Dobinsons Coilover colors on black struts

dobinsons IMS specifications specs sheet

2023 Tundra 4x4 with Dobinsons IMS 2.5in front 1.0in rear

Dobinsons 2.0-3.0″ Pre-Assembled IMS Coilovers for Toyota Tundra 2022+

Suits Toyota Tundra 2022+ Models
TRD Pro Models yield 1″ less lift than listed here, as they are already lifted taller than base models
66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
Looking for a quick and easy way to lift your Tundra? This is your answer
Select your desired lift height and tell us your weight – we’ll take care of the rest!!
Dobinsons IMS are height adjustable by a threaded body with adjustable collar
The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
Fully rebuildable and re-valvable
SOLD IN PAIRS – READY TO BOLT IN
Zero shock fade in all terrains with full load
Direct, bolt-on replacement for easy fitment
IFP – Internal Floating Piston, separates oil and nitrogen
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
Full 2 year limited warranty, no set rebuild time period
Photos for illustration purposes – Tundra IMS coilovers use a slightly different top mount
Instructions for setting and adjusting coil seat height
Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
If doing a 2.5″ lift or higher in the front, a diff-drop kit or longer TRD CV-axles are REQUIRED, failure to complete these requirements could cause OE CV-axle failure
TRD axle shafts: PT362-3432B and PT362-3431B
Standard Coil seat height for IMS59-60446 is set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
Link to Matching rear shocks

$1,270.00

In Stock

Select Coil Spring Color *

Coil spring color is subject to availability (call or email to check). Choose your preferred color here, and if that is not available, we will contact you with an ETA or other options.

Select Lift Height *

Lift height is based on whether or not you have any constant added weight, such as a bumper and winch on the front end (usually 200-220LBS)

SKU: 22TUNDRAIMSCOILOVERS Categories: Coilovers, Dobinsons, Full Suspension Kits - Tundra 3rd Gen, Struts + Shocks - Tundra 2022+, Suspension, Tundra 3rd Gen (2022-2024) Tags: c59-834, c59-836, c59-838, c59-840, ims59-60446, sc59-014 Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons IMS Tundra Coilovers set for Toyota Tundra 3rd Gen Trucks 2022+ models, this setup allows you to choose what color, spring rate and lift height you want your Dobinsons IMS set to, so that they can bolt right into your rig. With a massive 2.6″ body, these will give you the excellent on and off-road performance you’re looking for. Lift your Toyota Tundra and bolt in these Dobinsons IMS Tundra Coilovers to gain a significant ride quality improvement over your stock suspension, while getting that necessary added ground clearance under the front end of your IFS vehicle. Just don’t forget, the more lift you add, the more other parts that also should be added for geometry correction.

Link to Youtube video detailing the IMS shocks: https://youtu.be/Npfx40VD3kM

Dobinsons IMS Tundra Coilovers – IMS Monotube IMS59-60446 Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS59-60446 Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

Check out all the options for your Tundra here: https://exitoffroad.com/product-category/toyota/tundra/tundra-3rd-gen/

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

2022 Toyota Tundra Lift Kit
2023 Toyota Tundra Lift Kit
2024 Toyota Tundra Lift Kit
2025 Toyota Tundra Lift Kit

2022 Toyota Tundra Coilovers
2023 Toyota Tundra Coilovers
2024 Toyota Tundra Coilovers
2025 Toyota Tundra Coilovers