“Rusty’s Offset Tie Rod Steering System | TJ Wrangler XJ Cherokee” has been added to your cart. Continue shopping
You may be interested in…
-
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons IMS59-50220 Extended Travel Front 2.2″ IFP Struts Pair | Toyota & Lexus
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
(15 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons IMS59-60713 2.6″ IFP Rear Shocks Pair | Toyota Sequoia 2008-2022
- Suits 2008-2022 Toyota Sequoia without rear air suspension, for lift heights between 0″ and 2.5″
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 343mm compressed length, 489mm extended length (these are extended travel over the GS59-713 shocks)
- Note: the video shows an IMS front strut that takes a coil. This listing is for the rear IMS shock, no adjustability.
(14 reviews) -
Skid Plates
Rear Shock Mount Skids | 2010-2024 4Runner FJ Cruiser GX460
- Includes one pair of rear shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on all 2010-2024 4Runner, FJ Cruiser and Lexus GX460 models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made in USA
(4 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Lower Control Arms w/Forged Flex Ends – High Clearance | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed on the axle end, and high flex joints on the frame end
- Massive 2 inch DOM Tubing
- Greasable flex joints on the frame end
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- High Clearance feature
- Black powder coated
- Sold as a pair, left and right
- Included studs to hold the brake lines
- Made in the USA
(14 reviews) -
Sequoia 2nd Gen (2008-2022)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A713 3-Way Adjustable Rear Shocks Pair | Sequoia 2008-2022
- Suits Toyota Sequoia 2008-2022
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(13 reviews) -
Dobinsons
Dobinsons Toyota Tacoma 2005-2023 Rear Poly Leaf Spring Bush Kit
- Suits Toyota Tacoma 2005-2023
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs, top and bottom of the shackle and the fixed end
- Greasable bolts are sold in pairs, sold separately
- OE bushings have to be pressed out of the shackle, INCLUDING the outer metal sleeve of the bushing, to fit these
- Tacoma poly bushing kit installation
- Link to Greasable Bolts, Click here
(14 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A660 3-Way Adjustable Front Struts Pair
- Suits 2024+ Toyota Land Cruiser 250 Series and Lexus GX550
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Installation Instructions
- Coil seat for MRA59-A660 should be set at 237mm (9.3″) from the strut bushing eye
- Photos for illustration purposes only
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons WA59-545K Adjustable Rear Upper Control Arms Pair | Land Cruiser 80 Series 1990-1997
- Suits Land Cruiser 80 Series and Lexus LX450
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel, 40mm (1.57″) OD and 6mm (0.236″) wall thickness
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
(4 reviews) -
Steering -JK WranglerFREE SHIPPING
within 48 US StatesRusty’s HD Aluminum Tie Rod Assembly | JK Wrangler
- Fits: 2007-2018 Jeep Wrangler JK Models
- Massive 1.825″ 7075 Solid Aluminum Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- Machined hexed ends for easy adjustment
- Zinc Plated tie rod ends for protection and long life
- HD jam nuts
- Serrated Lock Washers
- The strongest JK Tie Rod you can buy
- Built in Rainbow City, Alabama, USA
- Also made in a steel DOM version
(4 reviews) -
Dobinsons
Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place. Can be used with or without a lift.
(7 reviews) -
Dobinsons
Dobinsons Greasable Bolt Pair | SP59-060
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Lower Control Arms w/Forged Rubber Ends – High Clearance | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with highly flexible rubber bushings installed
- Rubber bushings on both ends give the best possible ride quality
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Massive 2 inch DOM Tubing
- Maintenance Free Rubber Bushings
- High Clearance feature
- Black powder coated
- Sold as a pair, left and right
- Included studs to hold the brake lines
- Made in the USA
(12 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-110-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-110-R to L59-111-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
(6 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons UB59-453-2K Rear U-Bolts for Trucks and SUV’s
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 1998-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+ and other international trucks and SUV’s
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
- These are not compatible with a u-bolt flip kit, since those mount upside down on the axle
(10 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-112-R Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-112-R to L59-113-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- When installed, it will be the 6th leaf down from the top of the leaf pack
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
- If you need longer u-bolts due to a lack of threads left, use UB59-437K which are 30mm longer version of UB59-453-2K Ubolts
(4 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-111-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-111-R to L59-112-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
(7 reviews) -
250 Series Land Cruiser (2024-2025+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60660 2.6″ IFP Front Struts Pair
- Suits Toyota Land Cruiser 250 Series 2024+ and Lexus GX550
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 237mm (9.3″) from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- Shocks do not suit any models that have factory electronic adjustable Shock Absorbers
- Photos for illustration purposes only
(0 reviews)
Cart totals
| Subtotal | $9,011.00 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $709.76 |
| Total | $10,172.76 |
