You may be interested in…

• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A446 3-Way Adjustable Front Struts Pair | Tundra 22+, Sequoia 23+

  • Suits Toyota Tundra 2022-2025+ and Toyota Sequoia 2023-2025+
  • Can be used with OEM coils or with Dobinsons lifted coils
  • Height adjustable with a fully threaded body
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • SOLD IN PAIRS
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately
  • Must mount the banjo fitting and hose inwards on MRA struts
  • Coil seat for MRA59-A446 should be set at 175mm (6.87″) from the strut bushing eye
  • Installation Instructions

  Rated 5.00 out of 5

  (14 reviews)

  $1,410.00 Add to cart
• 

  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons GS59-713 Pair of Rear Shocks | Toyota Sequoia 2008-2022

  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Sold in Pairs
  • Dobinsons GS59-713 Specifications: 471mm extended, 315mm compressed
  • Add this kit when buying these shocks if you will be using these for 2.5″of lift

  Rated 5.00 out of 5

  (6 reviews)

  $310.00 Add to cart
• 

  • 
  • 
  • 

  100 Series Land Cruiser IFS (1998-2007)

  FREE SHIPPING
  within 48 US States

  Dobinsons Tubular UCA Pair | Land Cruiser 100 + Lexus LX470 1998-2007

  • For Toyota Land Cruiser 100 Series and Lexus LX470 1998-2007 models
  • Not compatible with AHC, it does not have the bracket in place
  • Complete kit for both left and right hand side, includes new 555 ball joints installed, OE style rubber frame bushings installed, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Has more clearance around the ball joint than factory UCA’s for better tire clearance
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints
  • Replacement Ball Joints can be ordered here

  Rated 5.00 out of 5

  (10 reviews)

  $795.00 Add to cart
• 

  • 
  • 
  • 

  4Runner 3rd Gen (1996-2002)

  FREE SHIPPING
  within 48 US States

  Dobinsons 2-2.5″ 3-Way Adjustable MRA 4Runner Coilovers for 1996-2002

  • Suits 1996-2002 Toyota 4Runner 4×4 Models
  • Looking for a quick and easy way to lift your 4Runner?  This is your answer
  • Extended Travel MRA59-A222 Coilovers – 458mm extended, 335mm compressed lengths
  • Dobinsons MRA are height adjustable by a fully threaded body
  • The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS – READY TO BOLT IN
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Photos for illustration purposes
  • Instructions for setting coil seat height
  • It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
  • Link to matching rear shocks
  • Please NOTE: Assembled coilovers cannot be returned, as they are made to order

  Rated 5.00 out of 5

  (2 reviews)

  $1,820.00 Select options
• 

  Brake Lines

  FREE SHIPPING
  within 48 US States

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips
  • This set is BLACK in color

  Rated 5.00 out of 5

  (26 reviews)

  $120.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons IMS59-60786 Front Ext Travel 2.6″ IFP Shocks Pair | Land Cruiser 100 Series (2-2.5″ lift)

  • Suits Toyota Land Cruiser 100 Series and Lexus LX470 Front End
  • Requires full diff drop kit and UCA’s before installation
  • Front shocks only.  To order full kit, click here
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 470mm extended and 315mm compressed

  Rated 5.00 out of 5

  (17 reviews)

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Tundra 2nd Gen (2007-2021)

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A710 3-Way Adjustable MRA Front Struts Pair | Tundra + Sequoia

  • Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
  • Pair of Struts only, no coils included and not preassembled
  • If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
  • 625mm extended length, 450mm compressed length
  • Height adjustable with a fully threaded body
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
  • See attached photo for correct hose routing, can vary depending on UCA’s used
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Reservoir Brackets and Hardware and Sticker Pack
  • SOLD IN PAIRS
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs – sold separately
  • Front coilover assembly instructions
  • New UCA’s are required for proper coilover and hose clearance, see all options
  • Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
  • Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
  • Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping

  Rated 5.00 out of 5

  (12 reviews)

  $1,790.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A222 3-Way Adjustable MRA Extended Travel Front Struts Pair

  • Suits 2001-2007 Toyota Sequoia 4×4, 1998-2004 Toyota Tacoma 4×4, 2000-2006 Toyota Tundra 4×4, 1996-2002 Toyota 4Runner 4×4
  • Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
  • Height adjustable with a fully threaded body
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • 458mm extended length, 335mm compressed
  • Standard coil seat height is 164mm
  • Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately
  • The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
  • Instructions for setting coil seat height

  Rated 5.00 out of 5

  (15 reviews)

  $1,280.00 Add to cart
• 

  Dobinsons

  Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22

  • Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
  • Designed to exact OE specs, using all new rubber bushes, washers and seats
  • New zinc coated hardware for corrosion resistance
  • Allows faster assembly of new components, not needing to disassemble used parts
  • Enough for 1 vehicle, sold in pairs
  • Photo for illustration purposes

  Rated 5.00 out of 5

  (7 reviews)

  $120.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA45-A912 3-Way Adjustable MRA Front Shocks Pair | 80 Series 4″ Lift

  • Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 4″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Installation Instructions of the MRA Shocks
  • 667mm extended, 401mm compressed
  • Bump stop extensions and longer brake lines must be run with these longer shocks
  • Full 2 year limited warranty, no set rebuild time period

  Rated 5.00 out of 5

  (15 reviews)

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  FREE SHIPPING
  within 48 US States

  Dobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks Pair

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
  • 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
  • EDP Surface Protection, Direct Bolt-On Design
  • Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
  • 14.2″ compressed length, 24.2″ extended length
  • Installation Instructions
  • Works with factory brake line length and OE bump stop length, no extensions required
  • Includes reservoir brackets and hardware
  • SOLD IN PAIRS

  Rated 5.00 out of 5

  (16 reviews)

  $1,150.00 Add to cart
• 

  Timbren

  FREE SHIPPING
  within 48 US States

  Timbren Bump Stops Front & Rear | Land Cruiser 80 Series 1990-1997

  • Suits 1990-1997 Land Cruiser 80 Series and Lexus LX450
  • Includes both Front and Rear bump stops for the whole vehicle
  • Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
  • Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
  • ABSTORLC1 replaces the rear OEM bump stops and ABSTOFLC1A replaces the fronts on the Land Cruiser 80 Series. Upgrade to Active Off-road Bumpstops and experience the difference.
  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Clearancing of the rear brackets and the bump stop cups may be required on some long travel setups to avoid clearance issues with the coil springs
  • Front Instructions and Rear Instructions

  Rated 5.00 out of 5

  (11 reviews)

  $538.72 Add to cart