You may be interested in…

• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  $69.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum UCA’s | 200 Series Land Cruiser

  • Super strong billet aluminum front upper control arms (UCA’s)
  • Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • *Must reuse OEM Washers
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Photos for illustration purposes

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Brakes

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Powerbrake X-Line 4×4 Toyota Tundra Big Brake Kit for 2000-2006 Stage 1

  2000-2006 Toyota Tundra Big Brake Kit Includes:

  • X-Line billet 6-piston off-road calipers (pair)
  • High-performance brake pads, pre-loaded into the calipers
  • 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
  • Curved, directional cooling vanes
  • Billet caliper mounting brackets
  • Stainless steel braided brake lines
  • All necessary mounting hardware for quick, easy bolt-on installation
  • Comprehensive fitment and bed-in instructions
  • For 6-Lug models only (Pre-Runner and 4×4 models)
  • Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
  • Manufactured, finished and packaged 100% in South Africa
  • REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE

  $2,675.00 Select options
• 

  • 
  • 
  • 

  MRA Remote Resi 3-Way Adjustable Monotube

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Shock Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 609mm extended, 389mm compressed
  • SOLD IN PAIRS
  • Now comes with a longer hose and different mounting instructions

  $1,150.00 Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  OVS SCAR Waterproof 12K Winch | Synthetic Rope | Wireless Remote

  • Single Line Rated Pull: 12,000lb
  • Motor: 7.0hp Series Wound
  • Waterproof: IP68 Rated
  • Voltage: 12V
  • Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
  • Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
  • Gear Ratio: 218:1
  • DB Output: Low (it’s quiet)
  • Clutch: Rotating Ring Gear
  • Braking Action: Automatic Out-Of-Drum
  • Drum Size: 2.5” x 8.8”
  • Mounting Bolt Pattern: 10” x 4.5”
  • Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
  • Line Speed: 42’ Per Minute
  • Steel Cable: 3/8” x 85’
  • Hook: Heavy Duty with Clip
  • Fairlead: Aluminum Hawse Fairlead
  • Electric Cable: 70” x 25 mm2
  • Solenoid: 500A (Heavy – Duty)
  • Recommended Battery: 650CCA Minimum.
  • Weight: 66 lbs
  • Warranty: Limited Lifetime Warranty Mechanical,
  • 5 Year Electrical

  $599.99 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Bronco 2021-2024+

  Ships FREE !!
  within 48 US States

  Fox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 2DR Ford Bronco – 883-06-192

  • Suits: Front – Ford Bronco (fullsize) 2021+ 2-Door Models
  • Lift Height: 2-3″ with Sasquatch package, 3.5-4.5″ without Sasquatch package
  • Requires Aftermarket UCA’s for coilover clearance and articulation
  • Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
  • Body Plating: Hard-anodized for a durable finish
  • Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
  • Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
  • Spring Application: specific, custom progressive springs
  • Shaft: 7/8″ hard chrome plated steel shafts
  • Valving: Application specific valving to maximize performance
  • Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
  • Bearing: PTFE-lined, heat-treated, alloy steel spherical
  • Adjustments: Ride height preload ring
  • Adjuster Type: DSC – Dual Speed Compression
  • Extended: 23.720″
  • Compressed: 17.940″
  • Travel: 5.780″
  • Top Mount: OEM
  • Bottom Mount: Bar Pin
  • Includes Reservoir Mounts
  • Exploded View Diagram »
  • Installation Guide »

  $2,399.95 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  Dobinsons Tubular UCA Kit | Land Cruiser 200 Series + Lexus LX570

  • Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
  • These arms come fully assembled with the ball joints and bushings installed
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel
  • 5mm (0.2″) wall thickness
  • Powder coated black
  • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints

  $795.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Skid Plates

  On Sale For Memorial Day!!

  Rear Shock Mount Skids | 2010-2024 4Runner FJ Cruiser GX460

  • Includes one pair of rear shock mount skid plates (Driver/Passenger)
  • Protects low hanging shock mounts on all 2010-2024 4Runner, FJ Cruiser and Lexus GX460 models
  • Includes all hardware for installation
  • Product includes a heavy duty black powder coat finish
  • Made in USA

  $113.99 Original price was: $113.99.$103.00Current price is: $103.00. Add to cart
• Sale!

  

  • 
  • 
  • 

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Black Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Black
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  Warn 103255 VR Evo 12-S Winch 12K | Synthetic Rope

  • Winch; VR12-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 12000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
  • Black Tactical Look Puts You At The Head Of The Off-Road Pack
  • Waterproof Albright® Contactor Control For The Ultimate In Reliability
  • One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
  • Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
  • Powerful, Efficient Series-Wound Motor
  • Best-In-Class Load-Holding Cone Brake For Superior Control
  • Limited 7 Year Warranty
  • Winch Rating: 12000 Pound
  • Recommended Use: Jeep/Truck/SUV
  • Operation Type: Electric
  • Mount Type: Fixed Mount
  • Voltage: 12 Volt
  • Free Spooling: Yes
  • Line Length (FT): 90 Feet
  • Line Material: Synthetic
  • Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
  • Brake Type: Spring Applied Disc
  • Max Amp Draw: 396 Amp Draw At 12000 Pound
  • Gear Reduction Ratio: 234:1
  • Includes Mounting Hardware: Yes
  • Thermal Shutoff: No
  • Color: Black
  • Fairlead Type: Hawse
  • Remote Type: Wired
  • Line Speed At Max Pull: 4 Feet Per Minute At 12000 Pound
  • Electrical Control Type: Contactors
  • Motor Type: Series Wound
  • Drive Gear Type: Planetary
  • Line Diameter (IN): 3/8 Inch
  • Mounting Hole Quantity: 4
  • Drum Material: Steel
  • Estimated Install Time (Hours): 2
  • Warn Warranty information is all listed here: https://www.warn.com/warranties

  $979.98 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 

  Timbren

  Ships FREE !!
  within 48 US States

  Timbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s

  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series

  • Specs:

    • 2,000 lb capacity
    • 4,800 lb bump load capacity
    • Overall kit height = 5”
    • Total deflected (compressed) height = 2.75”
    • Amount of deflection (compression) = 2.25”
  • Click here for instructions
  • Installation video from Exit Offroad
  • Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs.  Timbren make 2 options, they do not include any longer bolts which may be required
    • A25722-90F00 (1/2″ spacer)
    • A25723-90AD00 (1″ spacer)

  $269.36 Add to cart