Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Apache Offroad HD Chromoly Front Adjustable Sway Bar Links | 4Runner FJ GX470 GX460 Tacoma
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS) and Tacoma 2005-2023
- Order 1 for 1 vehicle
- Adjustable (on vehicle) from 140mm – 180mm – Suits stock or lifted vehicles.
- Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
- Premium Silicone Dust Boots
- High Carbon Steel Center Link
- Black EDP Coating for corrosion resistance
- Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install
- Mounting hardware included
- Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation
- Sold as a pair
- Maintenance Free Design
- 2 year unlimited mile warranty
$199.00
In StockDescription
The Apache Offroad HD adjustable sway bar links were engineered to create a strong link between your sway bar and frame, as well as, correct your sway bar alignment post lift install. Over the years we have noticed that some customers have broken the studs in their links, causing potentially catastrophic failure to other components on the vehicle. Thus leading to the creation of our HD chromoly link set.
By positioning the sway bar to run parallel with the lower link (trailing arm,) you are able to maximize travel and handling of your vehicle.
- Adjustable (on vehicle) from 140mm – 180mm – Suits stock or lifted vehicles.
- Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
- Premium Silicone Dust Boots
- High Carbon Steel Center Link
- Black EDP Coating for corrosion resistance
- Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install.
- Mounting hardware included
- Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation.
- Sold as a pair
- Maintenance Free Design
- 2 year unlimited mile warranty
Note- If you lose a nut- the stud size is m12x1.5 and the stud / The locking nut going into the center link is 1/2″-20
Torque specs: We recommend using factory torque specs
Fitment:
- KDSS Equipped 4Runners and GX460s – KDSS Doesn’t utilize sway bar links. If KDSS has been deleted from your vehicle, a front sway bar can be easily mounted, the rear will require custom bracketry to be made. You will only need sway bar links though on non KDSS trucks utilizing a sway bar.
2003-2024 4Runner (Non KDSS) /Â KDSS- See Note Above
2007-2014 Toyota FJ Cruiser
2003-2009 Lexus GX470 (Non KDSS) / KDSS – See Note Above
2010-2023 Lexus GX460 – See Note Above
2005-2023 Toyota Tacoma
Installation Help:
Installation is quite simple. Remove the factory sway bar link, and install the Apache link. With the vehicle on the ground, at ride height, Adjust the sway bar link until the angle of the sway bar is running in parallel with the lower trailing arm (link.) You also want your sway bar end ball stud to stick out straight. When installed correctly the link should not look like its being pulled to the rear. Be sure to tighten both upper locking nuts as well as the rod end locking nut against the center link. Apply thread locker to nuts and torque to factory spec.
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner
2024 Toyota 4Runner
2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470
2010 Lexus GX460
2011 Lexus GX460
2012 Lexus GX460
2013 Lexus GX460
2014 Lexus GX460
2015 Lexus GX460
2016 Lexus GX460
2017 Lexus GX460
2018 Lexus GX460
2019 Lexus GX460
2020 Lexus GX460
2021 Lexus GX460
2022 Lexus GX460
2023 Lexus GX460
2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
2019 Toyota Tacoma
2020 Toyota Tacoma
2021 Toyota Tacoma
2022 Toyota Tacoma
2023 Toyota Tacoma
10 reviews for Apache Offroad HD Chromoly Front Adjustable Sway Bar Links | 4Runner FJ GX470 GX460 Tacoma
You must be logged in to post a review.
Related products
-
ExceptionsFREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
- Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
(14 reviews) -
DobinsonsPrice Increase Coming May 1st
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/INÂ variable spring rate
- Rear Long Travel Coils Installation Guide
(15 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
ExceptionsFREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons GS59-940 Pair Rear Shocks | Tacoma 05-23 Tundra 00-06
- Suits 2005 to 2023 Toyota Tacoma 4×4 and Tundra 2000 to 2006
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boots to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-940 Specifications: 614mm extended, 361mm compressed, 50mm body size
- Pin mount top, eyelet lower
- Available in Yellow or Black
- Sold in pairs
(8 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page
Benjamin (verified owner) –
Very good customer service, super friendly.
Edward (verified owner) –
It’s exactly what I wanted.
Joshua (verified owner) –
This is my go-to now for off road parts.
Travis (verified owner) –
Very good customer service, super friendly.
Joseph (verified owner) –
This is my go-to now for off road parts.
Nicholas (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Ryan (verified owner) –
It’s exactly what I wanted.
Thomas (verified owner) –
Value for money, super satisfied.
Patrick (verified owner) –
I received it really fast.
Jose (verified owner) –
Good quality, really nice.