Your cart is currently empty!
within 48 US States
Dirt King Tacoma Shock Relocation Kit | 2005-2023 Tacoma
- Suits 2WD and 4WD 6-Lug 2005-2023 Toyota Tacoma models
- Shocks mounted in the factory location typically measure 2.5″ x 8″, the Dirt King relocation kit is designed to accommodate for 2.5″ x 12″ shocks – like These
- Includes left and right hand sides and all hardware (welding required)
- All metal is shipped raw, as it requires welding – you paint when it’s all done
- Rear shock mounts
- Shock tabs
- Shock tab gussets
- Low profile wrench
- Reservoir mounts
- Grade 8 mounting hardware
- Dirt King sticker pack
- Installation Instructions
- Suitable with Dobinsons 12″ Travel Smoothie MRA Shocks
$734.02
In StockDescription
Introducing the Dirt King Rear Shock Relocation Kit for the 2005-2023 Tacoma. This kit is engineered to maximize rear suspension travel by increasing shock stroke by 50%. Shocks mounted in the factory location typically measure 2.5″ x 8″, the Dirt King relocation kit is designed to accommodate for 2.5″ x 12″ shocks. This allows for significantly improved vehicle articulation, increasing down travel without sacrificing up travel. The kit comes complete with 3/16″ lower shock tabs and all the necessary hardware for a straightforward installation. For optimal performance, we recommend pairing this kit with aftermarket leaf springs and the Dirt King Shackle and Hanger Kit to fully unleash your vehicle’s potential.
Specifications:
- Amount of Lift: 0-3” (based off leaf spring spec)
- Track Width: Requires 1.5″ wheel spacers
- Maximum Backspacing: 4.5″
What’s Included?
- Rear shock mounts
- Shock tabs
- Shock tab gussets
- Low profile wrench
- Reservoir mounts
- Grade 8 mounting hardware
- Dirt King sticker pack
- Installation Instructions
Features
- CAD designed
- Professionally MIG welded
- Proudly made in the USA
Compatibility
2005-2023 Toyota Tacoma 2WD / 4WD
Vehicle Fitment:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma
2016 Toyota Tacoma
2017 Toyota Tacoma
2018 Toyota Tacoma
2019 Toyota Tacoma
2020 Toyota Tacoma
2021 Toyota Tacoma
2022 Toyota Tacoma
2023 Toyota Tacoma
Dirt King develops advanced suspension systems for most vehicle makes and models. All of our products are held to the highest standards with quality setting us apart from the rest.
Disclaimer
All products sold or manufactured by Dirt King are intended for off-road use only. Our products are strictly engineered and tested and are not to be modified from their original design in any way. Welding should always be done at a qualified and certified facility only. Customer assumes all liability in assuring that parts are installed correctly, maintained, and not modified or altered in any way. Dirt King is not responsible or liable for any accidents, injuries, or deaths that may occur from the use of any products offered. Suspension modifications may change the dynamics and stability characteristics of the vehicle. Ensuring prompt wheel alignment and ADAS recalibration after suspension modifications is critical and the sole responsibility of the customer.
Additional information
Weight | 32 lbs |
---|---|
Dimensions | 17 × 17 × 6 in |
4 reviews for Dirt King Tacoma Shock Relocation Kit | 2005-2023 Tacoma
You must be logged in to post a review.
You may also like…
-
MRA Remote Resi 3-Way Adjustable MonotubeFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA 2.6″ Smoothie Shock – 12″ Travel 3-Way Adjustable
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2522 – 12″ Travel Shock
- Extended Length: 33.42″ / 851mm
- Compressed Length: 21.48″ / 547mm
- Reservoir Length: 12″ / 300mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm / 7/8″
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
(7 reviews) -
MRA Remote Resi 3-Way Adjustable MonotubeFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons MRA 2.6″ Smoothie Shock – 10″ Travel 3-Way Adjustable
- Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
- MRA92-A2520 – 10″ Travel Shock
- Extended Length: 29.45″ / 750mm
- Compressed Length: 19.48″ / 496mm
- Reservoir Length: 10″ / 250mm
- Hose Length: 19.6″ / 500mm
- Rod Diameter: 22mm / 7/8″
- MRA means Monotube Remote (reservoir) Adjustable
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
- Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
- 2.6″ Shock Body precision honed to +/- 0.04mm
- Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
- Parker Steel braided, rubber coated high pressure hoses
- Lightweight CNC machined low friction floating piston
- 3 Stage FMJ+HNBR long life, low friction sealing system
- PTFE lined high quality spherical bearings
- Fully rebuildable and tunable
- Dual rate design with high quality slider & cross-over rings
- 64mm Finned Reservoir
- 350V.I. High performance damper fluid
- T6061 CNC machined ultra high flow race piston
- Includes universal reservoir isolators and hose clamps
- Replacement shims and misalignment spacers are included
- SINGLE SHOCK INCLUDED (Add two to cart for pair)
- WARNING PLEASE READ this notice about misalignment spacers
- Fully detailed guide and owners manual – MUST READ before ordering to understand setting up the shocks
- Limited Warranty details down below
(7 reviews)
John (verified owner) –
Good quality, really nice.
Matthew (verified owner) –
Would definitely buy from this site again.
Benjamin (verified owner) –
Would definitely buy from this site again.
Scott (verified owner) –
Great description on the page, easy to understand what I was buying.