Bilstein 47-310049 Front 6112 Series Kit | 1st Gen Sequoia + Tundra

Bilstein 6112 Series Ride Height Adjustable Front Coilover Kit
Suits 2000-2006 Toyota Tundra 4×4 and 2001-2007 Toyota Sequoia 4×4
Sold as a set, 1 per vehicle
Includes pair of 60mm struts, pair of coils, and pair of top strut nuts
Reservoir: No
Finish: Zinc Plated
Body Design: 60mm ID snap ring grooved body (Coilover)
Internal Design: Mono tube
Boot Included: No
Coil Springs Included: Yes
Strut mounts are not included – use OE strut mounts and bushings/washers
Installation Instructions

Original price was: $966.21.Current price is: $826.00.

Out of stock

EAN: 651860868752 SKU: 47-310049 Categories: Bilstein, Coilovers, Exceptions, Full Suspension Kits - Sequoia 1st Gen, Full Suspension Kits - Tundra 1st Gen, Sequoia 1st Gen (2001-2007), Struts + Shocks - Sequoia 1st Gen, Struts and Shocks, Suspension, Tundra 1st Gen (2000-2006) Brand: Bilstein

Description
Additional information

Description

SPECIFICATIONS

Bilstein | Part Number: 47-310049
Hydraulic: Gas Charged
Top Mount: OEM
Bottom Mount: Eyelet
Fitment: Direct Fit
Shock Type: Coilover
Lift Height: 0-2.5″
Position: Front
Shock Series: 60mm Monotube
Body Diameter: 60mm
Location: Front
WARRANTY INFORMATION

Bilstein 47-310049 PRODUCT OVERVIEW

Bilstein 47-310049 B8 6112 leveling kits are designed to provide more ground clearance, allow for larger tires, and increase wheel travel. Multiple snap-ring grooves in the body allow for different spring seat positions, providing 0-2.75 inches of front lift (depending on application). These kits consist of (2) 60mm shock absorbers combined with (2) custom matched cold wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Experience the legendary Bilstein off-road experience with the best direct fit spring and shock kit for your light truck or SUV.

Bilstein 47-310049 FITS THE FOLLOWING:

2000-2006 Toyota Tundra 4×4
2001-2007 Toyota Sequoia 4×4

MANUFACTURER

While the ThyssenKrupp Bilstein Company began as a German enterprise, Bilstein shocks are developed and manufactured in Hamilton, Ohio. Bilstein develops and fabricates premium quality monotube shock absorbers directly for automobile manufactures, aftermarket outfits and motorsports applications. The precision and craftsmanship in manufacturing that fueled company growth in Germany were brought straight to the factory in Hamilton, Ohio. The factory includes an engineering department, rigorous shock testing facility and a motorsports track. The track allows the engineers to tweak their designs in response to real world testing during development. The rigorous testing allows for designs to go through a machine simulated life of a shock absorber in all kinds of terrain conditions. The resulting products promise the highest in performance

Bilstein 6112 for Toyota Tundra 1st Gen. Bilstein 6112 for Toyota Sequoia 1st Gen

2001 Toyota Sequoia Lift Kit
2002 Toyota Sequoia Lift Kit
2003 Toyota Sequoia Lift Kit
2004 Toyota Sequoia Lift Kit
2005 Toyota Sequoia Lift Kit
2006 Toyota Sequoia Lift Kit
2007 Toyota Sequoia Lift Kit

2000 Toyota Tundra Lift Kit
2001 Toyota Tundra Lift Kit
2002 Toyota Tundra Lift Kit
2003 Toyota Tundra Lift Kit
2004 Toyota Tundra Lift Kit
2005 Toyota Tundra Lift Kit
2006 Toyota Tundra Lift Kit

Additional information

Weight	45 lbs

Related products

Exceptions
Ships FREE !!
within 48 US States
Dobinsons MRA59-A575 3-Way Adjustable MRA Long Travel Rear Shocks
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 & GX460 without KDSS, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- CANNOT BE USED WITH KDSS
- 3-way adjustable valving – adjust high and low speed compression and rebound
- MRA59-A575 – Specifications. 730mm extended, 443mm compressed
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Can Use with Timbren Rear Bump Stop Kit
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stops extensions or longer bump stops are required!!
- Full 2 year limited warranty, no set rebuild time period
- Now comes with a longer hose and different mounting instructions
$1,280.00 Add to cart
On Backorder
Exceptions
Ships FREE !!
within 48 US States
ETA is Summer 2024
Dobinsons MRA59-A220 3-Way Adjustable MRA Front Struts Extended Travel
- Suits 2003-2009 4th Gen 4Runner, 2006-2009 FJ Cruiser, 2005-2023 Tacoma (2nd and 3rd Gen Tacoma), Lexus GX470, Toyota Prado 120, and 2005-2015 Toyota Hilux Vigo
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Bolt-on Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Resi brackets bolt in between the stock front sway bar mount
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Instructions for setting coil seat height
- Resi installation instructions
$1,280.00 Add to cart
Dobinsons
Dobinsons C59-327 Rear Coils | Toyota 4Runner FJ Cruiser GX470 GX460
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 410mm free height, 18mm wire diameter, 271LBF/IN Spring Rate
$270.00 Select options
Dobinsons
Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
- Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- Instructions written down below in the description
$345.00 Add to cart