5052 Aluminum IFS Skid Plate. With the optimal balance between strength and weight, this aluminum plate will hold up against significant abuse and, at only 22 lbs, it’s half the weight of similar steel undercarriage protection.
Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate.
AP-308099 | 2010+ 4Runner Steel IFS Skid Plate – Steel Bare |
AP-308100 | 2010+ 4Runner Steel IFS Skid Plate – Steel Black Powder Coat |
AP-308101 | 2010+ 4Runner Steel IFS Skid Plate – Aluminum Bare |
AP-308102 | 2010+ 4Runner Steel IFS Skid Plate – Aluminum Black Powder Coat |
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
NOTE:Â
Bare steel versions require painting before installation.
Skidplate not currently compatible with diff drop kit.
Additional information
Weight | 31 lbs |
---|
You may also like…
-
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Aluminum Black
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Black Powder Coated
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Black Coated Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coat
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Bare Aluminum
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Bare
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart
Related products
-
Dobinsons
Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
$405.00 Add to cart -
Lexus
Dobinsons C59-314 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 405/405mm free height, 17mm wire thickness, 586LBF/IN rate
$270.00 Select options -
Dobinsons
Dobinsons C59-323 Stock Height Rear Coil Springs for GX460 GX470 FJ 4Runner 03-23
- Suits Lexus GX470, GX460 and 2003-2024 Toyota 4Runner and FJ Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 375mm, 17mm wire, 220LB Rate
- Note: Whilst these were made as stock replacement springs, some customers report a little lift over OE stock height. They should sit between 22-22.5″ from the center of the hub up to the fender. Variations in vehicle models, weight, and how the vehicle is loaded can affect the final ride height
- If you regularly tow or carry heavy loads, consider adding the Timbren SES Kit for added support
$270.00 Select options -
Accessories
Dobinsons 4Runner Drawers | Toyota 5th Gen 4Runner 2010-2024
- One of the strongest and best looking drawer systems out there for the 5th Gen 4Runners!!
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built-in Heavy-Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Comprehensive outer wing trim kit to provide a factory fit (optional)
- Installation of drawers REQUIRES drilling and bolting through floor.
- Vehicle Specific Instructions – 4Runner 5th Gen
- Any existing sliding deck must be removed prior to drawer installation.
- Aluminum Edging Protection, Heavy duty lockable latches.
- Sliding portion is not changeable from one side to the other.
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
From $1,465.00 Select options