Your cart is currently empty!
within 48 US States
Rusty’s Forged Adjustable Sway Bar Quick Disconnects | TJ LJ XJ MJ ZJ
- Suits the following Jeep models
- 1997-2006 TJ Wrangler
- 2003-2006 LJ Unlimited
- 1984-2001 XJ Cherokee
- 1986-1993 MJ Comanche
- 1993-1998 ZJ Grand Cherokee
- 1997-2006 TJ Wrangler
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
- Built in Rainbow City, Alabama, USA
$167.00
In StockDescription
Rusty’s has offered various forms of sway bar quick-disconnects over the years, but each design produced by other companies had some limitation of one form or another, so Rusty’s decided to design and build our own! These disconnects offer ease of use, tremendous adjustability, unbeatable vehicle coverage, and major strength all in one package!
Rusty’s Adjustable Sway Bar Disconnects are available to fit all popular Jeep models, including JK, TJ, and YJ Wranglers, LJ Unlimiteds, XJ Cherokees, WJ and ZJ Grand Cherokees, and even CJs! The adjustable design accommodates lift kits between 2″ and 8.5″ of lift, and they can be adjusted without removing them from the vehicle. The forged steel construction is exceptionally strong and has a similar design to our bulletproof Forged Flex suspension joints. Stainless steel and Grade 8 hardware round out these exceptional links. When hooked up and properly adjusted, they allow the suspension to function just as it normally would, but by pulling a couple of pins, you free up suspension flex for exceptional off-road traction. These disconnects work with all of Rusty’s suspension systems as well as most other brands.
All necessary brackets and hardware are included. Priced per pair. Fits front sway bars only.
KEY FEATURES:
- Fits: TJ, LJ, XJ, MJ, and ZJ all years!
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
These Disconnects fit the following vehicles:
• 1997-2006 TJ Wrangler
• 2003-2006 LJ Unlimited
• 1984-2001 XJ Cherokee
• 1986-1993 MJ Comanche
• 1993-1998 ZJ Grand Cherokee
Vehicle Suitability:
1997 Jeep Wrangler TJ
1998 Jeep Wrangler TJ
1999 Jeep Wrangler TJ
2000 Jeep Wrangler TJ
2001 Jeep Wrangler TJ
2002 Jeep Wrangler TJ
2003 Jeep Wrangler TJ
2004 Jeep Wrangler TJ
2005 Jeep Wrangler TJ
2006 Jeep Wrangler TJ
2003 Jeep Wrangler LJ
2004 Jeep Wrangler LJ
2005 Jeep Wrangler LJ
2006 Jeep Wrangler LJ
1984 Jeep Cherokee XJ
1985 Jeep Cherokee XJ
1986 Jeep Cherokee XJ
1987 Jeep Cherokee XJ
1988 Jeep Cherokee XJ
1989 Jeep Cherokee XJ
1990 Jeep Cherokee XJ
1991 Jeep Cherokee XJ
1992 Jeep Cherokee XJ
1993 Jeep Cherokee XJ
1994 Jeep Cherokee XJ
1995 Jeep Cherokee XJ
1996 Jeep Cherokee XJ
1997 Jeep Cherokee XJ
1998 Jeep Cherokee XJ
1999 Jeep Cherokee XJ
2000 Jeep Cherokee XJ
2001 Jeep Cherokee XJ
1986 Jeep Comanche MJ
1987 Jeep Comanche MJ
1988 Jeep Comanche MJ
1989 Jeep Comanche MJ
1990 Jeep Comanche MJ
1991 Jeep Comanche MJ
1992 Jeep Comanche MJ
1993 Jeep Comanche MJ
1993 Jeep Grand Cherokee ZJ
1994 Jeep Grand Cherokee ZJ
1995 Jeep Grand Cherokee ZJ
1996 Jeep Grand Cherokee ZJ
1997 Jeep Grand Cherokee ZJ
1998 Jeep Grand Cherokee ZJ
Rusty’s Off-Road is a leader in the 4X4 industry with our innovative line of Jeep specific products. Our in-house manufacturing and R & D keeps our products on the cutting edge. With our in house manufacturing we are able to control cost and sell retail at wholesale cost without sacrificing quality.
We have over 45 years of hands on experience in the off-road vehicle industry giving us the knowledge that few of our competitors have. Rusty’s has grown from a small business serving a regional market to a worldwide company. We have grown from a small 2 bay shop to an ever growing 65,000 square foot building. Yes, we too started off with torches and big hammers but today it’s high-tech measuring devises, precision machining centers, lasers, robots and a group of very dedicated employees to produce what we think are the very best in off road products.
We proudly back our products as ‘Trail Tested Tough.’ Each of our parts go through extensive prototype testing on the trails, allowing us to improve and strengthen our designs so we release only the highest quality products. Moab, Rubicon, Tellico, Wind Rock, and Jeep Jamboree events around the country have been regular stomping grounds for the Rusty’s Off Road Testing Crew over the years. Many parts have been run and tested in some of the most grueling off road races and rallies and with this abuse and testing you can be assured you will be getting the very best part built.
7 reviews for Rusty’s Forged Adjustable Sway Bar Quick Disconnects | TJ LJ XJ MJ ZJ
You must be logged in to post a review.
You may also like…
-
Dobinsons
Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place. Can be used with or without a lift.
Rated 5.00 out of 5(7 reviews)
Related products
-
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- This is a comparable option to OME 2884 coils, which are 390mm free height, 16mm wire, 590LBF/in spring rate
Rated 5.00 out of 5(15 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Toyota 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Works for any lift height, as factory alignment correction will be enhanced with these
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Curved washers face outwards away from bushings during installation, per the product video
- Product Video
- Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
- Replacement Ball Joints can be ordered here
Rated 5.00 out of 5(8 reviews) -
Dobinsons
Dobinsons C59-325 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 420mm free height, 17mm wire diameter, 220LBF/IN Spring Rate
Rated 5.00 out of 5(14 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Front IFS Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Suits 2005-23 Toyota Tacoma, 2003-2024 4Runner, 2007-16 FJ Cruiser, Lexus GX470, GX460
- Keeps CV angles at a good working angle
- Suitable for lifts over 2.0″. There’s really no benefit to adding them if there’s less lift than 2.0″
- Includes all necessary hardware, including machined spacers and nuts/bolts
- Includes 2 different lengths of the long bolts as some vehicles need them longer than others
- Compliments Dobinsons 3″ lifts for IFS Toyota and Lexus vehicles
- Simply remove the front skid plate, remove the 2 long bolts at the front of the diff, install the spacers and long bolts supplied, install the skid plate spacers and longer bolts supplied while reinstalling the skid plate
- Note: Some aftermarket skid plates have spacers built-in so the small spacers aren’t necessary, and some skid plates may use larger bolts to install it to the vehicle, requiring modification to the supplied spacers
- Installation Instructions
Rated 5.00 out of 5(17 reviews)
Jonathan (verified owner) –
5 Stars!!
Scott (verified owner) –
This is my go-to now for off road parts.
Justin (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Kenneth (verified owner) –
*****
Adam (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Eric (verified owner) –
Very fast delivery.
Chad (verified owner) –
Good quality, really nice.