Bilstein 24-263108 Front 5100 Series Strut | Toyota Tacoma 2016-23

Related products

• 

  • 
  • 
  • 

  80 Series Land Cruiser (1990-1997)

  Dobinsons 3.5-4.5″ Lift Kit Builder | Toyota Land Cruiser 80 Series 1990-97 (All Options)

  • Suits Land Cruiser 80 Series and Lexus LX450
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • **Kit photo shows with every additional option purchased**
  • Coils are specifically suited to match OE spec and height
  • You’re either at stock weight (vehicle is not modified), or you have added constant weight, such as a bumper, winch, rack, drawers, 2nd fuel tank, etc.  Constant weight is permanently bolted onto the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • A Standard 4″ Base Kit should include front and rear shocks and coils, 5 degree castor plate kit, Front and Rear adjustable panhard rods, front sway bar extensions and rear proportioning valve extension and brake lines.  Make selections below
  • Select from Dobinsons Twin Tube, IMS Monotube, or MRA 3-way Adjustable Monotube Remote Reservoir shocks
  • You must choose what coils, shocks and other components you want to add
  • Bump Stop Requirements – 0-3″ Shocks, nothing needed.  4″ and 6″ shocks require the following bump stop extensions:
    • 4″-5″ front shocks – GS45-912, IMS45-60912 and MRA45-A912 require 1/2″ of bump stop extension with a minimum of 525mm coil length
    • 4″-5″ rear shocks – GS59-687, IMS59-60687 and MRA59-A687 require 2″ bump stop extension with a minimum of 505mm coil length
    • 6″-7″ front shocks – GS59-684, IMS59-60684 and MRA59-A684 require 1.5-2″ bump stop extension with a minimum of 570mm coil length
    • 6″-7″ rear shocks – GS59-685, IMS59-60685 and MRA59-A685 require 3″ bump stop extension with a minimum of 555mm coil length
    • The super long travel IMS59-60689 and IMS59-60681 require custom bump stop placement

  Rated 5.00 out of 5

  (13 reviews)

  From $1,600.00 Select options
• 

  • 
  • 

  4Runner 4th Gen (2003-2009)

  Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s

  • Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
  • Keeps CV angles at a good working angle
  • Suitable for lifts over 2.0″.  There’s really no benefit to adding them if there’s less lift than 2.0″
  • Includes all necessary hardware, including machined spacers and nuts/bolts
  • Includes 2 different lengths of the long bolts as some vehicles need them longer than others
  • Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
  • Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
  • Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
  • Installation Instructions

  Rated 5.00 out of 5

  (17 reviews)

  $65.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Dobinsons Adjustable Rear Lower Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), and Lexus GX470, GX460, Prado 120 and 150
  • Adjustable Design: Enables fine-tuning of the rear axle’s pinion angle, crucial for vehicles with suspension lifts.​
  • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then powder coated black, for the ultimate finish and protection
  • Easy Installation: Designed as a direct replacement for factory arms, facilitating straightforward installation without the need for additional modifications
  • Link to matching upper arms

  Rated 5.00 out of 5

  (14 reviews)

  $450.00 Add to cart
• 

  • 
  • 
  • 

  4Runner 4th Gen (2003-2009)

  THIS SHIPS FREE
  within 48 US States

  Dobinsons Tubular UCA Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460, Prado 120 and 150
  • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Has more clearance around the ball joint than factory UCA’s for better tire clearance
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height, as factory alignment correction will be enhanced with these
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Curved washers face outwards away from bushings during installation, per the product video
  • Product Video
  • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
  • Installation Guide
  • Replacement Ball Joints can be ordered here

  Rated 5.00 out of 5

  (8 reviews)

  $875.00 Add to cart