Your cart is currently empty!
FREE SHIPPING
within 48 US States
within 48 US States
ARB 5421100 Skid Plate Kit | Toyota 4Runner 4th Gen 2003-2009
- Suits all Toyota 4Runner 4th Gen models from 2003 to 2009. Also fits 5th Gen 4runners without KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
$579.95
In StockDescription
ARB 5421100 Under Vehicle Protection Kit | Toyota 4Runner 2003-2009 4th Gen
Designed to give protection to vital underbody components including steering, engine sump, transmission and transfer case, ARB 5421100 Under Vehicle Protection Panels are laser cut, press formed and folded to provide protection to vulnerable under body components.
ARB’s new line of Skid Plates are just the thing for protecting you from that challenging off-road terrain that often has those unexpected obstacles that can cause the most vehicle destructive damage.
Designed to protect all of your vital under-body components from end to end, be reassured that your steering, oil pan and transfer cases will all be safe.
The ARB 5421100 Under Vehicle Protection will fit with or without an ARB front bar. Fitment has not been confirmed with other bar designs.
Specifications
Press formed and expertly folded for optimum strength to weight.
The first skid plate panel system specifically designed for SUVs, these panels feature the same construction as the current range of panels, i.e. pressed and folded 3mm steel.
Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
ARB 5421100 Key Features
Manufactured from 3mm zinc-plated and powder-coated, Laser cut steel. pressed and folded sheet steel adds more strength than a standard folded sheet.
The transmission panel is common to both kits and also to petrol and diesel engine variants. It has a two position mounting bracket providing a lower mount for petrol engine vehicles where the exhaust sits lower than diesel models.
Underbody
Designed to protect vital underbody components including steering, engine oil pan, transmission and transfercase
Vehicle Chassis
Securely bolted to the vehicle’s chassis providing outstanding structural integrity
CAUTION is required when removing foreign matter with hands while vehicle is hot or running. Replace any components as necessary.
Textured Finish
All steel components are zinc plated and powder coated in a silver textured finish
Service
Easily removed for vehicle servicing.
During servicing when panels are removed ensure fasteners are re-fitted to the correct torque values.
Vehicle Fitment:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
Additional information
| Weight | 55 lbs |
|---|
8 reviews for ARB 5421100 Skid Plate Kit | Toyota 4Runner 4th Gen 2003-2009
You must be logged in to post a review.
Related products
-
DobinsonsDobinsons Adjustable Rear Sway Bar End Link Kit | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS)
- Order 1 for 1 vehicle
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Will also suit stock non-lifted vehicles simply looking to replace their worn out rear links
- Adjustable to suit lift heights of 2″ to 4″
- Length measured from the center of the lower ball joint to where the first washer sits – 125mm – 165mm (5.0″ – 6.5″)
- Watch a video here to see more about these:Â https://youtu.be/lZACSaE2PHI
- Note: Product was updated to bigger/thicker stud of the ball joint in 2020, no longer needing the small sleeve shown in the product video. Some vehicles’ sway bar is too thick to use the thick supplied washer, so reuse the stock washer if necessary
(15 reviews) -
Dobinsons
Dobinsons C59-677V Rear Variable Rate Long Travel Coils | Toyota 4Runner FJ Cruiser GX470 GX460 – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 500mm free height, 16mm wire diameter, 157-230LBF/IN variable spring Rate
- Rear Long Travel Coils Installation Guide
(23 reviews)$350.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for 4×4 Trucks and SUV’s – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
- This is a comparable option to OME 2884 coils, which are 390mm free height, 16mm wire, 590LBF/in spring rate
(15 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons Strut Top Plates Pair | Toyota and Lexus Trucks & SUV’s
- Suits Toyota Tacoma 2005-23, Toyota 4Runner 2003-24, Toyota FJ Cruiser (all years), Toyota Prado 120, Toyota Prado 150, Toyota Hilux 2005-2023, Toyota Fortuner 2005-2024, Lexus GX470, Lexus GX460
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold as pairs
- Product comes exactly as shown in the photo
- Nut size – M10 x 1.25 nylock – easy to find locally to you if you lose or damage one
- Can also add the labor to have struts, coils, and these top mounts assembled, click here to add that
- Installation instructions
(18 reviews)
Edward (verified owner) –
Would definitely buy from this site again.
Jeffrey (verified owner) –
5 Stars!!
Aaron (verified owner) –
Just what I needed.
Matthew (verified owner) –
Very fast delivery.
Nicholas (verified owner) –
*****
Kevin (verified owner) –
Very fast delivery.
Edward (verified owner) –
Exit Offroad really does know what they’re talking about, they have the best product pages.
Bradley (verified owner) –
I received it really fast.