Dobinsons IMS45-60114 IMS51-60116 IMS59-60683 IMS45-60914 IMS45-60912 IMS59-60684
dobinsons ims information info
dobinsons IMS specifications specs sheet
FREE SHIPPING
within 48 US States

Dobinsons IMS59-60684 Front 2.6″ IFP Shocks Pair | Land Cruiser 80 Series (6″ lift)

(14 customer reviews)
  • Suits Toyota Land Cruiser 80 Series 1990-97 and Lexus LX450 with 6″ of Lift or for Long Travel use
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 728mm extended, 432mm compressed

$650.00

In Stock
Share (0)
Total: 0 Total: 0
SKU: IMS59-60684 Categories: , , , , , Tags: , , Brand:

Description

Pair of front Dobinsons IMS59-60684 Internal Reservoir Monotube shocks for Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift.  They do come with new rubber bushings and required washers for installation.  Select Dobinsons coil springs based on desired lift height and load capacity.  Coil springs are all based on desired lift height, how much weight your vehicle has added over stock, and what type of ride quality you are looking for once it’s all been installed.

Dobinsons IMS59-60684 IMS Monotube Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilizing the Monotube design, Dobinsons IMS59-60684 IMS Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 50 and 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

For a video describing the features of the Dobinsons IMS Shocks and to get a hands on view of how they look, Check out this video here: https://youtu.be/Npfx40VD3kM

Vehicle Suitability:

1990 Toyota Land Cruiser 80 Series Front Shocks
1991 Toyota Land Cruiser 80 Series Front Shocks
1992 Toyota Land Cruiser 80 Series Front Shocks
1993 Toyota Land Cruiser 80 Series Front Shocks
1994 Toyota Land Cruiser 80 Series Front Shocks
1995 Toyota Land Cruiser 80 Series Front Shocks
1996 Toyota Land Cruiser 80 Series Front Shocks
1997 Toyota Land Cruiser 80 Series Front Shocks

1995 Lexus LX450
1996 Lexus LX450
1997 Lexus LX450

14 reviews for Dobinsons IMS59-60684 Front 2.6″ IFP Shocks Pair | Land Cruiser 80 Series (6″ lift)

  1. Scott (verified owner) –

    Exit Offroad really does know what they’re talking about, they have the best product pages.

  2. Nicholas (verified owner) –

    Very good customer service, super friendly.

  3. Stephen (verified owner) –

    *****

  4. Thomas (verified owner) –

    I received it really fast.

  5. Joseph (verified owner) –

    Value for money, super satisfied.

  6. Benjamin (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  7. Andrew (verified owner) –

    This is my go-to now for off road parts.

  8. Ryan (verified owner) –

    5 Stars!!

  9. Ryan (verified owner) –

    Good quality, really nice.

  10. Robert (verified owner) –

    *****

  11. Patrick (verified owner) –

    *****

  12. Daniel (verified owner) –

    5 Stars!!

  13. Scott (verified owner) –

    Great description on the page, easy to understand what I was buying.

  14. Shawn (verified owner) –

    Would definitely buy from this site again.

Add a review

You may also like…

  • Dobinsons MRA51-A116 MRA51-A114 MRA59-A683 MRA59-A684 MRA45-AA912
    • Dobinsons MRA51-A116 MRA51-A114 MRA59-A683 MRA59-A684 MRA45-AA912
    • Dobinsons MRA front shocks for 80 series Land Cruiser Installed
    • Dobinsons MRA shocks on an 80 series - Photo credit DeltaVS
    Suspension
    FREE SHIPPING
    within 48 US States

    Dobinsons MRA59-A684 3-Way Adjustable MRA Front Shocks Pair | 80 Series 6″ Lift
    • Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 6″ of lift
    • 3-way adjustable valving – Adjust high and low speed compression and rebound
    • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
    • 22mm / 7/8″ shaft diameter
    • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
    • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
    • 20 Stage Low Speed Compression – For creepy crawling and cornering
    • 15 Stage Rebound – Control your coils, prevent bucking
    • 60mm CNC Machined High Flow Billet Aluminum Race Piston
    • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
    • Upgraded 3 Stage FKM‐HNBR Sealing System
    • TSUGAMI™ CNC machined components for precise tolerances
    • Parker™ Braided High Pressure Hoses
    • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
    • T6 6061 Height Adjustable Spring Seat
    • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
    • 60mm Full 6063 aluminum remote reservoir
    • Lightweight CNC Machined Low Friction floating piston
    • High Quality O.E.M. Grade Natural Rubber Bushings
    • Single Piece Lower Leg
    • EDP Surface Protection
    • CNC TIG Precision Welded Body End Mounts
    • Fully Rebuildable Design
    • SOLD IN PAIRS
    • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
    • Installation Instructions of the MRA Shocks
    • 728mm extended, 432mm compressed
    • Bump stop extensions and longer brake lines must be run with these longer shocks
    • Full 2 year limited warranty, no set rebuild time period
    (20 reviews)
    $1,350.00 Add to cart

Related products

  • Dobinsons Single Coil Spacer
    Dobinsons

    Dobinsons Front 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
    • Suits Land Cruiser 80 Series and Lexus LX450
    • High Quality Polyurethane, maintains height over time
    • Perfect fit between OE isolator and coil seat
    • Sold individually, available front and rear for several vehicles
    • Lasts longer than rubber
    • Easy to add lift height for worn coils
    (4 reviews)
    $60.00 Add to cart
  • Dobinsons Upper Control Arms UCAs
    On Backorder
    • Dobinsons Upper Control Arms UCAs
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    • Dobinsons 5th gen 4runner IMS suspension installed with KDSS
    Exceptions
    FREE SHIPPING
    within 48 US States
    ETA is late December

    Dobinsons Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
    • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
    • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
    • Has 3 degrees of caster built in, no adjustability or settings required
    • Has more clearance around the ball joint than factory UCA’s for better tire clearance
    • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
    • Works for any lift height, as factory alignment correction will be enhanced with these
    • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
    • Curved washers face outwards away from bushings during installation, per the product video
    • Product Video
    • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
    • Also sold without ball joints
    • Replacement Ball Joints can be ordered here
    (8 reviews)
    $795.00 Add to cart
  • 80 Series Front Rear Panhard Rod 4Runner GX470 GX460 100 Series 200 Series
    Dobinsons

    Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
    • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
    • Replaces OE Rear Panhard Rod, adjustable to suit lift height
    • Re-centers the rear axle after lifting
    • Zinc plated steel and E-coated with high quality rubber bushes installed
    • Off-car adjustable, cannot be set while fully installed
    • For 45mm (1.75″) of lift or more
    • Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
    (11 reviews)
    $345.00 Add to cart
  • Dobinsons rear coil springs in teal color
    80 Series Land Cruiser (1990-1997)

    Dobinsons C59-234 Front Coil Springs | Land Cruiser 80 series 1990-1997 2.0″ Lift Comfort Ride – Pair
    • Suits Land Cruiser 80 Series and Lexus LX450
    • C59-234 are Front Linear rate coils to give 2.0″ of lift with no accessory weight
    • Fully Designed, Manufactured, and Finished In Australia
    • Ultra modern design technology, Fully Scragged & Load Tested
    • State of the Art Heat Treatment, High Intensity Shot Peened
    • Formed on Precision Mandrels, Precise End Configurations
    • Durable Powder Coat Finish
    • 500/510mm free height, 16mm wire, 179LBF/in rate
    • Sold in Pairs
    (3 reviews)
    $270.00 Add to cart