Your cart is currently empty!
Dobinsons Front Coil Spring Options for V8 Toyota 4th Gen 4Runner 2003-2009 – Pair
- THIS IS FOR V8 ENGINE 4X4 MODELS ONLY – V6 models use a different set of specs
- Choose what coil suits your vehicle and needs the best
- Sold as a Pair
- All specs are listed for 4×4 models. 2WD models lift about 1″ more due to less weight
- Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
- C59-238 – Stock front end, low height 1/4-1/2″
- C59-296 – Stock front end, 1.0″ lift
- C59-300 – Stock front end, 1.5″ lift
- C59-302 – Stock Weight – 2.0″ | with 110-150lbs – 1.5″
- C59-314 – Stock Weight – 2.5″ | with 110-220lbs – 2.0″
- C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
- C59-352 – With 110-220lbs – 2.0″ | Heavy rate coils
- C59-354 – 2.5″ with 110-150lbs | with 220-300lbs – 2.0″ | Heavy rate coils
Original price was: $270.00.$229.50Current price is: $229.50.
In StockDescription
Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it.
Stock weight = all stock front end | 110 LBS is usually a slim line bumper and winch with synthetic line | 220 LBS is usually a full width steel bumper with a winch and synthetic or steel line | 300+ LBS is usually a full with steel bumper, winch, dual batteries, and skid plates
C59-238 – Stock front end, low height 1/4-1/2″
C59-296 – Stock front end, 1.0″ lift
C59-300 – Stock front end, 1.5″ lift
C59-302 – Stock – 2.0″ | with 110-150lbs – 1.5″
C59-314 – Stock – 2.5″ | with 110-220lbs – 2.0″
C59-350 – With 220-300lbs – 1.5″ | Heavy rate coils
C59-352 – With 110-220lbs – 2.0″ | Heavy rate coils
C59-354 – With 220-300lbs – 2.0″ | Heavy rate coils
Dobinsons Spring & Suspension™ proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from their state of the art manufacturing facility in Central Queensland, Australia.
We proudly boast one of the worlds largest range of coil springs, including raised height and heavy duty 4WD springs, lowered performance passenger car springs, O.E. replacement springs and heavy duty springs for commercial vehicles.
All our coil springs are load tested and scragged 100% to eliminate subsequent spring sag, and ensure they meet and maintain the required specifications. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.
Our design engineers utilize the latest coil spring design programs to ensure each spring meets or exceeds the design requirements, to achieve maximum working life. These state-of-the-art design programs are crucial when designing variable/progressive rate springs, ensuring laden and unladen spring rates are correct, providing the best possible ride comfort and handling.
NOTE: Dobinsons coils are aqua in color, unless otherwise specified here.
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
12 reviews for Dobinsons Front Coil Spring Options for V8 Toyota 4th Gen 4Runner 2003-2009 – Pair
You must be logged in to post a review.
You may also like…
-
ExceptionsFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA59-A220 3-Way Adjustable MRA Front Struts Extended Travel Pair
- Suits 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470, Toyota Prado 120, and 2005-2015 Toyota Hilux Vigo
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Resi brackets bolt in between the stock front sway bar mount
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
(20 reviews) -
ExceptionsOn Sale All November!!
Dobinsons IMS59-50220 Extended Travel Front 2.2″ IFP Struts Pair | Toyota & Lexus
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
(15 reviews)
Adam (verified owner) –
Great description on the page, easy to understand what I was buying.
Nathan (verified owner) –
*****
Joshua (verified owner) –
5 Stars!!
Richard (verified owner) –
It’s exactly what I wanted.
Aaron (verified owner) –
Would definitely buy from this site again.
Jeffrey (verified owner) –
Good quality, really nice.
Jose (verified owner) –
*****
Jason (verified owner) –
5 Stars!!
Benjamin (verified owner) –
Great description on the page, easy to understand what I was buying.
Paul (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Michael (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Ryan (verified owner) –
Very good customer service, super friendly.