Ships FREE !!
within 48 US States

Dobinsons MRA 2.6″ Universal Smoothie Shock – 10″ Travel Shock

  • Dobinsons MRA 2.6″ Body Universal Smoothie Shock – offered in 10″, 12″ and 14″ Travel lengths
  • MRA92-A2520 – 10″ Travel Shock
  • Extended Length: 29.45″ / 750mm
  • Compressed Length: 19.48″ / 496mm
  • Reservoir Length: 10″ / 250mm
  • Hose Length: 19.6″ / 500mm
  • Rod Diameter: 22mm
  • MRA means Monotube Remote (reservoir) Adjustable
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 5140 HV900 Hard Chrome Plated, Heat Treated 22mm micro-polished high strength shock shaft.
  • Shaft minimum tensile strength exceeding 700MPA / 100 PSI and hardness exceeding 46HRC
  • 2.6″ Shock Body precision honed to +/- 0.04mm
  • Zinc plated DOM 3mm steel shock body for ultimate corrosion protection
  • Parker Steel braided, rubber coated high pressure hoses
  • Lightweight CNC machined low friction floating piston
  • 3 Stage FMJ+HNBR long life, low friction sealing system
  • PTFE lined high quality spherical bearings
  • Fully rebuildable and tunable
  • Dual rate design with high quality slider & cross-over rings
  • 64mm Finned Reservoir
  • 350V.I. High performance damper fluid
  • T6061 CNC machined ultra high flow race piston
  • Includes universal reservoir isolators and hose clamps
  • Replacement shims and misalignment spacers are included
  • SINGLE SHOCK INCLUDED (Add two to cart for pair)
  • WARNING PLEASE READ this notice about misalignment spacers
  • Fully detailed guide and owners manual MUST READ before ordering to understand setting up the shocks
  • Limited Warranty details down below

$625.00

In Stock

Description

Universal Shocks / Coilovers

  • MRA92-A2520 – 10″ Travel Shock
  • Extended Length: 29.45″ / 750mm
  • Compressed Length: 19.48″ / 496mm
  • Reservoir Length: 10″ / 250mm
  • Hose Length: 19.6″ / 500mm
  • Rod Diameter: 22mm

HIGH PERFORMANCE RACE-BRED MONOTUBE TECHNOLOGY

Dobinsons Spring & Suspension’s new High Performance UNIVERSAL COILOVER & LONG TRAVEL SHOCK ABSORBER. Tailored for custom and long travel suspension setups – these products offer ADVANCED ADJUSTABILITY in compression and rebound. Elevate your off-road experience with Dobinsons superior suspension technology.


Dobinsons MRA 2.6in Universal Coilovers and Shocks

This new range of 2.6” ADJUSTABLE REMOTE RESERVOIR DUAL RATE COILOVERS & LONG TRAVEL SHOCK ABSORBERS have been designed and manufactured with the highest level of performance and reliability in mind. Manufactured from HIGH STRENGTH DOM 3MM WALL STEEL TUBING, Dobinsons Coilovers/Shocks utilise a 2.6”/66MM BODY, with a 2.35”/60MM HIGH-FLOW CNC MACHINED T6 6061 PISTON, designed to be fitted with 3” INSIDE DIAMETER COIL SPRINGS.


Dobinsons MRA 2.6in Universal Coilovers and Shocks Dobinsons MRA 2.6in Universal Coilovers and Shocks Dobinsons MRA 2.6in Universal Coilovers and Shocks Dobinsons MRA 2.6in Universal Coilovers and Shocks
Dobinsons MRA adjustment settings

Dobinsons MRA 2.6in Universal Coilovers and Shocks

Dobinsons MRA components


Dobinsons MRA 2.6in Universal Coilovers and Shocks Dobinsons MRA 2.6in Universal Coilovers and Shocks Dobinsons MRA 2.6in Universal Coilovers and Shocks Dobinsons MRA 2.6in Universal Coilovers and Shocks Dobinsons MRA 2.6in Universal Coilovers and Shocks

Coilover Specs

Smooth Body Shock Specs

Coilover Coil Springs

Dobinsons MRA 2.6in Universal Coilovers and Shocks

Dobinsons Coilover springs undergo rigorous testing, including 100% load testing and scragging to eliminate any potential spring sag, ensuring they consistently meet and uphold the necessary specifications. Our in-house state-of-the-art testing equipment is utilized for comprehensive spring fatigue and hardness assessments. Each coil spring is meticulously wound by a programmable logic computer to achieve precise pitch. With over 40 different length and spring rate combinations available, our springs are crafted to deliver optimal performance.

Warranty Information

Dobinsons Spring & Suspension™ at its sole discretion will repair or replace any products supplied by them that are found to be defective in either materials or workmanship providing that Dobinsons Spring & Suspension™ are actually notified in writing from the Client of the alleged defect within one years (1 years) from date of invoice for Coil-Overs. Any claim not made within this period shall conclusively be deemed waived by the Client. Repair or replacement is preconditioned on the examination of the goods which on instructions from Dobinsons Spring &Suspension™ on, should be returned for further inspection to Dobinsons Spring & Suspension™ or to an Approved Importer. Coil-overs have a 1 year warranty providing the vehicle does not have a modified exhaust system the produces additional heat on the shock absorbers and does not cover damage caused by rocks or accidental damage.

Dobinsons Spring & Suspension™ products are designed for normal use and are in no way, covered under warranty should the vehicle be used in any form of extreme sports, competition racing or produce lift of 50mm or more. It is the responsibility of the fitter, to ensure that the customer or the owner of the vehicle is aware of the warranty conditions under which the products have been sold. It is highly recommended that the words “Suspension Components Fitted are for Normal Use Only. Warranty Void if used in extreme conditions” is written on their receipt to avoid any confusion.

Dobinsons Spring & Suspension™ will not pay for costs incurred in forwarding or returning goods. This warranty does not cover and Dobinsons Spring & Suspension™ makes no warranty with respect to; (1) any merchandise that is abused, misused, misapplied, neglected or altered; or that is improperly or incorrectly installed or maintained or used; or that is subjected to abnormal conditions of use, temperature, moisture, dirt or corrosive matter; (2) Goods bought for industrial, mining or agricultural use; (3) Goods no longer required by Client; (4) Goods incorrectly chosen by Client; (5) Goods modified or altered by client; and (6) any merchandise, materials, parts or other components supplied by someone other than Dobinsons Spring & Suspension™.

Dobinsons Spring & Suspension™ shall not be liable for any expenses incurred by Client in order to remedy any defect in its product. Dobinsons Spring & Suspension™ shall not be liable for any freight, labor, consequential, special, indirect or contingent damage or expense arising Directly or Indirectly from any defect in its products or from use of any products.

Client agrees to indemnify and hold Dobinsons Spring & Suspension™ harmless from and against any loss, injury or damage, to person or property, that extends beyond the warranties set forth above, whether the claims against Dobinsons Spring & Suspension™ or the damages are incidental or consequential.

Installation of after-market items to your vehicle may adversely affect, void or violate the Manufacturers terms of warranty on your vehicle. Review the terms of your vehicle warranty prior to purchase and/or installation of any after-market part or accessory. Dobinsons Spring & Suspension™ does not make any representations or warranties of any kind as to suitability or fitness for a particular vehicle or purpose. Dobinsons Spring & Suspension™ shall not be responsible or liable for direct or indirect damages as a result of the purchase and/or installation of these after-market products.