Dirt King 2.5 4Runner DCA Remote Resi Coilovers | 2003-2024

You may also like…

• 

  • 
  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.5 DCA Remote Resi Shocks | 4Runner FJ GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
  • Suits up to 1.5″ of lift
  • Dual Compression Adjuster (DCA) is on the resi to fine tune the ride quality
  • Dual Compression Adjusters with 10 adjustments for each knob
  • Increased suspension travel
  • Specific valving for each vehicle providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Remote reservoir equipped with dual compression adjusters allowing for high-speed and low-speed compression adjustments
  • Less seal drag with the 3/4″ shafts compared to traditional 7/8″ shafts resulting in smoother operation
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2.5″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 3/4″ shafts
  • What’s Included:
    • 2.5 DCA shocks with remote reservoirs Pair
    • Shock shaft boots
    • Reservoir mounts
    • All necessary mounting hardware
    • Installation instructions
    • Installation video is down below

  Rated 4.50 out of 5

  (4 reviews)

  $1,567.02 Add to cart
• 

  • 
  • 
  • 

  Full Suspension Kits - 5th Gen 4Runner

  FREE SHIPPING
  within 48 US States

  Dobinsons 2-3.5″ Extended Travel 3-Way Adj MRA Coilovers | 4Runner 5th Gen

  • Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models – Extended Travel
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • A 4×2 model lifts 1″ extra with the 4×4 lift heights
  • Select your desired lift height and spring rate – we’ll take care of the rest!!
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • MRA59-A574 Extended Travel – 575mm extended, 420mm compressed
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height
  • Resi installation instructions
  • To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment.  A diff drop kit is also recommended to minimize CV binding at full droop
  • Link to Matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order
  • Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge.  Many vehicles come in at different heights from the factory based on trim levels and options

  Rated 5.00 out of 5

  (3 reviews)

  $1,795.00 Select options
• 

  • 
  • 

  Dirt King Fabrication

  FREE SHIPPING
  within 48 US States

  Dirt King 2.0 IFP 4Runner Coilovers Pair | 4Runner 2003-2024

  • Suits Toyota 4Runner 4th Gen and 5th Gen 2003-2024
  • Increased suspension travel
  • Vehicle specific valving providing optimal ride comfort
  • Aluminum body for cooler operation and corrosion resistance
  • Direct bolt-on replacement that uses factory shock mounting location
  • Maxima custom oil blend. The proprietary light viscosity semi-synthetic oil blend is low friction and extremely resistant to high operating temperatures
  • Cold wound, high-tensile alloy steel coil springs that retain consistent rate and ride height
  • Completely rebuildable and serviceable. All tools and replacement parts can be purchased from Dirt King
  • 2″ hard-anodized 6061 aluminum bodies
  • Progressive valving
  • Internal floating piston
  • Induction-hardened 5/8″ shafts
  • Provides up to 3” of lift | Must be paired with aftermarket UCA
  • Note: We do not recommend lifting the vehicle more than 3″. Excessive preload will reduce the ride quality
  • What’s Included:
    • 2.0 Dirt King IFP Series coilovers Pair
    • Coils installed are 13” long, 700 LBF/in Spring Rate
    • Sway bar relocation mounts
    • Spanner wrench to adjust height/preload
    • All necessary mounting hardware
    • Installation instructions
  • Matching Rear Shocks

  Rated 4.50 out of 5

  (4 reviews)

  $1,175.02 Add to cart