Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Price Increase Coming May 1st
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
$345.00
In StockDescription
Dobinsons 4Runner panhard rod part number PR59-1423.
Dobinsons Spring & Suspension Rear Heavy Duty Adjustable 4Runner Panhard rod for Toyota 4Runner from 2003-2024 (4th and 5th Generation), FJ Cruiser from 2007-2015, Lexus GX470 and GX460 (all years) suitable for vehicles lifted above 45mm (1.75″), realigning the rear axle to be centered. This will set the alignment properly and make sure the vehicle is tracking correctly. Comes complete with high quality rubber bushes for maximum articulation.
This Dobinsons 4runner panhard rod is also suitable for Toyota Land Cruiser Prado 120 and 150 models. These models are sold overseas.
Why would I need a new adjustable panhard rod? These panhard rods have been made so that you can realign the rear axle of your 4×4 after lifting it. It usually takes a lift height of more than 2″ for the rear axle to be offset to one side. This happens due to the rear suspension design, and when lifted, the axle stays more to one side due to the stock length panhard rod. A panhard rod could also be called a rear track bar. It is what keeps the rear axle centered left to right during suspension movement.
To set a panhard rod length, you would first measure your vehicle on the ground. Check with a measuring tape how far off center your rear wheels are from a fixed point on the frame. If it is pushed to one side by 1″, then you would add half that length (1/2″ in this case) to the overall length of the new panhard rod. Use the stock panhard rod length as your starting point, then add the extra length to it. That is how you would start to correct the centering of the rear axle, then adjust it from there if needed.
Note: For Off Road Use Only
Panhard Rod, Track Bar, same thing. It keeps the axle centered under the frame from side to side movement.
Check out the video about it here:Â https://youtu.be/qtkesMe4ddE
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
2010 Toyota 4Runner
2011 Toyota 4Runner
2012 Toyota 4Runner
2013 Toyota 4Runner
2014 Toyota 4Runner
2015 Toyota 4Runner
2016 Toyota 4Runner
2017 Toyota 4Runner
2018 Toyota 4Runner
2019 Toyota 4Runner
2020 Toyota 4Runner
2021 Toyota 4Runner
2022 Toyota 4Runner
2023 Toyota 4Runner
2024 Toyota 4Runner
2003 Lexus GX470
2004 Lexus GX470
2005 Lexus GX470
2006 Lexus GX470
2007 Lexus GX470
2008 Lexus GX470
2009 Lexus GX470
2010 Lexus GX460
2011 Lexus GX460
2012 Lexus GX460
2013 Lexus GX460
2014 Lexus GX460
2015 Lexus GX460
2016 Lexus GX460
2017 Lexus GX460
2018 Lexus GX460
2019 Lexus GX460
2020 Lexus GX460
2021 Lexus GX460
2022 Lexus GX460
2023 Lexus GX460
2006 Toyota FJ Cruiser
2007 Toyota FJ Cruiser
2008 Toyota FJ Cruiser
2009 Toyota FJ Cruiser
2010 Toyota FJ Cruiser
2011 Toyota FJ Cruiser
2012 Toyota FJ Cruiser
2013 Toyota FJ Cruiser
2014 Toyota FJ Cruiser
2015 Toyota FJ Cruiser
2016 Toyota FJ Cruiser
11 reviews for Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
You must be logged in to post a review.
Related products
-
DobinsonsPrice Increase Coming May 1stDobinsons Greasable Bolt Pair | SP59-060
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
- 14mm pin/shank thickness, 103mm long not counting the head of the bolt, 116mm total length from head of bolt to end
(12 reviews) -
80 Series Land Cruiser (1990-1997)Price Increase Coming May 1st
Dobinsons 80 Series Stock Height Restoration Suspension Kit 1990-1997 (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE spec and height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs. Add on additional parts if desired
(18 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons GS59-701 Rear Shocks Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
- Pin top mount, eyelet lower mount
- Available in Yellow or Black
- Photos for illustration purposes
(10 reviews)$310.00 Select options This product has multiple variants. The options may be chosen on the product page -
SuspensionFREE SHIPPING
within 48 US StatesPrice Increase Coming May 1stDobinsons Tubular UCA Pair | Toyota Tacoma Hilux Fortuner 2005-23
- Suits Toyota Tacoma from 2005 to 2023, Toyota Hilux Vigo and Revo from 2005+, and Toyota Fortuner 2005 to 2023
- Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered Here
(9 reviews)
Jeffrey (verified owner) –
Just what I needed.
Stephen (verified owner) –
Great description on the page, easy to understand what I was buying.
Richard (verified owner) –
Good quality, really nice.
Jonathan (verified owner) –
Spoke with Mike, he got me headed in the right direction for what I need.
Bryan (verified owner) –
It’s exactly what I wanted.
William (verified owner) –
This is my go-to now for off road parts.
Anthony (verified owner) –
Great description on the page, easy to understand what I was buying.
Scott (verified owner) –
Just what I needed.
John (verified owner) –
Very good customer service, super friendly.
Eric (verified owner) –
Value for money, super satisfied.
Shawn (verified owner) –
This is my go-to now for off road parts.