Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
Toyota Tacoma Overhead MOLLE Panel | 2016-2023
- Suits 2016-2023 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 3″ (at rear dome light)
- Bolt-on installation, bolts where the factory grab handles were (not to be reinstalled)
- Approximate Molle mounting area is 9″ x 37″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
$228.00
In StockDescription
Get the most out of your Tacoma’s ceiling space with All-Pro Off-Road’s Tacoma Overhead MOLLE Panel
2016-2023 Tacoma Overhead MOLLE Panel
All-Pro Off-Road’s 2016-2023 Tacoma Overhead Molle Panel is designed to maximize the storage space of your Tacoma. It offers customizable mounting for all of your gear. The Overhead Molle Panel provides mounting options for rifles, bear spray, flashlights, tire pressure gauges, and just about anything else you can think of that fits in a pouch. The available mounting area on the panel is 9″ x 37″. The panel mounts to the roof above the rear seat and does not cover the rear dome light. You can mount gear to the bottom of the rack and also place small items between the rack and roof. The panel is a completely “bolt-on” product with no drilling required for installation. The panel is CNC cut and formed from 14-gauge steel and comes standard with a long-lasting black powder coat finish. If desired, aftermarket grab handles should be purchased since the panel is not compatible with the original Tacoma grab handles.
NOTE: Customers are encouraged to mount heavier items closer to the sides where the rack mounts to the roof. It is up to the customer’s good judgment to not overload the rack.
- Suits 2016-2023 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 3″ (at rear dome light)
- Bolt-on installation
- Approx. Molle mounting area is 9″ x 37″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
Vehicle Suitability
2016 Toyota Tacoma Molle Panel
2017 Toyota Tacoma Molle Panel
2018 Toyota Tacoma Molle Panel
2019 Toyota Tacoma Molle Panel
2020 Toyota Tacoma Molle Panel
2021 Toyota Tacoma Molle Panel
2022 Toyota Tacoma Molle Panel
2023 Toyota Tacoma Molle Panel
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
-
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
Additional information
| Weight | 11 lbs |
|---|
12 reviews for Toyota Tacoma Overhead MOLLE Panel | 2016-2023
You must be logged in to post a review.
You may also like…
-
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed Stiffener Kit | 2005-2023
- Suits 2005 to 2023 Toyota Tacoma, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Recommended especially for tire clearance modifications or extra weight in the bed
- Provides additional tie down points for cargo
- Antenna whip or light mounting tab
- Some drilling is required for installation
- Installation Instructions
- Made in the USA!!
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed MOLLE Panel | 2005-2023
- Suits 2005-2023 Toyota Tacoma, short or long bed
- Adds an awesome mounting area against the back bed wall, below your back window, to attach all sorts of items to
- The panel can also be used to provide additional tie down locations for securing gear in the bed
- You will never run out of uses for this modular mounting panel
- Includes 11 Gauge Steel Molle Panel and Mounting Brackets
- Zinc Plated Mounting Hardware
- Panel has a Black Powder Coat Finish
- Compatible With or Without Factory Front Bed Accessory Bar
- .44” and .20”. Nominal Diameter Round Mounting Holes
- No Drilling is Required for Installation
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Short and Long Bed designs have different shapes and mounting holes, see photos to show the differences – they are not interchangeable
- Made in the USA!!
(10 reviews)
Related products
-
Suspension
Dobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Pickup Trucks
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons MRA59-A220 3-Way Adjustable MRR Front Struts Extended Travel Pair
- Suits 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470, Toyota Prado 120, and 2005-2015 Toyota Hilux Vigo
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Resi brackets bolt in between the stock front sway bar mount
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
(20 reviews) -
Dobinsons
Dobinsons 1/2″ Lift Alloy Strut Spacer | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits various vehicles, as listed below
- Dobinsons PS59-4030 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Fits between the strut top mount and the chassis of the vehicle
- Note: See 2nd photo to make sure you have enough threads left to install the spacer. This vehicle came with short studs that don’t allow the spacer to be installed without changing out to thicker studs
(12 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons 0-3″ Lift Kit Toyota Tacoma 2016-2023 with Blocks or AAL
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- All lift heights are based on the baseline of 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. A 3″ front lift is 23″ for example. Some Tacoma’s come with 1″ lift from the factory
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Normal kit Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- You can now select to use Wheeler’s Add-A-Leaf Kit instead of the Quick Ride Kit if you’d prefer
- For rear lift, choose either the Quick Ride Kit or an Add-A-Leaf kit
- Select desired lift height and additional options
(13 reviews)
Aaron (verified owner) –
This is my go-to now for off road parts.
William (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
David (verified owner) –
Great description on the page, easy to understand what I was buying.
Kevin (verified owner) –
Value for money, super satisfied.
Shawn (verified owner) –
Great description on the page, easy to understand what I was buying.
David (verified owner) –
Just what I needed.
Anthony (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Steven (verified owner) –
It’s exactly what I wanted.
Travis (verified owner) –
Value for money, super satisfied.
Nathan (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Jeremy (verified owner) –
Would definitely buy from this site again.
Aaron (verified owner) –
This is my go-to now for off road parts.