Sale!
Dobinsons Twin Tube Suspension Kit
Toyota Sequoia Dobinsons Suspension
Dobinsons Twin Tube Shocks features and benefits
On Sale All November!!

Dobinsons Stock Height Twin Tube Sequoia Suspension Kit for 2008-2022

(13 customer reviews)
  • Suits Toyota Sequoia models from 2008 to 2022
  • Complete suspension kit for on and Off Road Use, fine tuned to match the vehicle
  • Coils are stock height replacements front and rear to freshen up the suspension back to where it was when new
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
  • Does not suit rear air suspension equipped models
  • If assembling the front struts yourself, remove the silver aluminum droop spacer from the assembly process, so that the coil stays captured in the mount properly

Original price was: $1,470.00.Current price is: $1,249.50.

In Stock
Front Coils
Front Struts
Rear Coils
Rear Shocks
Add New Strut Mounts?
If you want to add new front strut top mounts so you don't have to separate the old coilovers and reuse the mounts, add that here
Add Front Strut Assembly?
If you want the front coils, struts and new strut mounts (must be added above) to be assembled prior to shipping, add that here
Add New Upper Control Arms (UCA's)?
If your suspension is worn out, your UCA's are probably worn too. New UCA's have new bushings and ball joints
Add Front Bump Stops?
If you go hard in this heavy vehicle, you should upgrade your bump stops up front to prevent harsh bottom outs and also protect your suspension investment. Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all.  Inspect your vehicle before ordering
Add Firestone Airbag Kit?
If you regularly tow with your Sequoia and need additional rear load support, this Firestone Ride-Rite kit goes inside your rear coils, and you can add or remove air pressure to them as needed.
Add New CV Boots?
When lifting an older vehicle, the age of the CV boots will show very quickly due to the new ride height. Changing out all the CV boots may be necessary depending on the age and mileage
Upgrade Front Brakes?
This is not required with the suspension, but considering that when adding a lot more weight and rolling mass to the vehicles, the stock brakes aren't doing the job they're supposed to. Adding the Powerbrake D-Line Rotor and Pad kit gives bolt-on excellent performance without needing to replace so many parts. Or go all out with the X-Line Big Brake Kit and add massive front stopping power with new 6-piston calipers, brake lines, pads and rotors (requires 18" wheels for caliper clearance)
Upgrade Rear Brakes?
Share (0)
Total: 0 Total: 0
SKU: 2NDGENSEQ-TTSTOCK Categories: , , , , Tags: , Brand:

Description

Dobinsons Sequoia Suspension Kit, Dobinsons offer this complete Stock Height suspension system for the 2008 to 2022 models with the 5.7L V8 looking to freshen up their suspension as well as add ground clearance.  This does not suit vehicles that come with factory Airbag suspension.

The fullsize SUV Toyota Sequoia has now been around since 2008 and a lot of them have really worn out suspension.  Dobinsons has been offering a Sequoia Lift Kit for many years now, but in 2020 they also came up with a 2.5″ front and rear Sequoia Lift Kit option.  Being one of a small few brands in the world offering a replacement suspension for this vehicle, check out all the options Dobinsons has to refresh the suspension on your Toyota Sequoia.

For an itemized list of all Dobinsons Sequoia products, click here: https://exitoffroad.com/product-category/toyota/sequoia/sequoia-2nd-gen/

Designed, developed and tested in Australia by Dobinsons Spring & Suspension, in-house suspension design engineers, Dobinsons 4×4 shock absorbers and coil springs are designed and tested to perform in the harshest conditions right across the world. As Dobinsons export to over 40 countries worldwide from their Australian head office, the importance of quality is at the forefront in the complete design and manufacturing process. This ensures every shock and coil spring can withstand the blistering heat and corrugations of the Australian outback right through to the subzero temperatures of a Russian winter.

Dobinsons Twin Tube Nitrogen Gas charged shock absorbers are made from the world’s highest quality external and internal parts sourced worldwide. They provide a significant increase in performance over the standard shock absorbers. Dobinsons twin tube shock absorbers feature larger bodies, larger bores and increased valving performance to dramatically improve vehicle handling and control and reduces shock fade.

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

**Photo for illustration purposes only

Vehicle Fitment:

2008 Toyota Sequoia Suspension Kit
2009 Toyota Sequoia Suspension Kit
2010 Toyota Sequoia Suspension Kit
2011 Toyota Sequoia Suspension Kit
2012 Toyota Sequoia Suspension Kit
2013 Toyota Sequoia Suspension Kit
2014 Toyota Sequoia Suspension Kit
2015 Toyota Sequoia Suspension Kit
2016 Toyota Sequoia Suspension Kit
2017 Toyota Sequoia Suspension Kit
2018 Toyota Sequoia Suspension Kit
2019 Toyota Sequoia Suspension Kit
2020 Toyota Sequoia Suspension Kit
2021 Toyota Sequoia Suspension Kit
2022 Toyota Sequoia Suspension Kit

13 reviews for Dobinsons Stock Height Twin Tube Sequoia Suspension Kit for 2008-2022

  1. John (verified owner) –

    *****

  2. Jonathan (verified owner) –

    It’s exactly what I wanted.

  3. Ryan (verified owner) –

    Would definitely buy from this site again.

  4. Travis (verified owner) –

    Very fast delivery.

  5. Shawn (verified owner) –

    *****

  6. William (verified owner) –

    Spoke with Mike, he got me headed in the right direction for what I need.

  7. Thomas (verified owner) –

    I received it really fast.

  8. Jose (verified owner) –

    Value for money, super satisfied.

  9. Joshua (verified owner) –

    Good quality, really nice.

  10. Gregory (verified owner) –

    5 Stars!!

  11. Thomas (verified owner) –

    Great description on the page, easy to understand what I was buying.

  12. Thomas (verified owner) –

    I received it really fast.

  13. Christopher (verified owner) –

    Would definitely buy from this site again.

Add a review

You may also like…

  • Firestone 4164 Ride Rite Kit
    • Firestone 4164 Ride Rite Kit
    • Firestone Ride Rite Installed
    Firestone
    FREE SHIPPING
    within 48 US States

    Firestone 4164 Coil-Rite Rear Helper Air Springs (Airbags) | 200 Series and Sequoia
    • Firestone 4164 Suits Toyota Landcruiser 200 Series and Lexus LX570 2008-2020, Toyota Sequoia 2008-2022 with coil springs in the rear
    • Complete kit – 1 per vehicle
    • Inserts inside your rear coil springs to add additional load support
    • Manually inflate or deflate the air bags to add or remove support or height
    • Perfect for people who tow, or regularly load up fully and need additional height or support
    • Works with all Dobinsons rear coils for these vehicles
    • Works with 0-1.5″ of lift
    • Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
    • Installation Manual, Click Here
    • We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
    (5 reviews)
    $144.12 Add to cart
  • Timbren Front Active Bump Stops ABSTOF
    • Timbren Front Active Bump Stops ABSTOF
    • Timbren Front Active Bump Stops
    Timbren
    FREE SHIPPING
    within 48 US States

    Timbren ABSTOF Active Off Road Front Bump Stops | Toyota and Lexus
    • Suits 2000-2024 Tundra,  2001-2024 Sequoia, 2005-2023 Tacoma, 1990-2024 4Runner, FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 and 200 Series
    • Also Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
    • Note: Some 2nd Gen Toyota Sequoia models have 2 sets of front bump stops, so ordering 2 of these kits will be necessary to replace them all.  Inspect your vehicle before ordering
    • Maintain Full Axle Travel
    • Smooth Axle Engagement and Disengagement
    • Enhance Suspension Performance
    • Progressive Spring Rate
    • Absorbs Energy and Cushions Road Shocks
    • Stronger Than OEM Bumpstops
    • Easy Installation – Installation Video
    • Satisfaction Guarantee
    • Lifetime Warranty
    • Click here for instructions
    (12 reviews)
    $269.36 Add to cart

Related products

  • Sale!
    • 80 Series Stock Height Lift Kit
    80 Series Land Cruiser (1990-1997)
    On Sale All November!!

    Dobinsons 80 Series Stock Height Restoration Suspension Kit (inc all shock options)
    • Suits Land Cruiser 80 Series and Lexus LX450
    • Restore your vehicle back to the original ride height, and bring the ride quality way up at the same time with the Dobinsons 80 Series Stock Height Suspension Kit
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • Coils are specifically suited to match OE spec and height
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Includes 2 Front Shocks, 2 Rear Shocks, and 4 Coil Springs.  Add on additional parts if desired
    (18 reviews)
    Original price was: $1,160.00.Current price is: $986.00. Select options
  • Sale! Dobinsons rear coil springs in teal color
    • Dobinsons rear coil springs in teal color
    • Dobinsons C59-613V 3 inch rear coils with IMS59-60687 4-5 inch IMS shocks
    • Dobinsons 3 inch flexi coils front and rear with 4-5 inch IMS shocks
    80 Series Land Cruiser (1990-1997)
    On Sale All November!!

    Dobinsons 80 Series Rear Coils Options for Land Cruiser 80 Series 1990-1997 0-6″ Lift – Pair
    • Suits Land Cruiser 80 Series and Lexus LX450
    • Choose what coil suits your vehicle and needs the best
    • Any part number with a V in it means it’s a variable rate/progressive rate spring
    • C59-221V – Stock height, variable rate
    • c59-269V – 1.75″ Comfort ride spring with only stock weight (variable rate)
    • C59-223V – 1.75″ lift with up to 220lbs weight (variable rate), 2.5″ with stock weight
    • c59-169 – 1.75″ with up to 220lbs weight
    • c59-171 – 2″ lift with 750lbs weight, OR 3″ lift with 440lbs weight
    • C97-147VT – 2.5″ lift with 440lbs weight (lifts more with less weight), (variable dual rate long travel)
    • c59-167 – 2.5″ with up to 220lbs weight, 2″ with 440lbs weight
    • c59-185 – 3″ lift with up to 220LBS weight, 2.5″ with 500LBS, 2″ with 800LBS
    • C59-153 – 3″ lift with 880LBS constant rear load
    • C59-613V – 3″ lift with up to 200 LBS (Flexi coils, variable rate)
    • C97-145VT – 3.5″ lift with 400LBS+ heavy load rear (variable dual rate long travel)
    • C59-615V – 4″ lift with up to 200 LBS (Flexi coils, variable rate)
    • c59-309 – 4″ lift with 110-220lbs weight
    • c59-313 – 4″ lift with 400-750lbs weight
    • c59-317 – 6″ lift with stock weight
    • c59-319 – 6″ lift with 200LBS constant weight
    • C59-311 – 6″ lift with 880LBS constant weight
    • Sold in Pairs
    • Click HERE to see the FRONT coil options
    • Lift heights may vary depending on the age of the vehicle, and all accessories and weight added to it
    (6 reviews)
    Original price was: $270.00.Current price is: $229.50. Select options
  • Sale! Dobinsons Square Top Ubolts
    Tundra 2nd Gen (2007-2021)
    On Sale All November!!

    Dobinsons Rear U-Bolts for Toyota Tundra 2007-21 (UB59-437K) (2 Pairs)
    • Made from the highest quality raw materials to give years of life under the harshest conditions
    • Over 60 years of leaf spring design and manufacturing
    • Includes 4 U-bolts, enough for 1 vehicle
    • Requires 2″ lift leaf springs to ensure proper fitment
    • These are a 30mm longer version of UB59-453-2K Ubolts
    • Photo for illustration purposes.  These are square at the top
    (7 reviews)
    Original price was: $90.00.Current price is: $76.50. Add to cart
  • Sale! Quick ride yellow and teal
    • Quick ride yellow and teal
    • Quick ride yellow and red
    • Quick ride yellow and black
    Tacoma 3rd Gen (2016-2023)
    On Sale All November!!

    Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
    • 4×4 Access Cab models come with 1″ front lift from the factory.  Lift heights listed are for Dual cab 4×4 models.  Subtract 1″ for access cab models
    • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
    • Coils are specifically suited to the additional accessory load (weight) on the vehicle
    • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
    • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
    • Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
    • You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
    • For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
    • Select desired lift height and additional options
    (13 reviews)
    Original price was: $930.00.Current price is: $790.50. Select options