“Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus” has been added to your cart. Continue shopping
You may be interested in…
-
Tacoma 2nd Gen (2005-2015)FREE SHIPPING
within 48 US StatesDirt King Performance Tacoma Lower Control Arms Pair for 2005-2015
- Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons GS59-088 Front Shocks Pair | Toyota 4Runner Pickup 1985 to 1995
- Suits Toyota 4Runner 1st and 2nd Gen, 1985 to 1995 models with torsion bar suspension, and Toyota Hilux/Pickup 1998 to 2004 models with IFS torsion bar suspension
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- 367mm extended, 237mm compressed
(9 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDirt King Performance Tacoma Lower Control Arms Pair for 2016-2023
- Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Sequoia 2nd Gen (2008-2022)
Dobinsons C59-477 1.75″ Rear Coils for Toyota Sequoia 2008-2022 5.7L V8 – Pair
- C59-477 are made specifically for the 2008 to 2022 Toyota Sequoia with the 5.7L V8 to give 1.75″ (45mm) of rear lift
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 624LBF/in spring rate
- Sold in Pairs
(16 reviews)$405.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-476 1.75″ Front Coils for Toyota Sequoia 2008-2022 5.7L V8 – Pair
- Dobinsons C59-476 Front 45mm Lift Coils, sold as a pair – suits Toyota Sequoia 2008 to 2022 5.7L V8 models
- Not suitable on vehicles that came with factory rear air suspension
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 367mm free height, 19mm wire, 685LBF/in rate
- Sold in Pairs
(16 reviews)$405.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesDirt King Performance Tundra Lower Control Arms Pair – Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra 2WD / 4WD and 2008-2022 Toyota Sequoia 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews) -
4Runner 3rd Gen (1996-2002)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50225 Rear 2.2″ IFP Shocks Pair | Toyota 4Runner 1990-02
- Suits Rear Toyota 4Runner 1990-2002 models
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- 530mm extended, 344mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
(18 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews)
Cart totals
| Subtotal | $4,899.30 |
|---|---|
| Shipping |
Shipping to FL. |
| Route Shipping Protection | $122.48 |
| Tax | $377.21 |
| Total | $5,528.99 |
