Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Apex 2005-2023 Toyota Tacoma Rock Sliders
- Suits 2005-2023 Toyota Tacoma Access Cab Long Bed, Dual Cab Short Bed and Dual Cab Long Bed
- SIGNATURE “KICK-OUT” DESIGN
- All Pro Offroad Apex Tacoma Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks
- All-Pro Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube and 2″ square tube
- The shape of our Tacoma Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion.
- All-Pro Apex Rock Tacoma Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 2” square legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
$1,199.00
In StockDescription
Apex 2005-2023 Toyota Tacoma Rock Sliders
All-Pro APEX Tacoma Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube. Our APEX Tacoma Rock Sliders feature an innovative, one-piece mounting plate that runs down the frame, adding support to the weaker C-channel portion of the Tacoma’s frame while allowing for an easier bolt-on installation. Tacoma Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks. Pinch flange notching may be required due to slight variations between vehicles, and minimal drilling is needed for proper installation.
For the APEX Tacoma rock sliders legs, All-Pro uses fully gusseted 2″ square legs due to their higher resistance to bending when compared to round tubing. In fact, the square legs are 1.7 times more resistant to bending than our 2″ round legs. To get the equivalent strength out of round tubing, 3″ would have to be used, and there simply isn’t enough room to do that. The legs run from the mounting points to the outer structure and are one of the most important parts of the slider to ensure a long life without the worry of bending. The square legs are more expensive, but the extra cost pays off for the user for years to come. The square tubing also provides more surface area to be welded to the mounting plate which, again, just adds to the overall strength. Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion.
Available bare metal or finished in black powder coat. Choose your finish.
Vehicle Suitability:
2005 Toyota Tacoma Sliders
2006 Toyota Tacoma Sliders
2007 Toyota Tacoma Sliders
2008 Toyota Tacoma Sliders
2009 Toyota Tacoma Sliders
2010 Toyota Tacoma Sliders
2011 Toyota Tacoma Sliders
2012 Toyota Tacoma Sliders
2013 Toyota Tacoma Sliders
2014 Toyota Tacoma Sliders
2015 Toyota Tacoma Sliders
2016 Toyota Tacoma Sliders
2017 Toyota Tacoma Sliders
2018 Toyota Tacoma Sliders
2019 Toyota Tacoma Sliders
2020 Toyota Tacoma Sliders
2021 Toyota Tacoma Sliders
2022 Toyota Tacoma Sliders
2023 Toyota Tacoma Sliders
ALL-PRO products are warranted to be free from defects in materials and workmanship prior to installation. Any alteration, improper use, or modification will void this warranty. This warranty is extended by All-Pro to the original purchaser. This warranty is effective for 90 days from the date of purchase. Any description of the goods is for the sole purpose of identifying them, is not a part of the bargain, and does not constitute a warranty that the goods will conform to that description. Any sample, model or advertised item is for illustrative purposes only, is not part of the basis for the bargain, and is not to be construed as a warranty that the good will conform to the sample, model, or advertised item. No affirmation of fact or promise made by All-Pro will constitute a warranty that the goods will conform to the affirmation or promise.
Purchasers and users of our products are responsible for determining the applicability of a product to their specific application. In the event of a defect, malfunction, or failure to conform to this warranty, All-Pro will repair or replace the goods without charge within 30 days of receipt of goods. If All-Pro is unable to replace and/or repair the goods or if All-Pro, at its sole discretion, determines that neither option is commercially practicable or cannot be made within 30 days of receipt of the goods, All-Pro will refund the purchase price. The purchaser is responsible for installation and removal of all parts, freight or shipping costs, and incidental or consequential damages.
2005-APEX
TOYOTA TACOMA ACCESS CAB LONG BED or DOUBLE CAB SHORT BED
(2005-2023)
AP-306639
TOYOTA TACOMA DOUBLE CAB LONG BED
(2005-2023)
3 reviews for Apex 2005-2023 Toyota Tacoma Rock Sliders
You must be logged in to post a review.
Related products
-
SuspensionPrice Increase Coming May 1stDobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Pickup Trucks
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
DobinsonsPrice Increase Coming May 1st
Dobinsons PS59-4030 1/2″ Lift Alloy Strut Top Mount Spacer | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits various vehicles, as listed below
- Dobinsons PS59-4030 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Fits between the strut top mount and the chassis of the vehicle
- Note: See 2nd photo to make sure you have enough threads left to install the spacer. This vehicle came with short studs that don’t allow the spacer to be installed without changing out to thicker studs
(12 reviews) -
DobinsonsPrice Increase Coming May 1st
Dobinsons Strut Top Plates Pair | Toyota and Lexus Trucks & SUV’s
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2024, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons MRA59-A220 3-Way Adjustable MRR Front Struts Extended Travel Pair
- Suits 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470, Toyota Prado 120, and 2005-2015 Toyota Hilux Vigo
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Resi brackets bolt in between the stock front sway bar mount
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
(20 reviews)
Bryan (verified owner) –
Good quality, really nice.
Eric (verified owner) –
Very fast delivery.
Ryan (verified owner) –
Very good customer service, super friendly.