You may be interested in…

• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips

  $95.00 Add to cart
• 

  Dobinsons

  Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22

  • Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold in pairs
  • Photo for illustration purposes

  $120.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  On Backorder

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  ETA is July 2024

  Dobinsons Tubular UCA Kit | 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
  • Complete ASSEMBLED kit for both left and right hand side, includes new ball joints OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height, as factory alignment correction will be enhanced with these
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Curved washers face outwards away from bushings during installation, per the product video
  • Product Video
  • Includes left and right assembled arms, ball joint caps, and hardware to mount ABS lines
  • Also sold without ball joints

  $795.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
  • Complete kit for both left and right hand side
  • High clearance design to clear pretty much every coilover size available
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • Adds 2 or 3 degrees of added caster, and caster can be further adjusted
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • Video on YouTube showing features and Installation
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Bump Stops

  Wheeler’s Rear Superbumps for 95+ Tacoma and 99-06 Tundra

  • Suits the following vehicles: 1995-2023 Tacoma and 1999-2006 Toyota Tundra
  • Bolts in easily and quickly to replace the firm factory bump stops
  • Includes necessary bump stops (2), goes under the factory u-bolts
  • Made of a super durable micro-cellular polyurethane formula
  • Provides controlled, progressive and comfortable bottoming response from your front suspension
  • Installation Instructions

  $221.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
  • 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
  • EDP Surface Protection, Direct Bolt-On Design
  • Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
  • 14.2″ compressed length, 24.2″ extended length
  • Installation Instructions
  • Works with factory brake line length and OE bump stop length, no extensions required
  • Includes reservoir brackets and hardware
  • SOLD IN PAIRS

  $1,150.00 Add to cart
• 

  • 
  • 
  • 

  Front Bumpers

  WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT

  • Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
  • This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
  • Photos are shown with all added accessories.  This is for the base bumper only, no winch or under protection plates are included
  • Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
  • Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
  • Winch Positioned To Deliver Maximum Airflow To The Engine Bay
  • Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
  • Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
  • Limited 1 Year Warranty
  • Type: 1-Piece
  • Tubular: No
  • Air Bag Compatible: No
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Drilling Required: No
  • Hitch Type: Without Receiver
  • Maximum Gross Trailer Weight: Without Receiver
  • Maximum Tongue Weight: Without Receiver
  • With Grille Guard: No
  • With Grille Screen: No
  • With Bull Bar: Yes
  • With Winch Mount: Yes
  • Winch Compatible: Yes
  • Tow Hooks: With Tow Hook Mounts
  • D-Rings: With D-Rings
  • With Light Cutouts: No
  • Light Type: No Lights
  • With Mounting Hardware: Yes
  • With Skid Plate: No
  • With Spare Tire Mount: No
  • With License Plate Mount: Yes
  • With Jacking Points: No
  • With CB Antenna Mount: No
  • Estimated Install Time (Hours): 2
  • Installation Instructions
  • Optional Front Skid Plate Can Be Added

  $999.99 Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A710 3-Way Adjustable MRA Front Struts | Tundra 2007-2021

  • Pair of Struts only, no coils included and not preassembled
  • If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
  • See attached photo for correct hose routing, can vary depending on UCA’s used
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • SOLD IN PAIRS
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs – sold separately
  • Front coilover assembly instructions
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
  • Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
  • Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping

  $1,790.00 Add to cart