Jeep gladiator wrangler black Dobinsons IMS kit

Dobinsons 2″ IMS Suspension Kit for Jeep Gladiator JT (1)

Dobinsons 3" IMS Suspension Kit for Jeep Wrangler JL

dobinsons IMS specifications specs sheet

Dobinsons WA29-558K Adjustable Front Lower Arms - JL Wrangler Gladiator JL JT Adjustable Front Lower Arms

Dobinsons SE29-568 Front Extended Sway Bar Link Kit for the 2018+ Jeep Gladiator and the 2018+ Jeep JL Wrangler 2-door and 4-door. Dobinsons Jeep JL JT Front Extended Sway Bar Link Kit for the 2018+ Jeep Gladiator and the 2018+ Jeep JL Wrangler 2-door and 4-door

Dobinsons SE29-575 Rear Extended Sway Bar Link Kit for the 2018+ Jeep Gladiator and the 2018+ Jeep JL Wrangler 2-door and 4-door

Ships FREE !!
within 48 US States

Dobinsons 2-3″ IMS Suspension Kit for Jeep Gladiator JT

For 2020+ Jeep Gladiator JT
Select your lift height from 2″ up to 3″
Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
Coils are specifically suited to the additional accessory load (weight) on the vehicle
Fully rebuildable and re-valvable
Zero shock fade in all terrains with full load
Direct, bolt-on replacement for easy fitment
IFP – Internal Floating Piston, separates oil and nitrogen
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
Full 2 year limited warranty, no set rebuild time period
High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
Base Kit Includes 2 Front IMS Monotube Shocks, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences

From $1,810.00

In Stock

Select Color of Front and Rear Coils

If your choice is not available, we will email you with other options or an ETA. Some coils are only made in 1 color, as listed below

Select Front Coils

C29-226 - 2" lift with stock load up to 110lbs (TEAL ONLY)
C29-234 - 2" lift with heavy load 110-220lbs (TEAL ONLY)
C29-228V - Lifts 3" with stock front end weight (TEAL OR BLACK)
C29-232V - Lifts 3" with 100-200LB front end load (bumper, winch, etc) (TEAL OR BLACK)

Front Shocks

Select Rear Coils

C29-229V - 2" Lift with Stock Load up to 220LBS (TEAL OR BLACK)
C29-243V - 2" Lift with 440-660LBS Rear End Load (TEAL ONLY)
C29-245V - 2" Lift with 880-1210LBS Rear End Load (TEAL ONLY)
C29-233V - 3" Lift with Stock Load (TEAL OR BLACK)
C29-247V - 3" Lift with 440-660LBS Rear End Load (BLACK ONLY)
C29-249V - 3" Lift with 880-1210LBS Rear End Load (BLACK ONLY)

Rear Shocks

Front Steering Damper

Dobinsons SS29A844 Adjustable Monotube Steering Damper offers increased steering control and reduces unwanted steering forces in both directions normally found in conventional steering dampers.

Front Sway Bar Links

At 3" of lift, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this. Required for 3" of lift

Rear Sway Bar Links

At 3" of lift, the stock sway bar angle is out of alignment and inhibits proper articulation and comfort. Adding longer links corrects this. Required for 3" of lift

Front Extended Bump Stops

These are required to run with the Dobinsons shocks, unless you have some other bump stops in place already

Rear Bump Stop Extensions

The Dobinsons rear shocks will bottom out early if these bump stop extensions are not added

Front Adjustable Lower Control Arms

For heavy offroading, lower adjustable trailing arms help correct pinion angle, give better articulation, and are much much stronger than stock. Required for 3" of lift

Front Coil Isolators

Dobinsons has created a set of replacement polyurethane coil isolators to keep the coils nice and straight when lifted. When using variable rate coils on these Jeeps, they tend to bow out if these replacements aren't used

Front Track Bar

Allows you to re-center the axle once it has been lifted

Rear Track Bar

Allows you to re-center the axle once it has been lifted

Steering Upgrade

Rusty's all new steering link upgrade, includes everything you need to beef up the steering at the same time that you add the lift

Steering Box Brace

May as well do this while you're in there too, as the steering box is known to flex on the frame once bigger tires are added

SKU: IMSKITGLADIATOR Categories: Dobinsons, Full Suspension Kits, Full Suspension Kits - Gladiator, Gladiator JT 2020-2024+, Suspension Tag: ims Brand: Dobinsons Spring & Suspension

Description

Description

You have found the Dobinsons 2-3″ IMS Suspension Kit for 2020+ Jeep Gladiator JT. Dobinsons offers this complete suspension system for the 2020+ Jeep Gladiator JT, with various coil load options to suit whatever accessory weight you have added to your vehicle, and your desired lift height. You can start with a basic kit of 4 coils and IMS shocks, or you can build it up with as many options as you would like. Contact us directly if you have questions before ordering.

Dobinsons 2-3″ IMS Suspension Kit for Jeep Gladiator JT is designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, our 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As we export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons IMS Jeep monotube shock absorbers are designed for next level performance over twin tube shocks in those hot, harsh, demanding conditions. By utilizing the monotube design, Dobinsons IMS shock absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling. The micropolished, hard chromed and heat treat shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands, high quality Fuchs oil and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity without the need for frequent rebuilding or servicing. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping Characteristics in each IMS shock to ensure a balance of comfort, handling, vehicle control and off-road performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons 3″ IMS Suspension Kit for Jeep Gladiator coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

For 3″ of lift, the front and rear bump stop options should be selected so that you don’t bottom out your new shocks.

Check out more videos on our YouTube page: https://www.youtube.com/exitoffroad