Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Dobinsons IMS59-60786 Front Ext Travel 2.6″ IFP Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)
- Suits Toyota Land Cruiser 100 Series and Lexus LX470 Front End
- Requires full diff drop kit and UCA’s before installation
- Front shocks only. To order full kit, click here
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
$650.00
In Stock
SKU: IMS59-60786
Categories: 100 Series Land Cruiser IFS (1998-2007), Dobinsons, Exceptions, IMS Monotube, LX470, Shocks - 100 Series, Struts and Shocks, Suspension
Brand: Dobinsons Spring & Suspension
Description
Pair of front Dobinsons IMS59-60786 Internal Reservoir Monotube extended travel shocks for Toyota Land Cruiser 100 Series and Lexus LX470, suitable for 2-2.5″ of lift with the correct parts in place (new UCA’s and proper diff drop kit). They do come with new rubber bushings and required washers for installation.
For lift heights of 0″ to 2″ on the front, use Dobinsons IMS59-60782 shocks.
NOTE: If you do not have a proper diff drop kit installed, these shocks will over extend your CV axles and could cause damage.
Dobinsons IMS59-60786 IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.
The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.
The micro-polished, hard chromed and heat treated shock shaft, CNC aluminium high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.
Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride
Vehicle Suitability:
1998 Toyota Land Cruiser 100 Series
1999 Toyota Land Cruiser 100 Series
2000 Toyota Land Cruiser 100 Series
2001 Toyota Land Cruiser 100 Series
2002 Toyota Land Cruiser 100 Series
2003 Toyota Land Cruiser 100 Series
2004 Toyota Land Cruiser 100 Series
2005 Toyota Land Cruiser 100 Series
2006 Toyota Land Cruiser 100 Series
2007 Toyota Land Cruiser 100 Series
1998 Lexus LX470
1999 Lexus LX470
2000 Lexus LX470
2001 Lexus LX470
2002 Lexus LX470
2003 Lexus LX470
2004 Lexus LX470
2005 Lexus LX470
2006 Lexus LX470
2007 Lexus LX470
2008 Lexus LX470
17 reviews for Dobinsons IMS59-60786 Front Ext Travel 2.6″ IFP Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)
You must be logged in to post a review.
You may also like…
-
100 Series Land Cruiser IFS (1998-2007)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A786 MRA Extended Travel 3-Way Adjustable Front Shocks Pair | 100 Series (2-2.5″ Lift)
- Extended Travel Front Shocks for 100 Series and LX470 – these require a Diff Drop Kit and UCA’s to be installed for full articulation and to prevent axle binding
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Reservoir mounts to the empty holes forward of the shock on both sides
- Installation Instructions of the MRA Shocks
- Full 2 year limited warranty, no set rebuild time period
- 470mm extended and 315mm compressed
(13 reviews)
Related products
-
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews) -
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
(11 reviews) -
Dobinsons
Dobinsons C59-675V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 470mm free height, 16mm wire diameter, 157-230LBF/IN variable spring rate
(15 reviews)$305.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons Big Bore Land Cruiser Steering Damper for 60 70 80 series 1980-1997
- Suits Land Cruisers, Series 60, 61, 62, 70, 71, 73, 74, 75, and 80 series and Lexus LX450 from 1980-1997
- A new steering damper helps fight bump steer and makes driving offroad feel smoother from the driver’s seat
- If you don’t know how old your current steering damper is, then it’s time to replace it
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert
- Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals
- High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- 650mm extended, 420mm compressed
(7 reviews)
Matthew (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Nathan (verified owner) –
I received it really fast.
Bradley (verified owner) –
Value for money, super satisfied.
Kevin (verified owner) –
Very fast delivery.
Anthony (verified owner) –
Would definitely buy from this site again.
Bryan (verified owner) –
Very good customer service, super friendly.
Joshua (verified owner) –
Great description on the page, easy to understand what I was buying.
Andrew (verified owner) –
Very fast delivery.
Stephen (verified owner) –
Just what I needed.
Anthony (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Richard (verified owner) –
5 Stars!!
Kevin (verified owner) –
Value for money, super satisfied.
Robert (verified owner) –
Very fast delivery.
Nicholas (verified owner) –
Would definitely buy from this site again.
Anthony (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Jeremy (verified owner) –
Just what I needed.
Jesse (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.